From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/include/linux/usb/tcpm.h | 63 +++++++++++++++++++++++++------
1 files changed, 50 insertions(+), 13 deletions(-)
diff --git a/kernel/include/linux/usb/tcpm.h b/kernel/include/linux/usb/tcpm.h
index c910188..cb69546 100644
--- a/kernel/include/linux/usb/tcpm.h
+++ b/kernel/include/linux/usb/tcpm.h
@@ -1,15 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2015-2017 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#ifndef __LINUX_USB_TCPM_H
@@ -75,6 +66,8 @@
* For example, some tcpcs may include BC1.2 charger detection
* and use that in this case.
* @set_cc: Called to set value of CC pins
+ * @apply_rc: Optional; Needed to move TCPCI based chipset to APPLY_RC state
+ * as stated by the TCPCI specification.
* @get_cc: Called to read current CC pin values
* @set_polarity:
* Called to set polarity
@@ -91,10 +84,44 @@
* automatically if a connection is established.
* @try_role: Optional; called to set a preferred role
* @pd_transmit:Called to transmit PD message
+ * @set_bist_data: Turn on/off bist data mode for compliance testing
* @enable_frs:
* Optional; Called to enable/disable PD 3.0 fast role swap.
* Enabling frs is accessory dependent as not all PD3.0
* accessories support fast role swap.
+ * @frs_sourcing_vbus:
+ * Optional; Called to notify that vbus is now being sourced.
+ * Low level drivers can perform chip specific operations, if any.
+ * @enable_auto_vbus_discharge:
+ * Optional; TCPCI spec based TCPC implementations can optionally
+ * support hardware to autonomously dischrge vbus upon disconnecting
+ * as sink or source. TCPM signals TCPC to enable the mechanism upon
+ * entering connected state and signals disabling upon disconnect.
+ * @set_auto_vbus_discharge_threshold:
+ * Mandatory when enable_auto_vbus_discharge is implemented. TCPM
+ * calls this function to allow lower levels drivers to program the
+ * vbus threshold voltage below which the vbus discharge circuit
+ * will be turned on. requested_vbus_voltage is set to 0 when vbus
+ * is going to disappear knowingly i.e. during PR_SWAP and
+ * HARD_RESET etc.
+ * @is_vbus_vsafe0v:
+ * Optional; TCPCI spec based TCPC implementations are expected to
+ * detect VSAFE0V voltage level at vbus. When detection of VSAFE0V
+ * is supported by TCPC, set this callback for TCPM to query
+ * whether vbus is at VSAFE0V when needed.
+ * Returns true when vbus is at VSAFE0V, false otherwise.
+ * @set_partner_usb_comm_capable:
+ * Optional; The USB Communications Capable bit indicates if port
+ * partner is capable of communication over the USB data lines
+ * (e.g. D+/- or SS Tx/Rx). Called to notify the status of the bit.
+ * @check_contaminant:
+ * Optional; The callback is called when CC pins report open status
+ * at the end of the toggling period. Chip level drivers are
+ * expected to check for contaminant and re-enable toggling if
+ * needed. When 0 is not returned, check_contaminant is expected to
+ * restart toggling after checking the connector for contaminant.
+ * This forces the TCPM state machine to tranistion to TOGGLING state
+ * without calling start_toggling callback.
*/
struct tcpc_dev {
struct fwnode_handle *fwnode;
@@ -103,6 +130,8 @@
int (*get_vbus)(struct tcpc_dev *dev);
int (*get_current_limit)(struct tcpc_dev *dev);
int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
+ int (*apply_rc)(struct tcpc_dev *dev, enum typec_cc_status cc,
+ enum typec_cc_polarity polarity);
int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
enum typec_cc_status *cc2);
int (*set_polarity)(struct tcpc_dev *dev,
@@ -118,8 +147,16 @@
enum typec_cc_status cc);
int (*try_role)(struct tcpc_dev *dev, int role);
int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
- const struct pd_message *msg);
+ const struct pd_message *msg, unsigned int negotiated_rev);
+ int (*set_bist_data)(struct tcpc_dev *dev, bool on);
int (*enable_frs)(struct tcpc_dev *dev, bool enable);
+ void (*frs_sourcing_vbus)(struct tcpc_dev *dev);
+ int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable);
+ int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode,
+ bool pps_active, u32 requested_vbus_voltage);
+ int (*check_contaminant)(struct tcpc_dev *dev);
+ bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev);
+ void (*set_partner_usb_comm_capable)(struct tcpc_dev *dev, bool enable);
};
struct tcpm_port;
@@ -127,8 +164,6 @@
struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc);
void tcpm_unregister_port(struct tcpm_port *port);
-int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
- unsigned int nr_pdo);
int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo,
unsigned int nr_pdo,
unsigned int operating_snk_mw);
@@ -143,5 +178,7 @@
enum tcpm_transmit_status status);
void tcpm_pd_hard_reset(struct tcpm_port *port);
void tcpm_tcpc_reset(struct tcpm_port *port);
+bool tcpm_is_debouncing(struct tcpm_port *tcpm);
+bool tcpm_is_toggling(struct tcpm_port *port);
#endif /* __LINUX_USB_TCPM_H */
--
Gitblit v1.6.2