From 9999e48639b3cecb08ffb37358bcba3b48161b29 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:17 +0000
Subject: [PATCH] add ax88772_rst

---
 kernel/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c |   53 +++++++++++++++++++++++++++--------------------------
 1 files changed, 27 insertions(+), 26 deletions(-)

diff --git a/kernel/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/kernel/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index 3256e5c..fd1b0cc 100644
--- a/kernel/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/kernel/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
  *
  * Copyright (C) 2016 Joao Pinto <jpinto@synopsys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/clk.h>
@@ -46,7 +40,7 @@
 static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 				   struct plat_stmmacenet_data *plat_dat)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 	u32 burst_map = 0;
 	u32 bit_index = 0;
 	u32 a_index = 0;
@@ -58,9 +52,10 @@
 			return -ENOMEM;
 	}
 
-	plat_dat->axi->axi_lpi_en = of_property_read_bool(np, "snps,en-lpi");
-	if (of_property_read_u32(np, "snps,write-requests",
-				 &plat_dat->axi->axi_wr_osr_lmt)) {
+	plat_dat->axi->axi_lpi_en = device_property_read_bool(dev,
+							      "snps,en-lpi");
+	if (device_property_read_u32(dev, "snps,write-requests",
+				     &plat_dat->axi->axi_wr_osr_lmt)) {
 		/**
 		 * Since the register has a reset value of 1, if property
 		 * is missing, default to 1.
@@ -74,8 +69,8 @@
 		plat_dat->axi->axi_wr_osr_lmt--;
 	}
 
-	if (of_property_read_u32(np, "snps,read-requests",
-				 &plat_dat->axi->axi_rd_osr_lmt)) {
+	if (device_property_read_u32(dev, "snps,read-requests",
+				     &plat_dat->axi->axi_rd_osr_lmt)) {
 		/**
 		 * Since the register has a reset value of 1, if property
 		 * is missing, default to 1.
@@ -88,7 +83,7 @@
 		 */
 		plat_dat->axi->axi_rd_osr_lmt--;
 	}
-	of_property_read_u32(np, "snps,burst-map", &burst_map);
+	device_property_read_u32(dev, "snps,burst-map", &burst_map);
 
 	/* converts burst-map bitmask to burst array */
 	for (bit_index = 0; bit_index < 7; bit_index++) {
@@ -276,6 +271,7 @@
 			      struct plat_stmmacenet_data *data,
 			      struct stmmac_resources *res)
 {
+	struct device *dev = &pdev->dev;
 	struct tegra_eqos *eqos;
 	int err;
 
@@ -287,6 +283,9 @@
 
 	eqos->dev = &pdev->dev;
 	eqos->regs = res->addr;
+
+	if (!is_of_node(dev->fwnode))
+		goto bypass_clk_reset_gpio;
 
 	eqos->clk_master = devm_clk_get(&pdev->dev, "master_bus");
 	if (IS_ERR(eqos->clk_master)) {
@@ -339,6 +338,9 @@
 	usleep_range(2000, 4000);
 	gpiod_set_value(eqos->reset, 0);
 
+	/* MDIO bus was already reset just above */
+	data->mdio_bus_data->needs_reset = false;
+
 	eqos->rst = devm_reset_control_get(&pdev->dev, "eqos");
 	if (IS_ERR(eqos->rst)) {
 		err = PTR_ERR(eqos->rst);
@@ -357,9 +359,11 @@
 
 	usleep_range(2000, 4000);
 
+bypass_clk_reset_gpio:
 	data->fix_mac_speed = tegra_eqos_fix_speed;
 	data->init = tegra_eqos_init;
 	data->bsp_priv = eqos;
+	data->sph_disable = 1;
 
 	err = tegra_eqos_init(pdev, eqos);
 	if (err < 0)
@@ -421,11 +425,10 @@
 	const struct dwc_eth_dwmac_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
-	struct resource *res;
 	void *priv;
 	int ret;
 
-	data = of_device_get_match_data(&pdev->dev);
+	data = device_get_match_data(&pdev->dev);
 
 	memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
 
@@ -434,17 +437,11 @@
 	 * resource initialization is done in the glue logic.
 	 */
 	stmmac_res.irq = platform_get_irq(pdev, 0);
-	if (stmmac_res.irq < 0) {
-		if (stmmac_res.irq != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"IRQ configuration information not found\n");
-
+	if (stmmac_res.irq < 0)
 		return stmmac_res.irq;
-	}
 	stmmac_res.wol_irq = stmmac_res.irq;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	stmmac_res.addr = devm_ioremap_resource(&pdev->dev, res);
+	stmmac_res.addr = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(stmmac_res.addr))
 		return PTR_ERR(stmmac_res.addr);
 
@@ -455,7 +452,11 @@
 	priv = data->probe(pdev, plat_dat, &stmmac_res);
 	if (IS_ERR(priv)) {
 		ret = PTR_ERR(priv);
-		dev_err(&pdev->dev, "failed to probe subdriver: %d\n", ret);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to probe subdriver: %d\n",
+				ret);
+
 		goto remove_config;
 	}
 
@@ -484,7 +485,7 @@
 	const struct dwc_eth_dwmac_data *data;
 	int err;
 
-	data = of_device_get_match_data(&pdev->dev);
+	data = device_get_match_data(&pdev->dev);
 
 	err = stmmac_dvr_remove(&pdev->dev);
 	if (err < 0)

--
Gitblit v1.6.2