From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/sound/usb/format.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 100 insertions(+), 17 deletions(-)
diff --git a/kernel/sound/usb/format.c b/kernel/sound/usb/format.c
index 01ba7a9..e8a63ea 100644
--- a/kernel/sound/usb/format.c
+++ b/kernel/sound/usb/format.c
@@ -1,18 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/init.h>
@@ -89,6 +76,8 @@
}
}
+ fp->fmt_bits = sample_width;
+
if ((pcm_formats == 0) &&
(format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) {
/* some devices don't define this correctly... */
@@ -164,6 +153,19 @@
return pcm_formats;
}
+static int set_fixed_rate(struct audioformat *fp, int rate, int rate_bits)
+{
+ kfree(fp->rate_table);
+ fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL);
+ if (!fp->rate_table)
+ return -ENOMEM;
+ fp->nr_rates = 1;
+ fp->rate_min = rate;
+ fp->rate_max = rate;
+ fp->rates = rate_bits;
+ fp->rate_table[0] = rate;
+ return 0;
+}
/*
* parse the format descriptor and stores the possible sample rates
@@ -238,7 +240,45 @@
fp->rate_min = combine_triple(&fmt[offset + 1]);
fp->rate_max = combine_triple(&fmt[offset + 4]);
}
+
+ /* Jabra Evolve 65 headset */
+ if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) {
+ /* only 48kHz for playback while keeping 16kHz for capture */
+ if (fp->nr_rates != 1)
+ return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000);
+ }
+
return 0;
+}
+
+
+/*
+ * Presonus Studio 1810c supports a limited set of sampling
+ * rates per altsetting but reports the full set each time.
+ * If we don't filter out the unsupported rates and attempt
+ * to configure the card, it will hang refusing to do any
+ * further audio I/O until a hard reset is performed.
+ *
+ * The list of supported rates per altsetting (set of available
+ * I/O channels) is described in the owner's manual, section 2.2.
+ */
+static bool s1810c_valid_sample_rate(struct audioformat *fp,
+ unsigned int rate)
+{
+ switch (fp->altsetting) {
+ case 1:
+ /* All ADAT ports available */
+ return rate <= 48000;
+ case 2:
+ /* Half of ADAT ports available */
+ return (rate == 88200 || rate == 96000);
+ case 3:
+ /* Analog I/O only (no S/PDIF nor ADAT) */
+ return rate >= 176400;
+ default:
+ return false;
+ }
+ return false;
}
/*
@@ -323,6 +363,12 @@
}
for (rate = min; rate <= max; rate += res) {
+
+ /* Filter out invalid rates on Presonus Studio 1810c */
+ if (chip->usb_id == USB_ID(0x194f, 0x010c) &&
+ !s1810c_valid_sample_rate(fp, rate))
+ goto skip_rate;
+
/* Filter out invalid rates on Focusrite devices */
if (USB_ID_VENDOR(chip->usb_id) == 0x1235 &&
!focusrite_valid_sample_rate(chip, fp, rate))
@@ -352,6 +398,30 @@
return nr_rates;
}
+/* Line6 Helix series and the Rode Rodecaster Pro don't support the
+ * UAC2_CS_RANGE usb function call. Return a static table of known
+ * clock rates.
+ */
+static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip,
+ struct audioformat *fp)
+{
+ switch (chip->usb_id) {
+ case USB_ID(0x0e41, 0x4241): /* Line6 Helix */
+ case USB_ID(0x0e41, 0x4242): /* Line6 Helix Rack */
+ case USB_ID(0x0e41, 0x4244): /* Line6 Helix LT */
+ case USB_ID(0x0e41, 0x4246): /* Line6 HX-Stomp */
+ case USB_ID(0x0e41, 0x4253): /* Line6 HX-Stomp XL */
+ case USB_ID(0x0e41, 0x4247): /* Line6 Pod Go */
+ case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */
+ case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */
+ case USB_ID(0x0e41, 0x424a): /* Line6 Helix LT >= fw 2.82 */
+ case USB_ID(0x19f7, 0x0011): /* Rode Rodecaster Pro */
+ return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000);
+ }
+
+ return -ENODEV;
+}
+
/*
* parse the format descriptor and stores the possible sample rates
* on the audioformat table (audio class v2 and v3).
@@ -361,7 +431,7 @@
{
struct usb_device *dev = chip->dev;
unsigned char tmp[2], *data;
- int nr_triplets, data_size, ret = 0;
+ int nr_triplets, data_size, ret = 0, ret_l6;
int clock = snd_usb_clock_find_source(chip, fp, false);
if (clock < 0) {
@@ -379,9 +449,22 @@
tmp, sizeof(tmp));
if (ret < 0) {
- dev_err(&dev->dev,
- "%s(): unable to retrieve number of sample rates (clock %d)\n",
+ /* line6 helix devices don't support UAC2_CS_CONTROL_SAM_FREQ call */
+ ret_l6 = line6_parse_audio_format_rates_quirk(chip, fp);
+ if (ret_l6 == -ENODEV) {
+ /* no line6 device found continue showing the error */
+ dev_err(&dev->dev,
+ "%s(): unable to retrieve number of sample rates (clock %d)\n",
__func__, clock);
+ goto err;
+ }
+ if (ret_l6 == 0) {
+ dev_info(&dev->dev,
+ "%s(): unable to retrieve number of sample rates: set it to a predefined value (clock %d).\n",
+ __func__, clock);
+ return 0;
+ }
+ ret = ret_l6;
goto err;
}
--
Gitblit v1.6.2