From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/net/hsr/hsr_slave.c | 106 ++++++++++++++++++++++++++++++----------------------
1 files changed, 61 insertions(+), 45 deletions(-)
diff --git a/kernel/net/hsr/hsr_slave.c b/kernel/net/hsr/hsr_slave.c
index b215df0..aecc05a 100644
--- a/kernel/net/hsr/hsr_slave.c
+++ b/kernel/net/hsr/hsr_slave.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/* Copyright 2011-2014 Autronica Fire and Security AS
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
*
* Author(s):
* 2011-2014 Arvid Brodin, arvid.brodin@alten.se
+ *
+ * Frame handler other utility functions for HSR and PRP.
*/
#include "hsr_slave.h"
@@ -18,22 +16,31 @@
#include "hsr_forward.h"
#include "hsr_framereg.h"
+bool hsr_invalid_dan_ingress_frame(__be16 protocol)
+{
+ return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
+}
static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
{
struct sk_buff *skb = *pskb;
struct hsr_port *port;
- u16 protocol;
+ struct hsr_priv *hsr;
+ __be16 protocol;
+
+ /* Packets from dev_loopback_xmit() do not have L2 header, bail out */
+ if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+ return RX_HANDLER_PASS;
if (!skb_mac_header_was_set(skb)) {
WARN_ONCE(1, "%s: skb invalid", __func__);
return RX_HANDLER_PASS;
}
- rcu_read_lock(); /* hsr->node_db, hsr->ports */
port = hsr_port_get_rcu(skb->dev);
if (!port)
goto finish_pass;
+ hsr = port->hsr;
if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
/* Directly kill frames sent by ourselves */
@@ -41,20 +48,28 @@
goto finish_consume;
}
+ /* For HSR, only tagged frames are expected, but for PRP
+ * there could be non tagged frames as well from Single
+ * attached nodes (SANs).
+ */
protocol = eth_hdr(skb)->h_proto;
- if (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR))
+ if (hsr->proto_ops->invalid_dan_ingress_frame &&
+ hsr->proto_ops->invalid_dan_ingress_frame(protocol))
goto finish_pass;
skb_push(skb, ETH_HLEN);
+ skb_reset_mac_header(skb);
+ if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
+ protocol == htons(ETH_P_HSR))
+ skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
+ skb_reset_mac_len(skb);
hsr_forward_skb(skb, port);
finish_consume:
- rcu_read_unlock(); /* hsr->node_db, hsr->ports */
return RX_HANDLER_CONSUMED;
finish_pass:
- rcu_read_unlock(); /* hsr->node_db, hsr->ports */
return RX_HANDLER_PASS;
}
@@ -63,34 +78,37 @@
return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
}
-
-static int hsr_check_dev_ok(struct net_device *dev)
+static int hsr_check_dev_ok(struct net_device *dev,
+ struct netlink_ext_ack *extack)
{
/* Don't allow HSR on non-ethernet like devices */
- if ((dev->flags & IFF_LOOPBACK) || (dev->type != ARPHRD_ETHER) ||
- (dev->addr_len != ETH_ALEN)) {
- netdev_info(dev, "Cannot use loopback or non-ethernet device as HSR slave.\n");
+ if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
+ dev->addr_len != ETH_ALEN) {
+ NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
return -EINVAL;
}
/* Don't allow enslaving hsr devices */
if (is_hsr_master(dev)) {
- netdev_info(dev, "Cannot create trees of HSR devices.\n");
+ NL_SET_ERR_MSG_MOD(extack,
+ "Cannot create trees of HSR devices.");
return -EINVAL;
}
if (hsr_port_exists(dev)) {
- netdev_info(dev, "This device is already a HSR slave.\n");
+ NL_SET_ERR_MSG_MOD(extack,
+ "This device is already a HSR slave.");
return -EINVAL;
}
if (is_vlan_dev(dev)) {
- netdev_info(dev, "HSR on top of VLAN is not yet supported in this driver.\n");
+ NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
return -EINVAL;
}
if (dev->priv_flags & IFF_DONT_BRIDGE) {
- netdev_info(dev, "This device does not support bridging.\n");
+ NL_SET_ERR_MSG_MOD(extack,
+ "This device does not support bridging.");
return -EOPNOTSUPP;
}
@@ -101,21 +119,26 @@
return 0;
}
-
/* Setup device to be added to the HSR bridge. */
-static int hsr_portdev_setup(struct net_device *dev, struct hsr_port *port)
+static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
+ struct hsr_port *port,
+ struct netlink_ext_ack *extack)
+
{
+ struct net_device *hsr_dev;
+ struct hsr_port *master;
int res;
- dev_hold(dev);
res = dev_set_promiscuity(dev, 1);
if (res)
- goto fail_promiscuity;
+ return res;
- /* FIXME:
- * What does net device "adjacency" mean? Should we do
- * res = netdev_master_upper_dev_link(port->dev, port->hsr->dev); ?
- */
+ master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
+ hsr_dev = master->dev;
+
+ res = netdev_upper_dev_link(dev, hsr_dev, extack);
+ if (res)
+ goto fail_upper_dev_link;
res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
if (res)
@@ -125,31 +148,30 @@
return 0;
fail_rx_handler:
+ netdev_upper_dev_unlink(dev, hsr_dev);
+fail_upper_dev_link:
dev_set_promiscuity(dev, -1);
-fail_promiscuity:
- dev_put(dev);
-
return res;
}
int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
- enum hsr_port_type type)
+ enum hsr_port_type type, struct netlink_ext_ack *extack)
{
struct hsr_port *port, *master;
int res;
if (type != HSR_PT_MASTER) {
- res = hsr_check_dev_ok(dev);
+ res = hsr_check_dev_ok(dev, extack);
if (res)
return res;
}
port = hsr_port_get_hsr(hsr, type);
- if (port != NULL)
+ if (port)
return -EBUSY; /* This port already exists */
port = kzalloc(sizeof(*port), GFP_KERNEL);
- if (port == NULL)
+ if (!port)
return -ENOMEM;
port->hsr = hsr;
@@ -157,7 +179,7 @@
port->type = type;
if (type != HSR_PT_MASTER) {
- res = hsr_portdev_setup(dev, port);
+ res = hsr_portdev_setup(hsr, dev, port, extack);
if (res)
goto fail_dev_setup;
}
@@ -186,20 +208,14 @@
list_del_rcu(&port->port_list);
if (port != master) {
- if (master != NULL) {
- netdev_update_features(master->dev);
- dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
- }
+ netdev_update_features(master->dev);
+ dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
netdev_rx_handler_unregister(port->dev);
dev_set_promiscuity(port->dev, -1);
+ netdev_upper_dev_unlink(port->dev, master->dev);
}
-
- /* FIXME?
- * netdev_upper_dev_unlink(port->dev, port->hsr->dev);
- */
synchronize_rcu();
- if (port != master)
- dev_put(port->dev);
+ kfree(port);
}
--
Gitblit v1.6.2