From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/drivers/regulator/wm8994-regulator.c | 94 +++++++++++++++++++++++++++++++++-------------
1 files changed, 67 insertions(+), 27 deletions(-)
diff --git a/kernel/drivers/regulator/wm8994-regulator.c b/kernel/drivers/regulator/wm8994-regulator.c
index 7a4ce6d..40befdd 100644
--- a/kernel/drivers/regulator/wm8994-regulator.c
+++ b/kernel/drivers/regulator/wm8994-regulator.c
@@ -1,15 +1,10 @@
-/*
- * wm8994-regulator.c -- Regulator driver for the WM8994
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// wm8994-regulator.c -- Regulator driver for the WM8994
+//
+// Copyright 2009 Wolfson Microelectronics PLC.
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -19,7 +14,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/mfd/wm8994/core.h>
@@ -87,6 +82,35 @@
.min_uV = 2400000,
.uV_step = 100000,
.enable_time = 3000,
+ .off_on_delay = 36000,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO2",
+ .id = 2,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
+ .vsel_reg = WM8994_LDO_2,
+ .vsel_mask = WM8994_LDO2_VSEL_MASK,
+ .ops = &wm8994_ldo2_ops,
+ .enable_time = 3000,
+ .off_on_delay = 36000,
+ .owner = THIS_MODULE,
+ },
+};
+
+static const struct regulator_desc wm8958_ldo_desc[] = {
+ {
+ .name = "LDO1",
+ .id = 1,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
+ .vsel_reg = WM8994_LDO_1,
+ .vsel_mask = WM8994_LDO1_VSEL_MASK,
+ .ops = &wm8994_ldo1_ops,
+ .min_uV = 2400000,
+ .uV_step = 100000,
+ .enable_time = 3000,
.owner = THIS_MODULE,
},
{
@@ -129,6 +153,7 @@
int id = pdev->id % ARRAY_SIZE(pdata->ldo);
struct regulator_config config = { };
struct wm8994_ldo *ldo;
+ struct gpio_desc *gpiod;
int ret;
dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
@@ -145,12 +170,18 @@
config.driver_data = ldo;
config.regmap = wm8994->regmap;
config.init_data = &ldo->init_data;
- if (pdata) {
- config.ena_gpio = pdata->ldo[id].enable;
- } else if (wm8994->dev->of_node) {
- config.ena_gpio = wm8994->pdata.ldo[id].enable;
- config.ena_gpio_initialized = true;
- }
+
+ /*
+ * Look up LDO enable GPIO from the parent device node, we don't
+ * use devm because the regulator core will free the GPIO
+ */
+ gpiod = gpiod_get_optional(pdev->dev.parent,
+ id ? "wlf,ldo2ena" : "wlf,ldo1ena",
+ GPIOD_OUT_LOW |
+ GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+ config.ena_gpiod = gpiod;
/* Use default constraints if none set up */
if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
@@ -159,28 +190,37 @@
ldo->init_data = wm8994_ldo_default[id];
ldo->init_data.consumer_supplies = &ldo->supply;
- if (!config.ena_gpio)
+ if (!gpiod)
ldo->init_data.constraints.valid_ops_mask = 0;
} else {
ldo->init_data = *pdata->ldo[id].init_data;
}
- ldo->regulator = devm_regulator_register(&pdev->dev,
- &wm8994_ldo_desc[id],
- &config);
+ /*
+ * At this point the GPIO descriptor is handled over to the
+ * regulator core and we need not worry about it on the
+ * error path.
+ */
+ if (ldo->wm8994->type == WM8994) {
+ ldo->regulator = devm_regulator_register(&pdev->dev,
+ &wm8994_ldo_desc[id],
+ &config);
+ } else {
+ ldo->regulator = devm_regulator_register(&pdev->dev,
+ &wm8958_ldo_desc[id],
+ &config);
+ }
+
if (IS_ERR(ldo->regulator)) {
ret = PTR_ERR(ldo->regulator);
dev_err(wm8994->dev, "Failed to register LDO%d: %d\n",
id + 1, ret);
- goto err;
+ return ret;
}
platform_set_drvdata(pdev, ldo);
return 0;
-
-err:
- return ret;
}
static struct platform_driver wm8994_ldo_driver = {
--
Gitblit v1.6.2