From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Sat, 09 Dec 2023 08:38:01 +0000 Subject: [PATCH] enable docker ppp --- kernel/drivers/mfd/si476x-cmd.c | 85 ++++++++++++++++++------------------------ 1 files changed, 37 insertions(+), 48 deletions(-) diff --git a/kernel/drivers/mfd/si476x-cmd.c b/kernel/drivers/mfd/si476x-cmd.c index 2086b46..d15b3e7 100644 --- a/kernel/drivers/mfd/si476x-cmd.c +++ b/kernel/drivers/mfd/si476x-cmd.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * drivers/mfd/si476x-cmd.c -- Subroutines implementing command * protocol of si476x series of chips @@ -6,16 +7,6 @@ * Copyright (C) 2013 Andrey Smirnov * * Author: Andrey Smirnov <andrew.smirnov@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * */ #include <linux/module.h> @@ -250,13 +241,13 @@ /** * si476x_core_send_command() - sends a command to si476x and waits its * response - * @core: si476x_device structure for the device we are + * @core: si476x_device structure for the device we are * communicating with * @command: command id * @args: command arguments we are sending * @argn: actual size of @args - * @response: buffer to place the expected response from the device - * @respn: actual size of @response + * @resp: buffer to place the expected response from the device + * @respn: actual size of @resp * @usecs: amount of time to wait before reading the response (in * usecs) * @@ -505,7 +496,7 @@ * enable 1MOhm pulldown * SI476X_DFS_DAUDIO - set the pin to be a part of digital * audio interface - * @dout - DOUT pin function configuration: + * @dout: - DOUT pin function configuration: * SI476X_DOUT_NOOP - do not modify the behaviour * SI476X_DOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -513,7 +504,7 @@ * port 1 * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S * port 1 - * @xout - XOUT pin function configuration: + * @xout: - XOUT pin function configuration: * SI476X_XOUT_NOOP - do not modify the behaviour * SI476X_XOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -549,25 +540,25 @@ /** * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND' - * @core - device to send the command to - * @iqclk - IQCL pin function configuration: + * @core: - device to send the command to + * @iqclk: - IQCL pin function configuration: * SI476X_IQCLK_NOOP - do not modify the behaviour * SI476X_IQCLK_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace * in master mode - * @iqfs - IQFS pin function configuration: + * @iqfs: - IQFS pin function configuration: * SI476X_IQFS_NOOP - do not modify the behaviour * SI476X_IQFS_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IQFS_IQ - set pin to be a part of I/Q interace * in master mode - * @iout - IOUT pin function configuration: + * @iout: - IOUT pin function configuration: * SI476X_IOUT_NOOP - do not modify the behaviour * SI476X_IOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IOUT_OUTPUT - set pin to be I out - * @qout - QOUT pin function configuration: + * @qout: - QOUT pin function configuration: * SI476X_QOUT_NOOP - do not modify the behaviour * SI476X_QOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -599,29 +590,29 @@ /** * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device - * @core - device to send the command to - * @icin - ICIN pin function configuration: + * @core: - device to send the command to + * @icin: - ICIN pin function configuration: * SI476X_ICIN_NOOP - do not modify the behaviour * SI476X_ICIN_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link - * @icip - ICIP pin function configuration: + * @icip: - ICIP pin function configuration: * SI476X_ICIP_NOOP - do not modify the behaviour * SI476X_ICIP_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link - * @icon - ICON pin function configuration: + * @icon: - ICON pin function configuration: * SI476X_ICON_NOOP - do not modify the behaviour * SI476X_ICON_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICON_I2S - set the pin to be a part of audio * interface in slave mode (DCLK) * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link - * @icop - ICOP pin function configuration: + * @icop: - ICOP pin function configuration: * SI476X_ICOP_NOOP - do not modify the behaviour * SI476X_ICOP_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -656,8 +647,8 @@ /** * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the * device - * @core - device to send the command to - * @lrout - LROUT pin function configuration: + * @core: - device to send the command to + * @lrout: - LROUT pin function configuration: * SI476X_LROUT_NOOP - do not modify the behaviour * SI476X_LROUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -684,15 +675,15 @@ /** * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device - * @core - device to send the command to - * @intb - INTB pin function configuration: + * @core: - device to send the command to + * @intb: - INTB pin function configuration: * SI476X_INTB_NOOP - do not modify the behaviour * SI476X_INTB_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_INTB_DAUDIO - set pin to be a part of digital * audio interface in slave mode * SI476X_INTB_IRQ - set pin to be an interrupt request line - * @a1 - A1 pin function configuration: + * @a1: - A1 pin function configuration: * SI476X_A1_NOOP - do not modify the behaviour * SI476X_A1_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -737,14 +728,10 @@ /** * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the * device - * @core - device to send the command to - * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT, - * RSSSILINT, BLENDINT, MULTHINT and MULTLINT - * @attune - when set the values in the status report are the values - * that were calculated at tune - * @cancel - abort ongoing seek/tune opertation - * @stcack - clear the STCINT bin in status register - * @report - all signal quality information retured by the command + * @core: - device to send the command to + * @rsqargs: - pointer to a structure containing a group of sub-args + * relevant to sending the RSQ status command + * @report: - all signal quality information retured by the command * (if NULL then the output of the command is ignored) * * Function returns 0 on success and negative error code on failure @@ -871,9 +858,9 @@ /** * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the * device - * @core - device to send the command to - * @seekup - if set the direction of the search is 'up' - * @wrap - if set seek wraps when hitting band limit + * @core: - device to send the command to + * @seekup: - if set the direction of the search is 'up' + * @wrap: - if set seek wraps when hitting band limit * * This function begins search for a valid station. The station is * considered valid when 'FM_VALID_SNR_THRESHOLD' and @@ -899,12 +886,14 @@ /** * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the * device - * @core - device to send the command to - * @status_only - if set the data is not removed from RDSFIFO, + * @core: - device to send the command to + * @status_only: - if set the data is not removed from RDSFIFO, * RDSFIFOUSED is not decremented and data in all the * rest RDS data contains the last valid info received - * @mtfifo if set the command clears RDS receive FIFO - * @intack if set the command clards the RDSINT bit. + * @mtfifo: if set the command clears RDS receive FIFO + * @intack: if set the command clards the RDSINT bit. + * @report: - all signal quality information retured by the command + * (if NULL then the output of the command is ignored) * * Function returns 0 on success and negative error code on failure */ @@ -1045,9 +1034,9 @@ /** * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the * device - * @core - device to send the command to - * @seekup - if set the direction of the search is 'up' - * @wrap - if set seek wraps when hitting band limit + * @core: - device to send the command to + * @seekup: - if set the direction of the search is 'up' + * @wrap: - if set seek wraps when hitting band limit * * This function begins search for a valid station. The station is * considered valid when 'FM_VALID_SNR_THRESHOLD' and -- Gitblit v1.6.2