From 8d2a02b24d66aa359e83eebc1ed3c0f85367a1cb Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 16 May 2024 03:11:33 +0000
Subject: [PATCH] AX88772C_eeprom and ax8872c build together
---
kernel/drivers/usb/serial/Kconfig | 86 +++++++++++++++++++++----------------------
1 files changed, 42 insertions(+), 44 deletions(-)
diff --git a/kernel/drivers/usb/serial/Kconfig b/kernel/drivers/usb/serial/Kconfig
index 7d03191..169251e 100644
--- a/kernel/drivers/usb/serial/Kconfig
+++ b/kernel/drivers/usb/serial/Kconfig
@@ -6,12 +6,12 @@
menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on TTY
- ---help---
+ help
Say Y here if you have a USB device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
your USB bus.
- Please read <file:Documentation/usb/usb-serial.txt> for more
+ Please read <file:Documentation/usb/usb-serial.rst> for more
information on the specifics of the different devices that are
supported, and on how to use them.
@@ -23,7 +23,7 @@
config USB_SERIAL_CONSOLE
bool "USB Serial Console device support"
depends on USB_SERIAL=y
- ---help---
+ help
If you say Y here, it will be possible to use a USB to serial
converter port as the system console (the system console is the
device which receives all kernel messages and warnings and which
@@ -47,7 +47,7 @@
bool "USB Generic Serial Driver"
help
Say Y here if you want to use the generic USB serial driver. Please
- read <file:Documentation/usb/usb-serial.txt> for more information on
+ read <file:Documentation/usb/usb-serial.rst> for more information on
using this driver. It is recommended that the "USB Serial converter
support" be compiled as a module for this driver to be used
properly.
@@ -66,6 +66,7 @@
- Libtransistor USB console
- a number of Motorola phones
- Motorola Tetra devices
+ - Nokia mobile phones
- Novatel Wireless GPS receivers
- Siemens USB/MPI adapter.
- ViVOtech ViVOpay USB device.
@@ -123,14 +124,11 @@
config USB_SERIAL_DIGI_ACCELEPORT
tristate "USB Digi International AccelePort USB Serial Driver"
- ---help---
+ help
Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
2 port (plus parallel port) and 4 port USB serial converters. The
parallel port on the USB 2 appears as a third serial port on Linux.
The Digi Acceleport USB 8 is not yet supported by this driver.
-
- This driver works under SMP with the usb-uhci driver. It does not
- work under SMP with the uhci driver.
To compile this driver as a module, choose M here: the
module will be called digi_acceleport.
@@ -163,7 +161,7 @@
help
Say Y here if you want to connect to your Empeg empeg-car Mark I/II
mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
- device node. See <file:Documentation/usb/usb-serial.txt> for more
+ device node. See <file:Documentation/usb/usb-serial.rst> for more
tidbits of information.
To compile this driver as a module, choose M here: the
@@ -171,7 +169,7 @@
config USB_SERIAL_FTDI_SIO
tristate "USB FTDI Single Port Serial Driver"
- ---help---
+ help
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
This driver has also been tested with the 245 and 232 devices.
@@ -199,7 +197,7 @@
Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
or any other PDA running Windows CE 3.0 or PocketPC 2002
using a USB cradle/cable. For information on using the driver,
- read <file:Documentation/usb/usb-serial.txt>.
+ read <file:Documentation/usb/usb-serial.rst>.
To compile this driver as a module, choose M here: the
module will be called ipaq.
@@ -216,7 +214,7 @@
config USB_SERIAL_EDGEPORT
tristate "USB Inside Out Edgeport Serial Driver"
- ---help---
+ help
Say Y here if you want to use any of the following devices from
Inside Out Networks (Digi):
Edgeport/4
@@ -269,19 +267,19 @@
config USB_SERIAL_GARMIN
- tristate "USB Garmin GPS driver"
- help
- Say Y here if you want to connect to your Garmin GPS.
- Should work with most Garmin GPS devices which have a native USB port.
+ tristate "USB Garmin GPS driver"
+ help
+ Say Y here if you want to connect to your Garmin GPS.
+ Should work with most Garmin GPS devices which have a native USB port.
- See <http://sourceforge.net/projects/garmin-gps> for the latest
- version of the driver.
+ See <http://sourceforge.net/projects/garmin-gps> for the latest
+ version of the driver.
- To compile this driver as a module, choose M here: the
- module will be called garmin_gps.
+ To compile this driver as a module, choose M here: the
+ module will be called garmin_gps.
config USB_SERIAL_IPW
- tristate "USB IPWireless (3G UMTS TDD) Driver"
+ tristate "USB IPWireless (3G UMTS TDD) Driver"
select USB_SERIAL_WWAN
help
Say Y here if you want to use a IPWireless USB modem such as
@@ -314,7 +312,7 @@
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
select USB_EZUSB_FX2
- ---help---
+ help
Say Y here if you want to use Keyspan USB to serial converter
devices. This driver makes use of Keyspan's official firmware
and was developed with their support. You must also include
@@ -327,39 +325,39 @@
config USB_SERIAL_KLSI
tristate "USB KL5KUSB105 (Palmconnect) Driver"
- ---help---
+ help
Say Y here if you want to use a KL5KUSB105 - based single port
serial adapter. The most widely known -- and currently the only
tested -- device in this category is the PalmConnect USB Serial
adapter sold by Palm Inc. for use with their Palm III and Palm V
series PDAs.
- Please read <file:Documentation/usb/usb-serial.txt> for more
+ Please read <file:Documentation/usb/usb-serial.rst> for more
information.
To compile this driver as a module, choose M here: the
module will be called kl5kusb105.
config USB_SERIAL_KOBIL_SCT
- tristate "USB KOBIL chipcard reader"
- ---help---
- Say Y here if you want to use one of the following KOBIL USB chipcard
- readers:
+ tristate "USB KOBIL chipcard reader"
+ help
+ Say Y here if you want to use one of the following KOBIL USB chipcard
+ readers:
- - USB TWIN
- - KAAN Standard Plus
- - KAAN SIM
- - SecOVID Reader Plus
- - B1 Professional
- - KAAN Professional
+ - USB TWIN
+ - KAAN Standard Plus
+ - KAAN SIM
+ - SecOVID Reader Plus
+ - B1 Professional
+ - KAAN Professional
- Note that you need a current CT-API.
- To compile this driver as a module, choose M here: the
+ Note that you need a current CT-API.
+ To compile this driver as a module, choose M here: the
module will be called kobil_sct.
config USB_SERIAL_MCT_U232
tristate "USB MCT Single Port Serial Driver"
- ---help---
+ help
Say Y here if you want to use a USB Serial single port adapter from
Magic Control Technology Corp. (U232 is one of the model numbers).
@@ -371,7 +369,7 @@
config USB_SERIAL_METRO
tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
- ---help---
+ help
Say Y here if you want to use a USB POS Metrologic barcode scanner.
To compile this driver as a module, choose M here: the
@@ -379,7 +377,7 @@
config USB_SERIAL_MOS7720
tristate "USB Moschip 7720 Serial Driver"
- ---help---
+ help
Say Y here if you want to use USB Serial single and double
port adapters from Moschip Semiconductor Tech.
@@ -391,14 +389,14 @@
depends on USB_SERIAL_MOS7720
depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
select PARPORT_NOT_PC
- ---help---
+ help
Say Y if you have a Moschip 7715 device and would like to use
the parallel port it provides. The port will register with
the parport subsystem as a low-level driver.
config USB_SERIAL_MOS7840
tristate "USB Moschip 7840/7820 USB Serial Driver"
- ---help---
+ help
Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
Dual-Serial port device from MosChip Semiconductor.
@@ -412,7 +410,7 @@
config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver"
- ---help---
+ help
Say Y here if you want to use a MOXA UPort Serial hub.
This driver supports:
@@ -458,7 +456,7 @@
tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
help
Say Y here if you want to use the OTi-6858 single port USB to serial
- converter device.
+ converter device.
To compile this driver as a module, choose M here: the
module will be called oti6858.
@@ -531,7 +529,7 @@
config USB_SERIAL_CYBERJACK
tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
- ---help---
+ help
Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
reader. This is an interface to ISO 7816 compatible contact-based
chipcards, e.g. GSM SIMs.
--
Gitblit v1.6.2