From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Tue, 22 Oct 2024 10:36:11 +0000 Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM --- kernel/net/mac80211/Kconfig | 85 +++++++++++++++++------------------------- 1 files changed, 35 insertions(+), 50 deletions(-) diff --git a/kernel/net/mac80211/Kconfig b/kernel/net/mac80211/Kconfig index 76e30f4..51ec825 100644 --- a/kernel/net/mac80211/Kconfig +++ b/kernel/net/mac80211/Kconfig @@ -1,14 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only config MAC80211 tristate "Generic IEEE 802.11 Networking Stack (mac80211)" depends on CFG80211 select CRYPTO - select CRYPTO_ARC4 + select CRYPTO_LIB_ARC4 select CRYPTO_AES select CRYPTO_CCM select CRYPTO_GCM select CRYPTO_CMAC select CRC32 - ---help--- + help This option enables the hardware independent IEEE 802.11 networking stack. @@ -24,28 +25,14 @@ bool "Minstrel" if EXPERT select MAC80211_HAS_RC default y - ---help--- + help This option enables the 'minstrel' TX rate control algorithm - -config MAC80211_RC_MINSTREL_HT - bool "Minstrel 802.11n support" if EXPERT - depends on MAC80211_RC_MINSTREL - default y - ---help--- - This option enables the 'minstrel_ht' TX rate control algorithm - -config MAC80211_RC_MINSTREL_VHT - bool "Minstrel 802.11ac support" if EXPERT - depends on MAC80211_RC_MINSTREL_HT - default n - ---help--- - This option enables VHT in the 'minstrel_ht' TX rate control algorithm choice prompt "Default rate control algorithm" depends on MAC80211_HAS_RC default MAC80211_RC_DEFAULT_MINSTREL - ---help--- + help This option selects the default rate control algorithm mac80211 will use. Note that this default can still be overridden through the ieee80211_default_rc_algo module @@ -54,7 +41,7 @@ config MAC80211_RC_DEFAULT_MINSTREL bool "Minstrel" depends on MAC80211_RC_MINSTREL - ---help--- + help Select Minstrel as the default rate control algorithm. @@ -62,8 +49,7 @@ config MAC80211_RC_DEFAULT string - default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT - default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL + default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL default "" endif @@ -72,28 +58,27 @@ depends on MAC80211 && MAC80211_HAS_RC=n config MAC80211_MESH - bool "Enable mac80211 mesh networking (pre-802.11s) support" + bool "Enable mac80211 mesh networking support" depends on MAC80211 - ---help--- - This options enables support of Draft 802.11s mesh networking. - The implementation is based on Draft 2.08 of the Mesh Networking - amendment. However, no compliance with that draft is claimed or even - possible, as drafts leave a number of identifiers to be defined after - ratification. For more information visit http://o11s.org/. + help + Select this option to enable 802.11 mesh operation in mac80211 + drivers that support it. 802.11 mesh connects multiple stations + over (possibly multi-hop) wireless links to form a single logical + LAN. config MAC80211_LEDS bool "Enable LED triggers" depends on MAC80211 - depends on LEDS_CLASS + depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211 select LEDS_TRIGGERS - ---help--- + help This option enables a few LED triggers for different packet receive/transmit events. config MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" depends on MAC80211 && DEBUG_FS - ---help--- + help Select this to see extensive information about the internal state of mac80211 in debugfs. @@ -102,7 +87,7 @@ config MAC80211_MESSAGE_TRACING bool "Trace all mac80211 debug messages" depends on MAC80211 - ---help--- + help Select this option to have mac80211 register the mac80211_msg trace subsystem with tracepoints to collect all debugging messages, independent of @@ -115,13 +100,13 @@ menuconfig MAC80211_DEBUG_MENU bool "Select mac80211 debugging features" depends on MAC80211 - ---help--- + help This option collects various mac80211 debug settings. config MAC80211_NOINLINE bool "Do not inline TX/RX handlers" depends on MAC80211_DEBUG_MENU - ---help--- + help This option affects code generation in mac80211, when selected some functions are marked "noinline" to allow easier debugging of problems in the transmit and receive @@ -137,7 +122,7 @@ config MAC80211_VERBOSE_DEBUG bool "Verbose debugging output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out many debugging messages. It should not be selected on production systems as some of the messages are @@ -148,7 +133,7 @@ config MAC80211_MLME_DEBUG bool "Verbose managed MLME output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for the managed-mode MLME. It should not be selected on production systems as some @@ -159,7 +144,7 @@ config MAC80211_STA_DEBUG bool "Verbose station debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for station addition/removal. @@ -168,7 +153,7 @@ config MAC80211_HT_DEBUG bool "Verbose HT debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help This option enables 802.11n High Throughput features debug tracing output. @@ -180,7 +165,7 @@ config MAC80211_OCB_DEBUG bool "Verbose OCB debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose OCB debugging messages. It should not be selected on production systems as those messages @@ -191,7 +176,7 @@ config MAC80211_IBSS_DEBUG bool "Verbose IBSS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose IBSS debugging messages. It should not be selected on production systems as those messages @@ -202,7 +187,7 @@ config MAC80211_PS_DEBUG bool "Verbose powersave mode debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose power save mode debugging messages (when mac80211 is an AP and has power saving stations.) @@ -215,7 +200,7 @@ bool "Verbose mesh peer link debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh peer link debugging messages (when mac80211 is taking part in a mesh network). @@ -228,7 +213,7 @@ bool "Verbose mesh path debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh path selection debugging messages (when mac80211 is taking part in a mesh network). @@ -241,7 +226,7 @@ bool "Verbose mesh HWMP routing debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh routing (HWMP) debugging messages (when mac80211 is taking part in a mesh network). @@ -254,7 +239,7 @@ bool "Verbose mesh synchronization debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh synchronization debugging messages (when mac80211 is taking part in a mesh network). @@ -265,7 +250,7 @@ bool "Verbose mesh channel switch debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh channel switch debugging messages (when mac80211 is taking part in a mesh network). @@ -276,7 +261,7 @@ bool "Verbose mesh powersave debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh powersave debugging messages (when mac80211 is taking part in a mesh network). @@ -286,7 +271,7 @@ config MAC80211_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose TDLS selection debugging messages (when mac80211 is a TDLS STA). @@ -299,7 +284,7 @@ bool "Extra statistics for TX/RX debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_DEBUGFS - ---help--- + help Selecting this option causes mac80211 to keep additional and very verbose statistics about TX and RX handler use as well as a few selected dot11 counters. These will be @@ -313,7 +298,7 @@ config MAC80211_STA_HASH_MAX_SIZE int "Station hash table maximum size" if MAC80211_DEBUG_MENU default 0 - ---help--- + help Setting this option to a low value (e.g. 4) allows testing the hash table with collisions relatively deterministically (just connect more stations than the number selected here.) -- Gitblit v1.6.2