From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/tools/testing/selftests/rseq/rseq-ppc.h | 218 ++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 169 insertions(+), 49 deletions(-)
diff --git a/kernel/tools/testing/selftests/rseq/rseq-ppc.h b/kernel/tools/testing/selftests/rseq/rseq-ppc.h
index 52630c9..bab8e0b 100644
--- a/kernel/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/kernel/tools/testing/selftests/rseq/rseq-ppc.h
@@ -6,7 +6,15 @@
* (C) Copyright 2016-2018 - Boqun Feng <boqun.feng@gmail.com>
*/
-#define RSEQ_SIG 0x53053053
+/*
+ * RSEQ_SIG is used with the following trap instruction:
+ *
+ * powerpc-be: 0f e5 00 0b twui r5,11
+ * powerpc64-le: 0b 00 e5 0f twui r5,11
+ * powerpc64-be: 0f e5 00 0b twui r5,11
+ */
+
+#define RSEQ_SIG 0x0fe5000b
#define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory", "cc")
#define rseq_smp_lwsync() __asm__ __volatile__ ("lwsync" ::: "memory", "cc")
@@ -33,24 +41,30 @@
#else /* !RSEQ_SKIP_FASTPATH */
/*
- * The __rseq_table section can be used by debuggers to better handle
- * single-stepping through the restartable critical sections.
+ * The __rseq_cs_ptr_array and __rseq_cs sections can be used by debuggers to
+ * better handle single-stepping through the restartable critical sections.
*/
#ifdef __PPC64__
-#define STORE_WORD "std "
-#define LOAD_WORD "ld "
-#define LOADX_WORD "ldx "
-#define CMP_WORD "cmpd "
+#define RSEQ_STORE_LONG(arg) "std%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */
+#define RSEQ_STORE_INT(arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */
+#define RSEQ_LOAD_LONG(arg) "ld%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */
+#define RSEQ_LOAD_INT(arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */
+#define RSEQ_LOADX_LONG "ldx " /* From base register ("b" constraint) */
+#define RSEQ_CMP_LONG "cmpd "
+#define RSEQ_CMP_LONG_INT "cmpdi "
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(label) "b\n\t" \
".popsection\n\t"
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
@@ -63,28 +77,61 @@
"std %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \
__rseq_str(label) ":\n\t"
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
+ ".popsection\n\t"
+
#else /* #ifdef __PPC64__ */
-#define STORE_WORD "stw "
-#define LOAD_WORD "lwz "
-#define LOADX_WORD "lwzx "
-#define CMP_WORD "cmpw "
+#define RSEQ_STORE_LONG(arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */
+#define RSEQ_STORE_INT(arg) RSEQ_STORE_LONG(arg) /* To memory ("m" constraint) */
+#define RSEQ_LOAD_LONG(arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */
+#define RSEQ_LOAD_INT(arg) RSEQ_LOAD_LONG(arg) /* From memory ("m" constraint) */
+#define RSEQ_LOADX_LONG "lwzx " /* From base register ("b" constraint) */
+#define RSEQ_CMP_LONG "cmpw "
+#define RSEQ_CMP_LONG_INT "cmpwi "
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
/* 32-bit only supported on BE */ \
".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".long 0x0, " __rseq_str(label) "b\n\t" \
+ ".popsection\n\t"
+
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ /* 32-bit only supported on BE */ \
+ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
"lis %%r17, (" __rseq_str(cs_label) ")@ha\n\t" \
"addi %%r17, %%r17, (" __rseq_str(cs_label) ")@l\n\t" \
- "stw %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \
+ RSEQ_STORE_INT(rseq_cs) "%%r17, %[" __rseq_str(rseq_cs) "]\n\t" \
__rseq_str(label) ":\n\t"
#endif /* #ifdef __PPC64__ */
@@ -95,7 +142,7 @@
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
RSEQ_INJECT_ASM(2) \
- "lwz %%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \
+ RSEQ_LOAD_INT(current_cpu_id) "%%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \
"cmpw cr7, %[" __rseq_str(cpu_id) "], %%r17\n\t" \
"bne- cr7, " __rseq_str(label) "\n\t"
@@ -112,25 +159,25 @@
* RSEQ_ASM_OP_* (else): doesn't have hard-code registers(unless cr7)
*/
#define RSEQ_ASM_OP_CMPEQ(var, expect, label) \
- LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \
- CMP_WORD "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \
+ RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \
+ RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \
"bne- cr7, " __rseq_str(label) "\n\t"
#define RSEQ_ASM_OP_CMPNE(var, expectnot, label) \
- LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \
- CMP_WORD "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \
+ RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \
+ RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \
"beq- cr7, " __rseq_str(label) "\n\t"
#define RSEQ_ASM_OP_STORE(value, var) \
- STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t"
+ RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t"
/* Load @var to r17 */
#define RSEQ_ASM_OP_R_LOAD(var) \
- LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t"
+ RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t"
/* Store r17 to @var */
#define RSEQ_ASM_OP_R_STORE(var) \
- STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t"
+ RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t"
/* Add @count to r17 */
#define RSEQ_ASM_OP_R_ADD(count) \
@@ -138,11 +185,11 @@
/* Load (r17 + voffp) to r17 */
#define RSEQ_ASM_OP_R_LOADX(voffp) \
- LOADX_WORD "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t"
+ RSEQ_LOADX_LONG "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t"
/* TODO: implement a faster memcpy. */
#define RSEQ_ASM_OP_R_MEMCPY() \
- "cmpdi %%r19, 0\n\t" \
+ RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \
"beq 333f\n\t" \
"addi %%r20, %%r20, -1\n\t" \
"addi %%r21, %%r21, -1\n\t" \
@@ -150,16 +197,16 @@
"lbzu %%r18, 1(%%r20)\n\t" \
"stbu %%r18, 1(%%r21)\n\t" \
"addi %%r19, %%r19, -1\n\t" \
- "cmpdi %%r19, 0\n\t" \
+ RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \
"bne 222b\n\t" \
"333:\n\t" \
#define RSEQ_ASM_OP_R_FINAL_STORE(var, post_commit_label) \
- STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \
+ RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \
__rseq_str(post_commit_label) ":\n\t"
#define RSEQ_ASM_OP_FINAL_STORE(value, var, post_commit_label) \
- STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \
+ RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \
__rseq_str(post_commit_label) ":\n\t"
static inline __attribute__((always_inline))
@@ -169,6 +216,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -189,8 +241,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -202,28 +254,38 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -250,8 +312,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -265,16 +327,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -286,6 +353,9 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -305,8 +375,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[count] "r" (count)
@@ -318,12 +388,15 @@
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -337,6 +410,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -360,8 +438,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -377,16 +455,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -400,6 +483,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -425,8 +513,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -442,16 +530,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -465,6 +558,12 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -490,8 +589,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -507,18 +606,24 @@
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -532,6 +637,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* setup for mempcy */
"mr %%r19, %[len]\n\t"
"mr %%r20, %[src]\n\t"
@@ -560,8 +670,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -578,16 +688,21 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -601,6 +716,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* setup for mempcy */
"mr %%r19, %[len]\n\t"
"mr %%r20, %[src]\n\t"
@@ -631,8 +751,8 @@
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -649,23 +769,23 @@
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
-
-#undef STORE_WORD
-#undef LOAD_WORD
-#undef LOADX_WORD
-#undef CMP_WORD
#endif /* !RSEQ_SKIP_FASTPATH */
--
Gitblit v1.6.2