From 9999e48639b3cecb08ffb37358bcba3b48161b29 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:17 +0000
Subject: [PATCH] add ax88772_rst
---
kernel/include/linux/mtd/nand.h | 246 ++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 232 insertions(+), 14 deletions(-)
diff --git a/kernel/include/linux/mtd/nand.h b/kernel/include/linux/mtd/nand.h
index 7f53ece..6d19d8c 100644
--- a/kernel/include/linux/mtd/nand.h
+++ b/kernel/include/linux/mtd/nand.h
@@ -12,6 +12,8 @@
#include <linux/mtd/mtd.h>
+struct nand_device;
+
/**
* struct nand_memory_organization - Memory organization structure
* @bits_per_cell: number of bits per NAND cell
@@ -19,6 +21,7 @@
* @oobsize: OOB area size
* @pages_per_eraseblock: number of pages per eraseblock
* @eraseblocks_per_lun: number of eraseblocks per LUN (Logical Unit Number)
+ * @max_bad_eraseblocks_per_lun: maximum number of eraseblocks per LUN
* @planes_per_lun: number of planes per LUN
* @luns_per_target: number of LUN per target (target is a synonym for die)
* @ntargets: total number of targets exposed by the NAND device
@@ -29,18 +32,20 @@
unsigned int oobsize;
unsigned int pages_per_eraseblock;
unsigned int eraseblocks_per_lun;
+ unsigned int max_bad_eraseblocks_per_lun;
unsigned int planes_per_lun;
unsigned int luns_per_target;
unsigned int ntargets;
};
-#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt) \
+#define NAND_MEMORG(bpc, ps, os, ppe, epl, mbb, ppl, lpt, nt) \
{ \
.bits_per_cell = (bpc), \
.pagesize = (ps), \
.oobsize = (os), \
.pages_per_eraseblock = (ppe), \
.eraseblocks_per_lun = (epl), \
+ .max_bad_eraseblocks_per_lun = (mbb), \
.planes_per_lun = (ppl), \
.luns_per_target = (lpt), \
.ntargets = (nt), \
@@ -78,7 +83,18 @@
};
/**
+ * enum nand_page_io_req_type - Direction of an I/O request
+ * @NAND_PAGE_READ: from the chip, to the controller
+ * @NAND_PAGE_WRITE: from the controller, to the chip
+ */
+enum nand_page_io_req_type {
+ NAND_PAGE_READ = 0,
+ NAND_PAGE_WRITE,
+};
+
+/**
* struct nand_page_io_req - NAND I/O request object
+ * @type: the type of page I/O: read or write
* @pos: the position this I/O request is targeting
* @dataoffs: the offset within the page
* @datalen: number of data bytes to read from/write to this page
@@ -94,6 +110,7 @@
* specific commands/operations.
*/
struct nand_page_io_req {
+ enum nand_page_io_req_type type;
struct nand_pos pos;
unsigned int dataoffs;
unsigned int datalen;
@@ -110,27 +127,96 @@
int mode;
};
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void);
+
/**
- * struct nand_ecc_req - NAND ECC requirements
- * @strength: ECC strength
- * @step_size: ECC step/block size
+ * enum nand_ecc_engine_type - NAND ECC engine type
+ * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value
+ * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction
+ * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction
*/
-struct nand_ecc_req {
+enum nand_ecc_engine_type {
+ NAND_ECC_ENGINE_TYPE_INVALID,
+ NAND_ECC_ENGINE_TYPE_NONE,
+ NAND_ECC_ENGINE_TYPE_SOFT,
+ NAND_ECC_ENGINE_TYPE_ON_HOST,
+ NAND_ECC_ENGINE_TYPE_ON_DIE,
+};
+
+/**
+ * enum nand_ecc_placement - NAND ECC bytes placement
+ * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown
+ * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area
+ * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes
+ * interleaved with regular data in the main
+ * area
+ */
+enum nand_ecc_placement {
+ NAND_ECC_PLACEMENT_UNKNOWN,
+ NAND_ECC_PLACEMENT_OOB,
+ NAND_ECC_PLACEMENT_INTERLEAVED,
+};
+
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
+ */
+enum nand_ecc_algo {
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
+};
+
+/**
+ * struct nand_ecc_props - NAND ECC properties
+ * @engine_type: ECC engine type
+ * @placement: OOB placement (if relevant)
+ * @algo: ECC algorithm (if relevant)
+ * @strength: ECC strength
+ * @step_size: Number of bytes per step
+ * @flags: Misc properties
+ */
+struct nand_ecc_props {
+ enum nand_ecc_engine_type engine_type;
+ enum nand_ecc_placement placement;
+ enum nand_ecc_algo algo;
unsigned int strength;
unsigned int step_size;
+ unsigned int flags;
};
#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+/* NAND ECC misc flags */
+#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0)
+
+/* nand_bbt option */
+#define NANDDEV_BBT_SCANNED BIT(0)
+
+/* The maximum number of blocks to scan for a bbt */
+#define NANDDEV_BBT_SCAN_MAXBLOCKS 4
+
/**
* struct nand_bbt - bad block table object
* @cache: in memory BBT cache
+ * @option: the option of BBT
+ * @version: current memory BBT cache version
*/
struct nand_bbt {
unsigned long *cache;
+#ifdef CONFIG_MTD_NAND_BBT_USING_FLASH
+ unsigned int option;
+ unsigned int version;
+#endif
};
-
-struct nand_device;
/**
* struct nand_ops - NAND operations
@@ -155,10 +241,79 @@
};
/**
+ * struct nand_ecc_context - Context for the ECC engine
+ * @conf: basic ECC engine parameters
+ * @total: total number of bytes used for storing ECC codes, this is used by
+ * generic OOB layouts
+ * @priv: ECC engine driver private data
+ */
+struct nand_ecc_context {
+ struct nand_ecc_props conf;
+ unsigned int total;
+ void *priv;
+};
+
+/**
+ * struct nand_ecc_engine_ops - ECC engine operations
+ * @init_ctx: given a desired user configuration for the pointed NAND device,
+ * requests the ECC engine driver to setup a configuration with
+ * values it supports.
+ * @cleanup_ctx: clean the context initialized by @init_ctx.
+ * @prepare_io_req: is called before reading/writing a page to prepare the I/O
+ * request to be performed with ECC correction.
+ * @finish_io_req: is called after reading/writing a page to terminate the I/O
+ * request and ensure proper ECC correction.
+ */
+struct nand_ecc_engine_ops {
+ int (*init_ctx)(struct nand_device *nand);
+ void (*cleanup_ctx)(struct nand_device *nand);
+ int (*prepare_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+ int (*finish_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+};
+
+/**
+ * struct nand_ecc_engine - ECC engine abstraction for NAND devices
+ * @ops: ECC engine operations
+ */
+struct nand_ecc_engine {
+ struct nand_ecc_engine_ops *ops;
+};
+
+void of_get_nand_ecc_user_config(struct nand_device *nand);
+int nand_ecc_init_ctx(struct nand_device *nand);
+void nand_ecc_cleanup_ctx(struct nand_device *nand);
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+bool nand_ecc_is_strong_enough(struct nand_device *nand);
+
+/**
+ * struct nand_ecc - Information relative to the ECC
+ * @defaults: Default values, depend on the underlying subsystem
+ * @requirements: ECC requirements from the NAND chip perspective
+ * @user_conf: User desires in terms of ECC parameters
+ * @ctx: ECC context for the ECC engine, derived from the device @requirements
+ * the @user_conf and the @defaults
+ * @ondie_engine: On-die ECC engine reference, if any
+ * @engine: ECC engine actually bound
+ */
+struct nand_ecc {
+ struct nand_ecc_props defaults;
+ struct nand_ecc_props requirements;
+ struct nand_ecc_props user_conf;
+ struct nand_ecc_context ctx;
+ struct nand_ecc_engine *ondie_engine;
+ struct nand_ecc_engine *engine;
+};
+
+/**
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
* @memorg: memory layout
- * @eccreq: ECC requirements
+ * @ecc: NAND ECC object attached to the NAND device
* @rowconv: position to row address converter
* @bbt: bad block table info
* @ops: NAND operations attached to the NAND device
@@ -166,8 +321,8 @@
* Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
* should declare their own NAND object embedding a nand_device struct (that's
* how inheritance is done).
- * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
- * at device detection time to reflect the NAND device
+ * struct_nand_device->memorg and struct_nand_device->ecc.requirements should
+ * be filled at device detection time to reflect the NAND device
* capabilities/requirements. Once this is done nanddev_init() can be called.
* It will take care of converting NAND information into MTD ones, which means
* the specialized NAND layers should never manually tweak
@@ -176,7 +331,7 @@
struct nand_device {
struct mtd_info mtd;
struct nand_memory_organization memorg;
- struct nand_ecc_req eccreq;
+ struct nand_ecc ecc;
struct nand_row_converter rowconv;
struct nand_bbt bbt;
const struct nand_ops *ops;
@@ -269,6 +424,20 @@
}
/**
+ * nanddev_pages_per_target() - Get the number of pages per target
+ * @nand: NAND device
+ *
+ * Return: the number of pages per target.
+ */
+static inline unsigned int
+nanddev_pages_per_target(const struct nand_device *nand)
+{
+ return nand->memorg.pages_per_eraseblock *
+ nand->memorg.eraseblocks_per_lun *
+ nand->memorg.luns_per_target;
+}
+
+/**
* nanddev_per_page_oobsize() - Get NAND erase block size
* @nand: NAND device
*
@@ -289,6 +458,18 @@
nanddev_eraseblocks_per_lun(const struct nand_device *nand)
{
return nand->memorg.eraseblocks_per_lun;
+}
+
+/**
+ * nanddev_eraseblocks_per_target() - Get the number of eraseblocks per target
+ * @nand: NAND device
+ *
+ * Return: the number of eraseblocks per target.
+ */
+static inline unsigned int
+nanddev_eraseblocks_per_target(const struct nand_device *nand)
+{
+ return nand->memorg.eraseblocks_per_lun * nand->memorg.luns_per_target;
}
/**
@@ -317,7 +498,7 @@
}
/**
- * nanddev_neraseblocks() - Get the total number of erasablocks
+ * nanddev_neraseblocks() - Get the total number of eraseblocks
* @nand: NAND device
*
* Return: the total number of eraseblocks exposed by @nand.
@@ -352,6 +533,40 @@
nanddev_get_memorg(struct nand_device *nand)
{
return &nand->memorg;
+}
+
+/**
+ * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_conf(struct nand_device *nand)
+{
+ return &nand->ecc.ctx.conf;
+}
+
+/**
+ * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
+ * device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_requirements(struct nand_device *nand)
+{
+ return &nand->ecc.requirements;
+}
+
+/**
+ * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND
+ * device
+ * @nand: NAND device
+ * @reqs: Requirements
+ */
+static inline void
+nanddev_set_ecc_requirements(struct nand_device *nand,
+ const struct nand_ecc_props *reqs)
+{
+ nand->ecc.requirements = *reqs;
}
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
@@ -595,11 +810,13 @@
* layer.
*/
static inline void nanddev_io_iter_init(struct nand_device *nand,
+ enum nand_page_io_req_type reqtype,
loff_t offs, struct mtd_oob_ops *req,
struct nand_io_iter *iter)
{
struct mtd_info *mtd = nanddev_to_mtd(nand);
+ iter->req.type = reqtype;
iter->req.mode = req->mode;
iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
iter->req.ooboffs = req->ooboffs;
@@ -669,8 +886,8 @@
*
* Should be used for iterate over pages that are contained in an MTD request.
*/
-#define nanddev_io_for_each_page(nand, start, req, iter) \
- for (nanddev_io_iter_init(nand, start, req, iter); \
+#define nanddev_io_for_each_page(nand, type, start, req, iter) \
+ for (nanddev_io_iter_init(nand, type, start, req, iter); \
!nanddev_io_iter_end(nand, iter); \
nanddev_io_iter_next_page(nand, iter))
@@ -729,5 +946,6 @@
/* MTD -> NAND helper functions. */
int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo);
+int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len);
#endif /* __LINUX_MTD_NAND_H */
--
Gitblit v1.6.2