From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/drivers/scsi/lpfc/lpfc_mbox.c | 66 +++++++++++++++++----------------
1 files changed, 34 insertions(+), 32 deletions(-)
diff --git a/kernel/drivers/scsi/lpfc/lpfc_mbox.c b/kernel/drivers/scsi/lpfc/lpfc_mbox.c
index a4c382d..8764fdf 100644
--- a/kernel/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/kernel/drivers/scsi/lpfc/lpfc_mbox.c
@@ -94,7 +94,7 @@
memset(mp->virt, 0, LPFC_BPL_SIZE);
INIT_LIST_HEAD(&mp->list);
/* save address for completion */
- pmb->context1 = (uint8_t *)mp;
+ pmb->ctx_buf = (uint8_t *)mp;
mb->un.varWords[3] = putPaddrLow(mp->phys);
mb->un.varWords[4] = putPaddrHigh(mp->phys);
mb->un.varDmp.sli4_length = sizeof(struct static_vport_info);
@@ -139,7 +139,7 @@
void *ctx;
mb = &pmb->u.mb;
- ctx = pmb->context2;
+ ctx = pmb->ctx_buf;
/* Setup to dump VPD region */
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
@@ -151,7 +151,7 @@
mb->un.varDmp.word_cnt = (DMP_RSP_SIZE / sizeof (uint32_t));
mb->un.varDmp.co = 0;
mb->un.varDmp.resp_offset = 0;
- pmb->context2 = ctx;
+ pmb->ctx_buf = ctx;
mb->mbxOwner = OWN_HOST;
return;
}
@@ -172,7 +172,7 @@
mb = &pmb->u.mb;
/* Save context so that we can restore after memset */
- ctx = pmb->context2;
+ ctx = pmb->ctx_buf;
/* Setup to dump VPD region */
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
@@ -186,7 +186,7 @@
mb->un.varDmp.word_cnt = WAKE_UP_PARMS_WORD_SIZE;
mb->un.varDmp.co = 0;
mb->un.varDmp.resp_offset = 0;
- pmb->context2 = ctx;
+ pmb->ctx_buf = ctx;
return;
}
@@ -304,7 +304,7 @@
/* Save address for later completion and set the owner to host so that
* the FW knows this mailbox is available for processing.
*/
- pmb->context1 = (uint8_t *)mp;
+ pmb->ctx_buf = (uint8_t *)mp;
mb->mbxOwner = OWN_HOST;
return (0);
}
@@ -515,6 +515,7 @@
if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
+ !(phba->sli4_hba.pc_sli4_params.pls) &&
mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT;
@@ -631,7 +632,7 @@
mb->un.varRdSparm.vpi = phba->vpi_ids[vpi];
/* save address for completion */
- pmb->context1 = mp;
+ pmb->ctx_buf = mp;
return (0);
}
@@ -783,7 +784,7 @@
memcpy(sparam, param, sizeof (struct serv_parm));
/* save address for completion */
- pmb->context1 = (uint8_t *) mp;
+ pmb->ctx_buf = (uint8_t *)mp;
mb->mbxCommand = MBX_REG_LOGIN64;
mb->un.varRegLogin.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
@@ -858,7 +859,7 @@
mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000;
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->context1 = NULL;
+ mbox->ctx_ndlp = NULL;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED)
mempool_free(mbox, phba->mbox_mem_pool);
@@ -867,9 +868,7 @@
/**
* lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
- * @phba: pointer to lpfc hba data structure.
- * @vpi: virtual N_Port identifier.
- * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
+ * @vport: pointer to a vport object.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
* The registration vport identifier mailbox command is used to activate a
@@ -1198,7 +1197,7 @@
/**
* lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
* @phba: pointer to lpfc hba data structure.
- * @ring:
+ * @ring: ring number/index
* @pmb: pointer to the driver internal queue element for mailbox command.
*
* The configure ring mailbox command is used to configure an IOCB ring. This
@@ -1298,8 +1297,6 @@
if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
if (phba->cfg_enable_bg)
mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
- if (phba->cfg_enable_dss)
- mb->un.varCfgPort.cdss = 1; /* Configure Security */
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
@@ -1379,7 +1376,8 @@
*/
if (phba->cfg_hostmem_hgp && phba->sli_rev != 3) {
- phba->host_gp = &phba->mbox->us.s2.host[0];
+ phba->host_gp = (struct lpfc_hgp __iomem *)
+ &phba->mbox->us.s2.host[0];
phba->hbq_put = NULL;
offset = (uint8_t *)&phba->mbox->us.s2.host -
(uint8_t *)phba->slim2p.virt;
@@ -1613,7 +1611,7 @@
/**
* lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
- * @cmd: mailbox command code.
+ * @mboxq: pointer to the driver internal queue element for mailbox command.
*
* This routine retrieves the proper timeout value according to the mailbox
* command code.
@@ -1700,6 +1698,7 @@
* lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
* @mbox: pointer to lpfc mbox command.
* @sgentry: sge entry index.
+ * @sge: pointer to lpfc mailbox sge to load into.
*
* This routine gets an entry from the non-embedded mailbox command at the sge
* index location.
@@ -1767,6 +1766,7 @@
* @subsystem: The sli4 config sub mailbox subsystem.
* @opcode: The sli4 config sub mailbox command opcode.
* @length: Length of the sli4 config mailbox command (including sub-header).
+ * @emb: True if embedded mbox command should be setup.
*
* This routine sets up the header fields of SLI4 specific mailbox command
* for sending IOCTL command.
@@ -1827,9 +1827,9 @@
* page, this is used as a priori size of SLI4_PAGE_SIZE for
* the later DMA memory free.
*/
- viraddr = dma_zalloc_coherent(&phba->pcidev->dev,
- SLI4_PAGE_SIZE, &phyaddr,
- GFP_KERNEL);
+ viraddr = dma_alloc_coherent(&phba->pcidev->dev,
+ SLI4_PAGE_SIZE, &phyaddr,
+ GFP_KERNEL);
/* In case of malloc fails, proceed with whatever we have */
if (!viraddr)
break;
@@ -2012,6 +2012,7 @@
/**
* lpfc_sli4_mbx_read_fcf_rec - Allocate and construct read fcf mbox cmd
* @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to lpfc mbox command.
* @fcf_index: index to fcf table.
*
* This routine routine allocates and constructs non-embedded mailbox command
@@ -2068,6 +2069,7 @@
/**
* lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
+ * @phba: pointer to lpfc hba data structure.
* @mboxq: pointer to lpfc mbox command.
*
* This routine sets up the mailbox for an SLI4 REQUEST_FEATURES
@@ -2095,8 +2097,8 @@
if (phba->nvmet_support) {
bf_set(lpfc_mbx_rq_ftr_rq_mrqp, &mboxq->u.mqe.un.req_ftrs, 1);
/* iaab/iaar NOT set for now */
- bf_set(lpfc_mbx_rq_ftr_rq_iaab, &mboxq->u.mqe.un.req_ftrs, 0);
- bf_set(lpfc_mbx_rq_ftr_rq_iaar, &mboxq->u.mqe.un.req_ftrs, 0);
+ bf_set(lpfc_mbx_rq_ftr_rq_iaab, &mboxq->u.mqe.un.req_ftrs, 0);
+ bf_set(lpfc_mbx_rq_ftr_rq_iaar, &mboxq->u.mqe.un.req_ftrs, 0);
}
return;
}
@@ -2288,7 +2290,7 @@
INIT_LIST_HEAD(&mp->list);
/* save address for completion */
- mbox->context1 = (uint8_t *) mp;
+ mbox->ctx_buf = (uint8_t *)mp;
mb->mbxCommand = MBX_DUMP_MEMORY;
mb->un.varDmp.type = DMP_NV_PARAMS;
@@ -2305,7 +2307,7 @@
MAILBOX_t *mb;
int rc = FAILURE;
struct lpfc_rdp_context *rdp_context =
- (struct lpfc_rdp_context *)(mboxq->context2);
+ (struct lpfc_rdp_context *)(mboxq->ctx_ndlp);
mb = &mboxq->u.mb;
if (mb->mbxStatus)
@@ -2323,9 +2325,9 @@
static void
lpfc_mbx_cmpl_rdp_page_a2(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
- struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) mbox->context1;
+ struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)mbox->ctx_buf;
struct lpfc_rdp_context *rdp_context =
- (struct lpfc_rdp_context *)(mbox->context2);
+ (struct lpfc_rdp_context *)(mbox->ctx_ndlp);
if (bf_get(lpfc_mqe_status, &mbox->u.mqe))
goto error_mbuf_free;
@@ -2341,7 +2343,7 @@
lpfc_read_lnk_stat(phba, mbox);
mbox->vport = rdp_context->ndlp->vport;
mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_link_stat;
- mbox->context2 = (struct lpfc_rdp_context *) rdp_context;
+ mbox->ctx_ndlp = (struct lpfc_rdp_context *)rdp_context;
if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) == MBX_NOT_FINISHED)
goto error_cmd_free;
@@ -2359,9 +2361,9 @@
lpfc_mbx_cmpl_rdp_page_a0(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
int rc;
- struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (mbox->context1);
+ struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)(mbox->ctx_buf);
struct lpfc_rdp_context *rdp_context =
- (struct lpfc_rdp_context *)(mbox->context2);
+ (struct lpfc_rdp_context *)(mbox->ctx_ndlp);
if (bf_get(lpfc_mqe_status, &mbox->u.mqe))
goto error;
@@ -2375,7 +2377,7 @@
INIT_LIST_HEAD(&mp->list);
/* save address for completion */
- mbox->context1 = mp;
+ mbox->ctx_buf = mp;
mbox->vport = rdp_context->ndlp->vport;
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_DUMP_MEMORY);
@@ -2391,7 +2393,7 @@
mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys);
mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_page_a2;
- mbox->context2 = (struct lpfc_rdp_context *) rdp_context;
+ mbox->ctx_ndlp = (struct lpfc_rdp_context *)rdp_context;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED)
goto error;
@@ -2436,7 +2438,7 @@
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_DUMP_MEMORY);
/* save address for completion */
- mbox->context1 = mp;
+ mbox->ctx_buf = mp;
bf_set(lpfc_mbx_memory_dump_type3_type,
&mbox->u.mqe.un.mem_dump_type3, DMP_LMSD);
--
Gitblit v1.6.2