From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/arm/coresight.txt | 211 ++++++++++++++++++++++++++++++++++++----------------
1 files changed, 146 insertions(+), 65 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/arm/coresight.txt b/kernel/Documentation/devicetree/bindings/arm/coresight.txt
index 410e09e..7f9c1ca 100644
--- a/kernel/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/kernel/Documentation/devicetree/bindings/arm/coresight.txt
@@ -8,7 +8,8 @@
sink. Each CoreSight component device should use these properties to describe
its hardware characteristcs.
-* Required properties for all components *except* non-configurable replicators:
+* Required properties for all components *except* non-configurable replicators
+ and non-configurable funnels:
* compatible: These have to be supplemented with "arm,primecell" as
drivers are using the AMBA bus interface. Possible values include:
@@ -24,15 +25,20 @@
discovered at boot time when the device is probed.
"arm,coresight-tmc", "arm,primecell";
- - Trace Funnel:
- "arm,coresight-funnel", "arm,primecell";
+ - Trace Programmable Funnel:
+ "arm,coresight-dynamic-funnel", "arm,primecell";
+ "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
+ backward compatibility and will be removed)
- Embedded Trace Macrocell (version 3.x) and
Program Flow Trace Macrocell:
"arm,coresight-etm3x", "arm,primecell";
- - Embedded Trace Macrocell (version 4.x):
+ - Embedded Trace Macrocell (version 4.x), with memory mapped access.
"arm,coresight-etm4x", "arm,primecell";
+
+ - Embedded Trace Macrocell (version 4.x), with system register access only.
+ "arm,coresight-etm4x-sysreg";
- Coresight programmable Replicator :
"arm,coresight-dynamic-replicator", "arm,primecell";
@@ -41,6 +47,10 @@
"arm,coresight-stm", "arm,primecell"; [1]
- Coresight Address Translation Unit (CATU)
"arm,coresight-catu", "arm,primecell";
+
+ - Coresight Cross Trigger Interface (CTI):
+ "arm,coresight-cti", "arm,primecell";
+ See coresight-cti.yaml for full CTI definitions.
* reg: physical base address and length of the register
set(s) of the component.
@@ -54,9 +64,12 @@
clocks the core of that coresight component. The latter clock
is optional.
- * port or ports: The representation of the component's port
- layout using the generic DT graph presentation found in
- "bindings/graph.txt".
+ * port or ports: see "Graph bindings for Coresight" below.
+
+* Additional required property for Embedded Trace Macrocell (version 3.x and
+ version 4.x):
+ * cpu: the cpu phandle this ETM/PTM is affined to. Do not
+ assume it to default to CPU0 if omitted.
* Additional required properties for System Trace Macrocells (STM):
* reg: along with the physical base address and length of the register
@@ -66,14 +79,23 @@
* reg-names: the only acceptable values are "stm-base" and
"stm-stimulus-base", each corresponding to the areas defined in "reg".
+* Required properties for Coresight Cross Trigger Interface (CTI)
+ See coresight-cti.yaml for full CTI definitions.
+
* Required properties for devices that don't show up on the AMBA bus, such as
- non-configurable replicators:
+ non-configurable replicators and non-configurable funnels:
* compatible: Currently supported value is (note the absence of the
AMBA markee):
- - "arm,coresight-replicator"
+ - Coresight Non-configurable Replicator:
+ "arm,coresight-static-replicator";
+ "arm,coresight-replicator"; (OBSOLETE. For backward
+ compatibility and will be removed)
- * port or ports: same as above.
+ - Coresight Non-configurable Funnel:
+ "arm,coresight-static-funnel";
+
+ * port or ports: see "Graph bindings for Coresight" below.
* Optional properties for all components:
@@ -89,8 +111,12 @@
* arm,cp14: must be present if the system accesses ETM/PTM management
registers via co-processor 14.
- * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
- source is considered to belong to CPU0.
+ * qcom,skip-power-up: boolean. Indicates that an implementation can
+ skip powering up the trace unit. TRCPDCR.PU does not have to be set
+ on Qualcomm Technologies Inc. systems since ETMs are in the same power
+ domain as their CPU cores. This property is required to identify such
+ systems with hardware errata where the CPU watchdog counter is stopped
+ when TRCPDCR.PU is set.
* Optional property for TMC:
@@ -105,6 +131,26 @@
* interrupts : Exactly one SPI may be listed for reporting the address
error
+* Optional property for configurable replicators:
+
+ * qcom,replicator-loses-context: boolean. Indicates that the replicator
+ will lose register context when AMBA clock is removed which is observed
+ in some replicator designs.
+
+Graph bindings for Coresight
+-------------------------------
+
+Coresight components are interconnected to create a data path for the flow of
+trace data generated from the "sources" to their collection points "sink".
+Each coresight component must describe the "input" and "output" connections.
+The connections must be described via generic DT graph bindings as described
+by the "bindings/graph.txt", where each "port" along with an "endpoint"
+component represents a hardware port and the connection.
+
+ * All output ports must be listed inside a child node named "out-ports"
+ * All input ports must be listed inside a child node named "in-ports".
+ * Port address must match the hardware port number.
+
Example:
1. Sinks
@@ -114,10 +160,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etb_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ etb_in_port: endpoint@0 {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -128,10 +175,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -142,22 +190,16 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in_port: endpoint {
- slave-mode;
remote-endpoint = <&replicator2_out_port0>;
};
};
+ };
- /* CATU link represented by output port */
- port@1 {
- reg = <1>;
+ out-ports {
+ port {
etr_out_port: endpoint {
remote-endpoint = <&catu_in_port>;
};
@@ -170,9 +212,9 @@
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -190,58 +232,90 @@
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port0>;
};
};
};
};
+ funnel {
+ /*
+ * non-configurable funnel don't show up on the AMBA
+ * bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-static-funnel";
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ combo_funnel_out: endpoint {
+ remote-endpoint = <&top_funnel_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ combo_funnel_in0: endpoint {
+ remote-endpoint = <&cluster0_etf_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ combo_funnel_in1: endpoint {
+ remote-endpoint = <&cluster1_etf_out>;
+ };
+ };
+ };
+ };
+
funnel@20040000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port0: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
@@ -257,9 +331,11 @@
cpu = <&cpu0>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -271,9 +347,11 @@
cpu = <&cpu1>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -287,9 +365,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint = <&main_funnel_in_port2>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint = <&main_funnel_in_port2>;
+ };
};
};
};
@@ -304,10 +384,11 @@
clock-names = "apb_pclk";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- port {
- catu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&etr_out_port>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
};
};
};
--
Gitblit v1.6.2