From 9999e48639b3cecb08ffb37358bcba3b48161b29 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:17 +0000
Subject: [PATCH] add ax88772_rst

---
 kernel/arch/powerpc/kernel/dma-swiotlb.c |  103 +--------------------------------------------------
 1 files changed, 2 insertions(+), 101 deletions(-)

diff --git a/kernel/arch/powerpc/kernel/dma-swiotlb.c b/kernel/arch/powerpc/kernel/dma-swiotlb.c
index 88f3963..fc78161 100644
--- a/kernel/arch/powerpc/kernel/dma-swiotlb.c
+++ b/kernel/arch/powerpc/kernel/dma-swiotlb.c
@@ -1,119 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Contains routines needed to support swiotlb for ppc.
  *
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
  * Author: Becky Bruce
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
-
-#include <linux/dma-mapping.h>
 #include <linux/memblock.h>
-#include <linux/pfn.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-
 #include <asm/machdep.h>
 #include <asm/swiotlb.h>
-#include <asm/dma.h>
 
 unsigned int ppc_swiotlb_enable;
 
-static u64 swiotlb_powerpc_get_required(struct device *dev)
-{
-	u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
-
-	end = memblock_end_of_DRAM();
-	if (max_direct_dma_addr && end > max_direct_dma_addr)
-		end = max_direct_dma_addr;
-	end += get_dma_offset(dev);
-
-	mask = 1ULL << (fls64(end) - 1);
-	mask += mask - 1;
-
-	return mask;
-}
-
-/*
- * At the moment, all platforms that use this code only require
- * swiotlb to be used if we're operating on HIGHMEM.  Since
- * we don't ever call anything other than map_sg, unmap_sg,
- * map_page, and unmap_page on highmem, use normal dma_ops
- * for everything else.
- */
-const struct dma_map_ops powerpc_swiotlb_dma_ops = {
-	.alloc = __dma_nommu_alloc_coherent,
-	.free = __dma_nommu_free_coherent,
-	.mmap = dma_nommu_mmap_coherent,
-	.map_sg = swiotlb_map_sg_attrs,
-	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.dma_supported = swiotlb_dma_supported,
-	.map_page = swiotlb_map_page,
-	.unmap_page = swiotlb_unmap_page,
-	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-	.sync_single_for_device = swiotlb_sync_single_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device,
-	.mapping_error = swiotlb_dma_mapping_error,
-	.get_required_mask = swiotlb_powerpc_get_required,
-};
-
-void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
-{
-	struct pci_controller *hose;
-	struct dev_archdata *sd;
-
-	hose = pci_bus_to_host(pdev->bus);
-	sd = &pdev->dev.archdata;
-	sd->max_direct_dma_addr =
-		hose->dma_window_base_cur + hose->dma_window_size;
-}
-
-static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
-				  unsigned long action, void *data)
-{
-	struct device *dev = data;
-	struct dev_archdata *sd;
-
-	/* We are only intereted in device addition */
-	if (action != BUS_NOTIFY_ADD_DEVICE)
-		return 0;
-
-	sd = &dev->archdata;
-	sd->max_direct_dma_addr = 0;
-
-	/* May need to bounce if the device can't address all of DRAM */
-	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
-		set_dma_ops(dev, &powerpc_swiotlb_dma_ops);
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
-	.notifier_call = ppc_swiotlb_bus_notify,
-	.priority = 0,
-};
-
-int __init swiotlb_setup_bus_notifier(void)
-{
-	bus_register_notifier(&platform_bus_type,
-			      &ppc_swiotlb_plat_bus_notifier);
-	return 0;
-}
-
 void __init swiotlb_detect_4g(void)
 {
-	if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
+	if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
 		ppc_swiotlb_enable = 1;
-#ifdef CONFIG_ZONE_DMA32
-		limit_zone_pfn(ZONE_DMA32, (1ULL << 32) >> PAGE_SHIFT);
-#endif
-	}
 }
 
 static int __init check_swiotlb_enabled(void)

--
Gitblit v1.6.2