From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt | 11 ++++++-----
1 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt b/kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt
index ef89ab4..3f977e7 100644
--- a/kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ b/kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt
@@ -1,6 +1,6 @@
* ARM PrimeCell Color LCD Controller PL110/PL111
-See also Documentation/devicetree/bindings/arm/primecell.txt
+See also Documentation/devicetree/bindings/arm/primecell.yaml
Required properties:
@@ -39,9 +39,11 @@
- port: describes LCD panel signals, following the common binding
for video transmitter interfaces; see
- Documentation/devicetree/bindings/media/video-interfaces.txt;
- when it is a TFT panel, the port's endpoint must define the
- following property:
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Deprecated properties:
+ The port's endbpoint subnode had this, now deprecated property
+ in the past. Drivers should be able to survive without it:
- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
defining the way CLD pads are wired up; first value
@@ -80,7 +82,6 @@
port {
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
--
Gitblit v1.6.2