From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/drivers/regulator/s2mps11.c | 320 +++++++++++++++++++++++++++++-----------------------
1 files changed, 178 insertions(+), 142 deletions(-)
diff --git a/kernel/drivers/regulator/s2mps11.c b/kernel/drivers/regulator/s2mps11.c
index 7c598c1..33cf84b 100644
--- a/kernel/drivers/regulator/s2mps11.c
+++ b/kernel/drivers/regulator/s2mps11.c
@@ -5,7 +5,7 @@
#include <linux/bug.h>
#include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -14,7 +14,6 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
-#include <linux/of_gpio.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
@@ -35,7 +34,7 @@
enum sec_device_type dev_type;
/*
- * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
+ * One bit for each S2MPS11/S2MPS13/S2MPS14/S2MPU02 regulator whether
* the suspend mode was enabled.
*/
DECLARE_BITMAP(suspend_state, S2MPS_REGULATOR_MAX);
@@ -44,7 +43,7 @@
* Array (size: number of regulators) with GPIO-s for external
* sleep control.
*/
- int *ext_control_gpio;
+ struct gpio_desc **ext_control_gpiod;
};
static int get_ramp_delay(int ramp_delay)
@@ -71,10 +70,11 @@
unsigned int new_selector)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
+ int rdev_id = rdev_get_id(rdev);
unsigned int ramp_delay = 0;
int old_volt, new_volt;
- switch (rdev_get_id(rdev)) {
+ switch (rdev_id) {
case S2MPS11_BUCK2:
ramp_delay = s2mps11->ramp_delay2;
break;
@@ -112,9 +112,10 @@
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPS11_REG_RAMP_BUCK;
unsigned int ramp_enable = 1, enable_shift = 0;
+ int rdev_id = rdev_get_id(rdev);
int ret;
- switch (rdev_get_id(rdev)) {
+ switch (rdev_id) {
case S2MPS11_BUCK1:
if (ramp_delay > s2mps11->ramp_delay16)
s2mps11->ramp_delay16 = ramp_delay;
@@ -204,9 +205,8 @@
goto ramp_disable;
/* Ramp delay can be enabled/disabled only for buck[2346] */
- if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 &&
- rdev_get_id(rdev) <= S2MPS11_BUCK4) ||
- rdev_get_id(rdev) == S2MPS11_BUCK6) {
+ if ((rdev_id >= S2MPS11_BUCK2 && rdev_id <= S2MPS11_BUCK4) ||
+ rdev_id == S2MPS11_BUCK6) {
ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
1 << enable_shift, 1 << enable_shift);
if (ret) {
@@ -225,27 +225,133 @@
1 << enable_shift, 0);
}
+static int s2mps11_regulator_enable(struct regulator_dev *rdev)
+{
+ struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
+ int rdev_id = rdev_get_id(rdev);
+ unsigned int val;
+
+ switch (s2mps11->dev_type) {
+ case S2MPS11X:
+ if (test_bit(rdev_id, s2mps11->suspend_state))
+ val = S2MPS14_ENABLE_SUSPEND;
+ else
+ val = rdev->desc->enable_mask;
+ break;
+ case S2MPS13X:
+ case S2MPS14X:
+ if (test_bit(rdev_id, s2mps11->suspend_state))
+ val = S2MPS14_ENABLE_SUSPEND;
+ else if (s2mps11->ext_control_gpiod[rdev_id])
+ val = S2MPS14_ENABLE_EXT_CONTROL;
+ else
+ val = rdev->desc->enable_mask;
+ break;
+ case S2MPU02:
+ if (test_bit(rdev_id, s2mps11->suspend_state))
+ val = S2MPU02_ENABLE_SUSPEND;
+ else
+ val = rdev->desc->enable_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val);
+}
+
+static int s2mps11_regulator_set_suspend_disable(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int val, state;
+ struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
+ int rdev_id = rdev_get_id(rdev);
+
+ /* Below LDO should be always on or does not support suspend mode. */
+ switch (s2mps11->dev_type) {
+ case S2MPS11X:
+ switch (rdev_id) {
+ case S2MPS11_LDO2:
+ case S2MPS11_LDO36:
+ case S2MPS11_LDO37:
+ case S2MPS11_LDO38:
+ return 0;
+ default:
+ state = S2MPS14_ENABLE_SUSPEND;
+ break;
+ }
+ break;
+ case S2MPS13X:
+ case S2MPS14X:
+ switch (rdev_id) {
+ case S2MPS14_LDO3:
+ return 0;
+ default:
+ state = S2MPS14_ENABLE_SUSPEND;
+ break;
+ }
+ break;
+ case S2MPU02:
+ switch (rdev_id) {
+ case S2MPU02_LDO13:
+ case S2MPU02_LDO14:
+ case S2MPU02_LDO15:
+ case S2MPU02_LDO17:
+ case S2MPU02_BUCK7:
+ state = S2MPU02_DISABLE_SUSPEND;
+ break;
+ default:
+ state = S2MPU02_ENABLE_SUSPEND;
+ break;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ set_bit(rdev_id, s2mps11->suspend_state);
+ /*
+ * Don't enable suspend mode if regulator is already disabled because
+ * this would effectively for a short time turn on the regulator after
+ * resuming.
+ * However we still want to toggle the suspend_state bit for regulator
+ * in case if it got enabled before suspending the system.
+ */
+ if (!(val & rdev->desc->enable_mask))
+ return 0;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, state);
+}
+
static const struct regulator_ops s2mps11_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
- .enable = regulator_enable_regmap,
+ .enable = s2mps11_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_disable = s2mps11_regulator_set_suspend_disable,
};
static const struct regulator_ops s2mps11_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
- .enable = regulator_enable_regmap,
+ .enable = s2mps11_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = s2mps11_regulator_set_voltage_time_sel,
.set_ramp_delay = s2mps11_set_ramp_delay,
+ .set_suspend_disable = s2mps11_regulator_set_suspend_disable,
};
#define regulator_desc_s2mps11_ldo(num, step) { \
@@ -270,9 +376,10 @@
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = MIN_600_MV, \
+ .min_uV = MIN_650_MV, \
.uV_step = STEP_6_25_MV, \
- .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .linear_min_sel = 8, \
+ .n_voltages = S2MPS11_BUCK12346_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
@@ -286,9 +393,10 @@
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = MIN_600_MV, \
+ .min_uV = MIN_650_MV, \
.uV_step = STEP_6_25_MV, \
- .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .linear_min_sel = 8, \
+ .n_voltages = S2MPS11_BUCK5_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B5CTRL2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
@@ -296,7 +404,7 @@
.enable_mask = S2MPS11_ENABLE_MASK \
}
-#define regulator_desc_s2mps11_buck67810(num, min, step) { \
+#define regulator_desc_s2mps11_buck67810(num, min, step, min_sel, voltages) { \
.name = "BUCK"#num, \
.id = S2MPS11_BUCK##num, \
.ops = &s2mps11_buck_ops, \
@@ -304,7 +412,8 @@
.owner = THIS_MODULE, \
.min_uV = min, \
.uV_step = step, \
- .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = voltages, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
@@ -372,11 +481,15 @@
regulator_desc_s2mps11_buck1_4(3),
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
- regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV),
- regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(6, MIN_650_MV, STEP_6_25_MV, 8,
+ S2MPS11_BUCK12346_N_VOLTAGES),
+ regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV, 0,
+ S2MPS11_BUCK7810_N_VOLTAGES),
+ regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV, 0,
+ S2MPS11_BUCK7810_N_VOLTAGES),
regulator_desc_s2mps11_buck9,
- regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV, 0,
+ S2MPS11_BUCK7810_N_VOLTAGES),
};
static const struct regulator_ops s2mps14_reg_ops;
@@ -501,101 +614,16 @@
regulator_desc_s2mps13_buck8_10(10, MIN_500_MV, STEP_6_25_MV, 0x10),
};
-static int s2mps14_regulator_enable(struct regulator_dev *rdev)
-{
- struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
- unsigned int val;
-
- switch (s2mps11->dev_type) {
- case S2MPS13X:
- case S2MPS14X:
- if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
- val = S2MPS14_ENABLE_SUSPEND;
- else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
- val = S2MPS14_ENABLE_EXT_CONTROL;
- else
- val = rdev->desc->enable_mask;
- break;
- case S2MPU02:
- if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
- val = S2MPU02_ENABLE_SUSPEND;
- else
- val = rdev->desc->enable_mask;
- break;
- default:
- return -EINVAL;
- }
-
- return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
-}
-
-static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
-{
- int ret;
- unsigned int val, state;
- struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
- int rdev_id = rdev_get_id(rdev);
-
- /* Below LDO should be always on or does not support suspend mode. */
- switch (s2mps11->dev_type) {
- case S2MPS13X:
- case S2MPS14X:
- switch (rdev_id) {
- case S2MPS14_LDO3:
- return 0;
- default:
- state = S2MPS14_ENABLE_SUSPEND;
- break;
- }
- break;
- case S2MPU02:
- switch (rdev_id) {
- case S2MPU02_LDO13:
- case S2MPU02_LDO14:
- case S2MPU02_LDO15:
- case S2MPU02_LDO17:
- case S2MPU02_BUCK7:
- state = S2MPU02_DISABLE_SUSPEND;
- break;
- default:
- state = S2MPU02_ENABLE_SUSPEND;
- break;
- }
- break;
- default:
- return -EINVAL;
- }
-
- ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
- if (ret < 0)
- return ret;
-
- set_bit(rdev_get_id(rdev), s2mps11->suspend_state);
- /*
- * Don't enable suspend mode if regulator is already disabled because
- * this would effectively for a short time turn on the regulator after
- * resuming.
- * However we still want to toggle the suspend_state bit for regulator
- * in case if it got enabled before suspending the system.
- */
- if (!(val & rdev->desc->enable_mask))
- return 0;
-
- return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, state);
-}
-
static const struct regulator_ops s2mps14_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
- .enable = s2mps14_regulator_enable,
+ .enable = s2mps11_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_disable = s2mps14_regulator_set_suspend_disable,
+ .set_suspend_disable = s2mps11_regulator_set_suspend_disable,
};
#define regulator_desc_s2mps14_ldo(num, min, step) { \
@@ -721,37 +749,37 @@
}
/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges1[] = {
REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
};
/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges2[] = {
REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
};
/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges3[] = {
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
};
/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges4[] = {
REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
};
/* voltage range for s2mps15 LDO 1 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges5[] = {
REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
};
/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
-static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+static const struct linear_range s2mps15_buck_voltage_ranges1[] = {
REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
};
/* voltage range for s2mps15 BUCK 8, 9 and 10 */
-static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+static const struct linear_range s2mps15_buck_voltage_ranges2[] = {
REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
};
@@ -805,7 +833,7 @@
static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
{
- int *gpio = s2mps11->ext_control_gpio;
+ struct gpio_desc **gpio = s2mps11->ext_control_gpiod;
unsigned int i;
unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
S2MPS14_LDO12 };
@@ -816,11 +844,22 @@
if (!rdata[reg].init_data || !rdata[reg].of_node)
continue;
- gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
- "samsung,ext-control-gpios", 0);
- if (gpio_is_valid(gpio[reg]))
- dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
- gpio[reg], reg, rdata[reg].name);
+ gpio[reg] = devm_fwnode_gpiod_get(&pdev->dev,
+ of_fwnode_handle(rdata[reg].of_node),
+ "samsung,ext-control",
+ GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+ "s2mps11-regulator");
+ if (PTR_ERR(gpio[reg]) == -ENOENT)
+ gpio[reg] = NULL;
+ else if (IS_ERR(gpio[reg])) {
+ dev_err(&pdev->dev, "Failed to get control GPIO for %d/%s\n",
+ reg, rdata[reg].name);
+ gpio[reg] = NULL;
+ continue;
+ }
+ if (gpio[reg])
+ dev_dbg(&pdev->dev, "Using GPIO for ext-control over %d/%s\n",
+ reg, rdata[reg].name);
}
}
@@ -848,8 +887,9 @@
static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_val, ramp_shift, ramp_reg;
+ int rdev_id = rdev_get_id(rdev);
- switch (rdev_get_id(rdev)) {
+ switch (rdev_id) {
case S2MPU02_BUCK1:
ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
break;
@@ -877,24 +917,24 @@
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
- .enable = s2mps14_regulator_enable,
+ .enable = s2mps11_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_disable = s2mps14_regulator_set_suspend_disable,
+ .set_suspend_disable = s2mps11_regulator_set_suspend_disable,
};
static const struct regulator_ops s2mpu02_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
- .enable = s2mps14_regulator_enable,
+ .enable = s2mps11_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_disable = s2mps14_regulator_set_suspend_disable,
+ .set_suspend_disable = s2mps11_regulator_set_suspend_disable,
.set_ramp_delay = s2mpu02_set_ramp_delay,
};
@@ -1126,17 +1166,10 @@
return -EINVAL;
}
- s2mps11->ext_control_gpio = devm_kmalloc_array(&pdev->dev,
- rdev_num, sizeof(*s2mps11->ext_control_gpio),
- GFP_KERNEL);
- if (!s2mps11->ext_control_gpio)
+ s2mps11->ext_control_gpiod = devm_kcalloc(&pdev->dev, rdev_num,
+ sizeof(*s2mps11->ext_control_gpiod), GFP_KERNEL);
+ if (!s2mps11->ext_control_gpiod)
return -ENOMEM;
- /*
- * 0 is a valid GPIO so initialize all GPIO-s to negative value
- * to indicate that external control won't be used for this regulator.
- */
- for (i = 0; i < rdev_num; i++)
- s2mps11->ext_control_gpio[i] = -EINVAL;
if (!iodev->dev->of_node) {
if (iodev->pdata) {
@@ -1166,8 +1199,6 @@
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
- config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
- config.ena_gpio_initialized = true;
for (i = 0; i < rdev_num; i++) {
struct regulator_dev *regulator;
@@ -1178,8 +1209,13 @@
config.init_data = rdata[i].init_data;
config.of_node = rdata[i].of_node;
}
- config.ena_gpio = s2mps11->ext_control_gpio[i];
-
+ config.ena_gpiod = s2mps11->ext_control_gpiod[i];
+ /*
+ * Hand the GPIO descriptor management over to the regulator
+ * core, remove it from devres management.
+ */
+ if (config.ena_gpiod)
+ devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
regulator = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
if (IS_ERR(regulator)) {
@@ -1189,7 +1225,7 @@
goto out;
}
- if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
+ if (config.ena_gpiod) {
ret = s2mps14_pmic_enable_ext_control(s2mps11,
regulator);
if (ret < 0) {
@@ -1229,5 +1265,5 @@
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
+MODULE_DESCRIPTION("Samsung S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
MODULE_LICENSE("GPL");
--
Gitblit v1.6.2