From 8d2a02b24d66aa359e83eebc1ed3c0f85367a1cb Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Thu, 16 May 2024 03:11:33 +0000 Subject: [PATCH] AX88772C_eeprom and ax8872c build together --- kernel/drivers/clocksource/Kconfig | 230 +++++++++++++++++++++++++++++++++++++++++---------------- 1 files changed, 164 insertions(+), 66 deletions(-) diff --git a/kernel/drivers/clocksource/Kconfig b/kernel/drivers/clocksource/Kconfig index 1dbd40f..99c6b44 100644 --- a/kernel/drivers/clocksource/Kconfig +++ b/kernel/drivers/clocksource/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menu "Clock Source drivers" depends on GENERIC_CLOCKEVENTS @@ -43,6 +44,11 @@ help Enables the support for the BCM Kona mobile timer driver. +config DAVINCI_TIMER + bool "Texas Instruments DaVinci timer driver" if COMPILE_TEST + help + Enables the support for the TI DaVinci timer driver. + config DIGICOLOR_TIMER bool "Digicolor timer driver" if COMPILE_TEST select CLKSRC_MMIO @@ -70,13 +76,23 @@ Enables support for the Faraday Technology timer block FTTMR010. +config IXP4XX_TIMER + bool "Intel XScale IXP4xx timer driver" if COMPILE_TEST + depends on HAS_IOMEM + select CLKSRC_MMIO + select TIMER_OF if OF + help + Enables support for the Intel XScale IXP4xx SoC timer. + config ROCKCHIP_TIMER - bool "Rockchip timer driver" if COMPILE_TEST + tristate "Rockchip timer driver" + default ARCH_ROCKCHIP + depends on ARCH_ROCKCHIP || COMPILE_TEST depends on ARM || ARM64 select TIMER_OF select CLKSRC_MMIO help - Enables the support for the rockchip timer driver. + Enables the support for the Rockchip timer driver. config ARMADA_370_XP_TIMER bool "Armada 370 and XP timer driver" if COMPILE_TEST @@ -106,8 +122,15 @@ help Enables the support for the Actions Semi Owl timer driver. +config RDA_TIMER + bool "RDA timer driver" if COMPILE_TEST + select CLKSRC_MMIO + select TIMER_OF + help + Enables the support for the RDA Micro timer driver. + config SUN4I_TIMER - bool "Sun4i timer driver" if COMPILE_TEST + bool "Sun4i timer driver" depends on HAS_IOMEM select CLKSRC_MMIO select TIMER_OF @@ -124,7 +147,8 @@ config TEGRA_TIMER bool "Tegra timer driver" if COMPILE_TEST select CLKSRC_MMIO - depends on ARM + select TIMER_OF + depends on ARCH_TEGRA || COMPILE_TEST help Enables support for the Tegra driver. @@ -141,13 +165,13 @@ select CLKSRC_MMIO help Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture, - While TIMER0 serves as clockevent and TIMER1 serves as clocksource. + where TIMER0 serves as clockevent and TIMER1 serves as clocksource. config CADENCE_TTC_TIMER bool "Cadence TTC timer driver" if COMPILE_TEST depends on COMMON_CLK help - Enables support for the cadence ttc driver. + Enables support for the Cadence TTC driver. config ASM9260_TIMER bool "ASM9260 timer driver" if COMPILE_TEST @@ -165,20 +189,14 @@ to multiple interrupt generating programmable 32-bit free running decrementing counters. -config CLKSRC_NOMADIK_MTU_SCHED_CLOCK - bool - depends on CLKSRC_NOMADIK_MTU - help - Use the Multi Timer Unit as the sched_clock. - config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" if COMPILE_TEST depends on HAS_IOMEM help - Use the always on PRCMU Timer as clocksource + Use the always on PRCMU Timer as clocksource. config CLPS711X_TIMER - bool "Cirrus logic timer driver" if COMPILE_TEST + bool "Cirrus Logic timer driver" if COMPILE_TEST select CLKSRC_MMIO help Enables support for the Cirrus Logic PS711 timer. @@ -190,11 +208,11 @@ Enables support for the Atlas7 timer. config MXS_TIMER - bool "Mxs timer driver" if COMPILE_TEST + bool "MXS timer driver" if COMPILE_TEST select CLKSRC_MMIO select STMP_DEVICE help - Enables support for the Mxs timer. + Enables support for the MXS timer. config PRIMA2_TIMER bool "Prima2 timer driver" if COMPILE_TEST @@ -223,17 +241,10 @@ Enables support for the Keystone timer. config INTEGRATOR_AP_TIMER - bool "Integrator-ap timer driver" if COMPILE_TEST + bool "Integrator-AP timer driver" if COMPILE_TEST select CLKSRC_MMIO help - Enables support for the Integrator-ap timer. - -config CLKSRC_DBX500_PRCMU_SCHED_CLOCK - bool "Clocksource PRCMU Timer sched_clock" - depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK) - default y - help - Use the always on PRCMU Timer as sched_clock + Enables support for the Integrator-AP timer. config CLKSRC_EFM32 bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32 @@ -275,14 +286,18 @@ select TIMER_OF if OF help NPS400 clocksource support. - Got 64 bit counter with update rate up to 1000MHz. - This counter is accessed via couple of 32 bit memory mapped registers. + It has a 64-bit counter with update rate up to 1000MHz. + This counter is accessed via couple of 32-bit memory-mapped registers. config CLKSRC_STM32 bool "Clocksource for STM32 SoCs" if !ARCH_STM32 depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) select CLKSRC_MMIO select TIMER_OF + +config CLKSRC_STM32_LP + bool "Low power clocksource for STM32 SoCs" + depends on MFD_STM32_LPTIMER || COMPILE_TEST config CLKSRC_MPS2 bool "Clocksource for MPS2 SoCs" if COMPILE_TEST @@ -297,14 +312,14 @@ help These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores (ARC700 as well as ARC HS38). - TIMER0 serves as clockevent while TIMER1 provides clocksource + TIMER0 serves as clockevent while TIMER1 provides clocksource. config ARC_TIMERS_64BIT bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST depends on ARC_TIMERS select TIMER_OF help - This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP) + This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP). RTC is implemented inside the core, while GFRC sits outside the core in ARConnect IP block. Driver automatically picks one of them for clocksource as appropriate. @@ -382,10 +397,10 @@ select TIMER_OF if OF depends on ARM help - This options enables support for the ARM global timer unit + This option enables support for the ARM global timer unit. config ARM_TIMER_SP804 - bool "Support for Dual Timer SP804 module" + bool "Support for Dual Timer SP804 module" if COMPILE_TEST depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP select CLKSRC_MMIO select TIMER_OF if OF @@ -395,21 +410,21 @@ depends on ARM_GLOBAL_TIMER default y help - Use ARM global timer clock source as sched_clock + Use ARM global timer clock source as sched_clock. config ARMV7M_SYSTICK bool "Support for the ARMv7M system time" if COMPILE_TEST select TIMER_OF if OF select CLKSRC_MMIO help - This options enables support for the ARMv7M system timer unit + This option enables support for the ARMv7M system timer unit. config ATMEL_PIT - bool "Microchip ARM Periodic Interval Timer (PIT)" if COMPILE_TEST + bool "Atmel PIT support" if COMPILE_TEST + depends on HAS_IOMEM select TIMER_OF if OF help - This enables build of clocksource and clockevent driver for - the integrated PIT in Microchip ARM SoCs. + Support for the Periodic Interval Timer found on Atmel SoCs. config ATMEL_ST bool "Atmel ST timer support" if COMPILE_TEST @@ -419,13 +434,12 @@ help Support for the Atmel ST timer. -config ATMEL_ARM_TCB_CLKSRC - bool "Microchip ARM TC Block" if COMPILE_TEST - select REGMAP_MMIO - depends on GENERIC_CLOCKEVENTS +config ATMEL_TCB_CLKSRC + bool "Atmel TC Block timer driver" if COMPILE_TEST + depends on ARM && HAS_IOMEM + select TIMER_OF if OF help - This enables build of clocksource and clockevent driver for - the integrated Timer Counter Blocks in Microchip ARM SoCs. + Support for Timer Counter Blocks on Atmel SoCs. config CLKSRC_EXYNOS_MCT bool "Exynos multi core timer driver" if COMPILE_TEST @@ -453,7 +467,7 @@ bool select CLKSRC_MMIO help - Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. + Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs. config OXNAS_RPS_TIMER bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST @@ -463,10 +477,10 @@ This enables support for the Oxford Semiconductor OXNAS RPS timers. config SYS_SUPPORTS_SH_CMT - bool + bool config MTK_TIMER - bool "Mediatek timer driver" if COMPILE_TEST + bool "Mediatek timer driver" depends on HAS_IOMEM select TIMER_OF select CLKSRC_MMIO @@ -483,13 +497,13 @@ Enables support for the Spreadtrum timer driver. config SYS_SUPPORTS_SH_MTU2 - bool + bool config SYS_SUPPORTS_SH_TMU - bool + bool config SYS_SUPPORTS_EM_STI - bool + bool config CLKSRC_JCORE_PIT bool "J-Core PIT timer driver" if COMPILE_TEST @@ -516,11 +530,12 @@ help This enables build of a clockevent driver for the Multi-Function Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas. - This hardware comes with 16 bit-timer registers. + This hardware comes with 16-bit timer registers. config RENESAS_OSTM bool "Renesas OSTM timer driver" if COMPILE_TEST select CLKSRC_MMIO + select TIMER_OF help Enables the support for the Renesas OSTM. @@ -554,16 +569,16 @@ bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET select TIMER_OF - default y if MFD_VEXPRESS_SYSREG + default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM help This option enables clock source based on free running counter available in the "System Registers" block of - ARM Versatile, RealView and Versatile Express reference - platforms. + ARM Versatile and Versatile Express reference platforms. config CLKSRC_MIPS_GIC bool depends on MIPS_GIC + select CLOCKSOURCE_WATCHDOG select TIMER_OF config CLKSRC_TANGO_XTAL @@ -572,7 +587,7 @@ select TIMER_OF select CLKSRC_MMIO help - This enables the clocksource for Tango SoC + This enables the clocksource for Tango SoC. config CLKSRC_PXA bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST @@ -583,37 +598,45 @@ platforms. config H8300_TMR8 - bool "Clockevent timer for the H8300 platform" if COMPILE_TEST - depends on HAS_IOMEM + bool "Clockevent timer for the H8300 platform" if COMPILE_TEST + depends on HAS_IOMEM help This enables the 8 bits timer for the H8300 platform. config H8300_TMR16 - bool "Clockevent timer for the H83069 platform" if COMPILE_TEST - depends on HAS_IOMEM + bool "Clockevent timer for the H83069 platform" if COMPILE_TEST + depends on HAS_IOMEM help This enables the 16 bits timer for the H8300 platform with the - H83069 cpu. + H83069 CPU. config H8300_TPU - bool "Clocksource for the H8300 platform" if COMPILE_TEST - depends on HAS_IOMEM + bool "Clocksource for the H8300 platform" if COMPILE_TEST + depends on HAS_IOMEM help This enables the clocksource for the H8300 platform with the - H8S2678 cpu. + H8S2678 CPU. config CLKSRC_IMX_GPT bool "Clocksource using i.MX GPT" if COMPILE_TEST - depends on ARM && CLKDEV_LOOKUP + depends on (ARM || ARM64) && CLKDEV_LOOKUP select CLKSRC_MMIO config CLKSRC_IMX_TPM bool "Clocksource using i.MX TPM" if COMPILE_TEST - depends on ARM && CLKDEV_LOOKUP + depends on (ARM || ARM64) && CLKDEV_LOOKUP select CLKSRC_MMIO + select TIMER_OF help Enable this option to use IMX Timer/PWM Module (TPM) timer as clocksource. + +config TIMER_IMX_SYS_CTR + bool "i.MX system counter timer" if COMPILE_TEST + select TIMER_OF + help + Enable this option to use i.MX system counter timer as a + clockevent. config CLKSRC_ST_LPC bool "Low power clocksource found in the LPC" if COMPILE_TEST @@ -634,9 +657,8 @@ This option enables support for the Andestech ATCPIT100 timers. config RISCV_TIMER - bool "Timer for the RISC-V platform" - depends on RISCV - default y + bool "Timer for the RISC-V platform" if COMPILE_TEST + depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI select TIMER_PROBE select TIMER_OF help @@ -644,4 +666,80 @@ is accessed via both the SBI and the rdcycle instruction. This is required for all RISC-V systems. +config CLINT_TIMER + bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST + depends on GENERIC_SCHED_CLOCK && RISCV + select TIMER_PROBE + select TIMER_OF + help + This option enables the CLINT timer for RISC-V systems. The CLINT + driver is usually used for NoMMU RISC-V systems. + +config CSKY_MP_TIMER + bool "SMP Timer for the C-SKY platform" if COMPILE_TEST + depends on CSKY + select TIMER_OF + help + Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP + system. + csky,mptimer is not only used in SMP system, it also could be used in + single core system. It's not a mmio reg and it uses mtcr/mfcr instruction. + +config GX6605S_TIMER + bool "Gx6605s SOC system timer driver" if COMPILE_TEST + depends on CSKY + select CLKSRC_MMIO + select TIMER_OF + help + This option enables support for gx6605s SOC's timer. + +config MILBEAUT_TIMER + bool "Milbeaut timer driver" if COMPILE_TEST + depends on OF + depends on ARM + select TIMER_OF + select CLKSRC_MMIO + help + Enables the support for Milbeaut timer driver. + +config INGENIC_TIMER + bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" + default MACH_INGENIC + depends on MIPS || COMPILE_TEST + depends on COMMON_CLK + select MFD_SYSCON + select TIMER_OF + select IRQ_DOMAIN + help + Support for the timer/counter unit of the Ingenic JZ SoCs. + +config INGENIC_SYSOST + bool "Clocksource/timer using the SYSOST in Ingenic X SoCs" + depends on MIPS || COMPILE_TEST + depends on COMMON_CLK + select MFD_SYSCON + select TIMER_OF + select IRQ_DOMAIN + help + Support for the SYSOST of the Ingenic X Series SoCs. + +config INGENIC_OST + bool "Clocksource using the OST in Ingenic JZ SoCs" + depends on MIPS || COMPILE_TEST + depends on COMMON_CLK + select MFD_SYSCON + help + Support for the Operating System Timer of the Ingenic JZ SoCs. + +config MICROCHIP_PIT64B + bool "Microchip PIT64B support" + depends on OF || COMPILE_TEST + select CLKSRC_MMIO + select TIMER_OF + help + This option enables Microchip PIT64B timer for Atmel + based system. It supports the oneshot, the periodic + modes and high resolution. It is used as a clocksource + and a clockevent. + endmenu -- Gitblit v1.6.2