From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/net/mac80211/offchannel.c | 64 ++++++++++++-------------------
1 files changed, 25 insertions(+), 39 deletions(-)
diff --git a/kernel/net/mac80211/offchannel.c b/kernel/net/mac80211/offchannel.c
index 8ef4153..853c9a3 100644
--- a/kernel/net/mac80211/offchannel.c
+++ b/kernel/net/mac80211/offchannel.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Off-channel operation helpers
*
@@ -7,10 +8,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2019 Intel Corporation
*/
#include <linux/export.h>
#include <net/mac80211.h>
@@ -28,8 +26,7 @@
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
- local->offchannel_ps_enabled = false;
+ bool offchannel_ps_enabled = false;
/* FIXME: what to do when local->pspolling is true? */
@@ -40,12 +37,12 @@
cancel_work_sync(&local->dynamic_ps_enable_work);
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
- local->offchannel_ps_enabled = true;
+ offchannel_ps_enabled = true;
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
- if (!local->offchannel_ps_enabled ||
+ if (!offchannel_ps_enabled ||
!ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
/*
* If power save was enabled, no need to send a nullfunc
@@ -60,38 +57,19 @@
ieee80211_send_nullfunc(local, sdata, true);
}
-/* inform AP that we are awake again, unless power save is enabled */
+/* inform AP that we are awake again */
static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
if (!local->ps_sdata)
ieee80211_send_nullfunc(local, sdata, false);
- else if (local->offchannel_ps_enabled) {
+ else if (local->hw.conf.dynamic_ps_timeout > 0) {
/*
- * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
- * will send a nullfunc frame with the powersave bit set
- * even though the AP already knows that we are sleeping.
- * This could be avoided by sending a null frame with power
- * save bit disabled before enabling the power save, but
- * this doesn't gain anything.
- *
- * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
- * to send a nullfunc frame because AP already knows that
- * we are sleeping, let's just enable power save mode in
- * hardware.
- */
- /* TODO: Only set hardware if CONF_PS changed?
- * TODO: Should we set offchannel_ps_enabled to false?
- */
- local->hw.conf.flags |= IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- } else if (local->hw.conf.dynamic_ps_timeout > 0) {
- /*
- * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
- * had been running before leaving the operating channel,
- * restart the timer now and send a nullfunc frame to inform
- * the AP that we are awake.
+ * the dynamic_ps_timer had been running before leaving the
+ * operating channel, restart the timer now and send a nullfunc
+ * frame to inform the AP that we are awake so that AP sends
+ * the buffered packets (if any).
*/
ieee80211_send_nullfunc(local, sdata, false);
mod_timer(&local->dynamic_ps_timer, jiffies +
@@ -202,6 +180,10 @@
cfg80211_remain_on_channel_expired(&roc->sdata->wdev,
roc->cookie, roc->chan,
GFP_KERNEL);
+ else
+ cfg80211_tx_mgmt_expired(&roc->sdata->wdev,
+ roc->mgmt_tx_cookie,
+ roc->chan, GFP_KERNEL);
list_del(&roc->list);
kfree(roc);
@@ -262,7 +244,7 @@
if (roc->mgmt_tx_cookie) {
if (!WARN_ON(!roc->frame)) {
ieee80211_tx_skb_tid_band(roc->sdata, roc->frame, 7,
- roc->chan->band, 0);
+ roc->chan->band);
roc->frame = NULL;
}
} else {
@@ -555,6 +537,10 @@
lockdep_assert_held(&local->mtx);
+ if (channel->freq_offset)
+ /* this may work, but is untested */
+ return -EOPNOTSUPP;
+
if (local->use_chanctx && !local->ops->remain_on_channel)
return -EOPNOTSUPP;
@@ -731,7 +717,7 @@
}
if (local->ops->remain_on_channel) {
- ret = drv_cancel_remain_on_channel(local);
+ ret = drv_cancel_remain_on_channel(local, roc->sdata);
if (WARN_ON_ONCE(ret)) {
mutex_unlock(&local->mtx);
return ret;
@@ -802,13 +788,13 @@
if (!sdata->vif.bss_conf.ibss_joined)
need_offchan = true;
#ifdef CONFIG_MAC80211_MESH
- /* fall through */
+ fallthrough;
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif) &&
!sdata->u.mesh.mesh_id_len)
need_offchan = true;
#endif
- /* fall through */
+ fallthrough;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
@@ -910,7 +896,7 @@
if (beacon)
for (i = 0; i < params->n_csa_offsets; i++)
data[params->csa_offsets[i]] =
- beacon->csa_current_counter;
+ beacon->cntdwn_current_counter;
rcu_read_unlock();
}
@@ -990,7 +976,7 @@
if (roc->started) {
if (local->ops->remain_on_channel) {
/* can race, so ignore return value */
- drv_cancel_remain_on_channel(local);
+ drv_cancel_remain_on_channel(local, sdata);
ieee80211_roc_notify_destroy(roc);
} else {
roc->abort = true;
--
Gitblit v1.6.2