From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/drivers/i2c/busses/i2c-nomadik.c | 23 +++++++++--------------
1 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/kernel/drivers/i2c/busses/i2c-nomadik.c b/kernel/drivers/i2c/busses/i2c-nomadik.c
index 0ed5a41..a3363b2 100644
--- a/kernel/drivers/i2c/busses/i2c-nomadik.c
+++ b/kernel/drivers/i2c/busses/i2c-nomadik.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009 ST-Ericsson SA
* Copyright (C) 2009 STMicroelectronics
@@ -7,10 +8,6 @@
*
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
* Author: Sachin Verma <sachin.verma@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
@@ -399,7 +396,7 @@
* 2 whereas it is 3 for fast and fastplus mode of
* operation. TODO - high speed support.
*/
- div = (dev->clk_freq > 100000) ? 3 : 2;
+ div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
/*
* generate the mask for baud rate counters. The controller
@@ -423,7 +420,7 @@
if (dev->sm > I2C_FREQ_MODE_FAST) {
dev_err(&dev->adev->dev,
"do not support this mode defaulting to std. mode\n");
- brcr2 = i2c_clk/(100000 * 2) & 0xffff;
+ brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
writel(I2C_FREQ_MODE_STANDARD << 4,
dev->virtbase + I2C_CR);
@@ -952,10 +949,10 @@
{
/* Default to 100 kHz if no frequency is given in the node */
if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
- nmk->clk_freq = 100000;
+ nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
/* This driver only supports 'standard' and 'fast' modes of operation. */
- if (nmk->clk_freq <= 100000)
+ if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
nmk->sm = I2C_FREQ_MODE_STANDARD;
else
nmk->sm = I2C_FREQ_MODE_FAST;
@@ -1058,7 +1055,7 @@
return ret;
}
-static int nmk_i2c_remove(struct amba_device *adev)
+static void nmk_i2c_remove(struct amba_device *adev)
{
struct resource *res = &adev->res;
struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
@@ -1070,10 +1067,7 @@
/* disable the controller */
i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
clk_disable_unprepare(dev->clk);
- if (res)
- release_mem_region(res->start, resource_size(res));
-
- return 0;
+ release_mem_region(res->start, resource_size(res));
}
static struct i2c_vendor_data vendor_stn8815 = {
@@ -1126,6 +1120,7 @@
subsys_initcall(nmk_i2c_init);
module_exit(nmk_i2c_exit);
-MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
+MODULE_AUTHOR("Sachin Verma");
+MODULE_AUTHOR("Srinidhi KASAGAR");
MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
MODULE_LICENSE("GPL");
--
Gitblit v1.6.2