From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/drivers/irqchip/irq-gic-common.c | 57 +++++++++++++++++++++++++++++----------------------------
1 files changed, 29 insertions(+), 28 deletions(-)
diff --git a/kernel/drivers/irqchip/irq-gic-common.c b/kernel/drivers/irqchip/irq-gic-common.c
index 01e673c..f47b41d 100644
--- a/kernel/drivers/irqchip/irq-gic-common.c
+++ b/kernel/drivers/irqchip/irq-gic-common.c
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/interrupt.h>
@@ -36,10 +25,24 @@
gic_kvm_info = info;
}
+void gic_enable_of_quirks(const struct device_node *np,
+ const struct gic_quirk *quirks, void *data)
+{
+ for (; quirks->desc; quirks++) {
+ if (!of_device_is_compatible(np, quirks->compatible))
+ continue;
+ if (quirks->init(data))
+ pr_info("GIC: enabling workaround for %s\n",
+ quirks->desc);
+ }
+}
+
void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
void *data)
{
for (; quirks->desc; quirks++) {
+ if (quirks->compatible)
+ continue;
if (quirks->iidr != (quirks->mask & iidr))
continue;
if (quirks->init(data))
@@ -62,7 +65,7 @@
* for "irq", depending on "type".
*/
raw_spin_lock_irqsave(&irq_controller_lock, flags);
- val = oldval = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
+ val = oldval = readl_relaxed(base + confoff);
if (type & IRQ_TYPE_LEVEL_MASK)
val &= ~confmask;
else if (type & IRQ_TYPE_EDGE_BOTH)
@@ -82,14 +85,10 @@
* does not allow us to set the configuration or we are in a
* non-secure mode, and hence it may not be catastrophic.
*/
- writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
- if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val) {
- if (WARN_ON(irq >= 32))
- ret = -EINVAL;
- else
- pr_warn("GIC: PPI%d is secure or misconfigured\n",
- irq - 16);
- }
+ writel_relaxed(val, base + confoff);
+ if (readl_relaxed(base + confoff) != val)
+ ret = -EINVAL;
+
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
if (sync_access)
@@ -131,23 +130,25 @@
sync_access();
}
-void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
+void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
{
int i;
/*
* Deal with the banked PPI and SGI interrupts - disable all
- * PPI interrupts, ensure all SGI interrupts are enabled.
- * Make sure everything is deactivated.
+ * private interrupts. Make sure everything is deactivated.
*/
- writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
- writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
- writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
+ for (i = 0; i < nr; i += 32) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ }
/*
* Set priority on PPI and SGI interrupts
*/
- for (i = 0; i < 32; i += 4)
+ for (i = 0; i < nr; i += 4)
writel_relaxed(GICD_INT_DEF_PRI_X4,
base + GIC_DIST_PRI + i * 4 / 4);
--
Gitblit v1.6.2