From 9999e48639b3cecb08ffb37358bcba3b48161b29 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:17 +0000
Subject: [PATCH] add ax88772_rst
---
kernel/arch/arm/boot/dts/omap36xx.dtsi | 102 ++++++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 92 insertions(+), 10 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/omap36xx.dtsi b/kernel/arch/arm/boot/dts/omap36xx.dtsi
index 6fb23ad..05fe5ed 100644
--- a/kernel/arch/arm/boot/dts/omap36xx.dtsi
+++ b/kernel/arch/arm/boot/dts/omap36xx.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Source for OMAP3 SoC
*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -19,16 +19,66 @@
};
cpus {
- /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+ /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
cpu: cpu@0 {
- operating-points = <
- /* kHz uV */
- 300000 1012500
- 600000 1200000
- 800000 1325000
- >;
- clock-latency = <300000>; /* From legacy driver */
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ vbb-supply = <&abb_mpu_iva>;
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ #cooling-cells = <2>;
};
+ };
+
+ /* see Documentation/devicetree/bindings/opp/opp.txt */
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ opp50-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ /*
+ * we currently only select the max voltage from table
+ * Table 4-19 of the DM3730 Data sheet (SPRS685B)
+ * Format is: cpu0-supply: <target min max>
+ * vbb-supply: <target min max>
+ */
+ opp-microvolt = <1012500 1012500 1012500>,
+ <1012500 1012500 1012500>;
+ /*
+ * first value is silicon revision bit mask
+ * second one is "speed binned" bit mask
+ */
+ opp-supported-hw = <0xffffffff 3>;
+ opp-suspend;
+ };
+
+ opp100-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1200000 1200000>,
+ <1200000 1200000 1200000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp130-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1325000 1325000 1325000>,
+ <1325000 1325000 1325000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp1g-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1375000 1375000 1375000>,
+ <1375000 1375000 1375000>;
+ /* only on am/dm37x with speed-binned bit set */
+ opp-supported-hw = <0xffffffff 2>;
+ turbo-mode;
+ };
+ };
+
+ opp_supply_mpu_iva: opp_supply {
+ compatible = "ti,omap-opp-supply";
+ ti,absolute-max-voltage-uv = <1375000>;
};
ocp@68000000 {
@@ -139,11 +189,43 @@
interrupts = <18>;
};
};
+
+ /*
+ * Note that the sysconfig register layout is a subset of the
+ * "ti,sysc-omap4" type register with just sidle and midle bits
+ * available while omap34xx has "ti,sysc-omap2" type sysconfig.
+ */
+ sgx_module: target-module@50000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5000fe00 0x4>,
+ <0x5000fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&sgx_fck>, <&sgx_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x2000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
};
thermal_zones: thermal-zones {
#include "omap3-cpu-thermal.dtsi"
};
+};
+
+&sdma {
+ compatible = "ti,omap3630-sdma", "ti,omap-sdma";
};
/* OMAP3630 needs dss_96m_fck for VENC */
@@ -153,7 +235,7 @@
};
&ssi {
- status = "ok";
+ status = "okay";
clocks = <&ssi_ssr_fck>,
<&ssi_sst_fck>,
--
Gitblit v1.6.2