From 95099d4622f8cb224d94e314c7a8e0df60b13f87 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 08:38:01 +0000
Subject: [PATCH] enable docker ppp
---
kernel/drivers/extcon/extcon-max77843.c | 45 ++++++++++++++++++++++++++-------------------
1 files changed, 26 insertions(+), 19 deletions(-)
diff --git a/kernel/drivers/extcon/extcon-max77843.c b/kernel/drivers/extcon/extcon-max77843.c
index c9fcd6c..8e6e97e 100644
--- a/kernel/drivers/extcon/extcon-max77843.c
+++ b/kernel/drivers/extcon/extcon-max77843.c
@@ -1,15 +1,10 @@
-/*
- * extcon-max77843.c - Maxim MAX77843 extcon driver to support
- * MUIC(Micro USB Interface Controller)
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Jaewon Kim <jaewon02.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// extcon-max77843.c - Maxim MAX77843 extcon driver to support
+// MUIC(Micro USB Interface Controller)
+//
+// Copyright (C) 2015 Samsung Electronics
+// Author: Jaewon Kim <jaewon02.kim@samsung.com>
#include <linux/extcon-provider.h>
#include <linux/i2c.h>
@@ -779,12 +774,12 @@
{
int ret;
- max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
+ max77843->i2c_muic = i2c_new_dummy_device(max77843->i2c->adapter,
I2C_ADDR_MUIC);
- if (!max77843->i2c_muic) {
+ if (IS_ERR(max77843->i2c_muic)) {
dev_err(&max77843->i2c->dev,
"Cannot allocate I2C device for MUIC\n");
- return -ENOMEM;
+ return PTR_ERR(max77843->i2c_muic);
}
i2c_set_clientdata(max77843->i2c_muic, max77843);
@@ -817,6 +812,8 @@
struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
struct max77843_muic_info *info;
unsigned int id;
+ int cable_type;
+ bool attached;
int i, ret;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
@@ -848,7 +845,7 @@
max77843_extcon_cable);
if (IS_ERR(info->edev)) {
dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
- ret = -ENODEV;
+ ret = PTR_ERR(info->edev);
goto err_muic_irq;
}
@@ -861,9 +858,19 @@
/* Set ADC debounce time */
max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
- /* Set initial path for UART */
- max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true,
- false);
+ /* Set initial path for UART when JIG is connected to get serial logs */
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ goto err_muic_irq;
+ }
+ cable_type = max77843_muic_get_cable_type(info, MAX77843_CABLE_GROUP_ADC,
+ &attached);
+ if (attached && cable_type == MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF)
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART,
+ true, false);
/* Check revision number of MUIC device */
ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
--
Gitblit v1.6.2