From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/net/bridge/br_if.c | 79 ++++++++++++++++++++++++++++-----------
1 files changed, 56 insertions(+), 23 deletions(-)
diff --git a/kernel/net/bridge/br_if.c b/kernel/net/bridge/br_if.c
index b5fb2b6..e35488f 100644
--- a/kernel/net/bridge/br_if.c
+++ b/kernel/net/bridge/br_if.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Userspace interface
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
@@ -161,8 +157,9 @@
* This lets us disable promiscuous mode and write
* this config to hw.
*/
- if (br->auto_cnt == 0 ||
- (br->auto_cnt == 1 && br_auto_port(p)))
+ if ((p->dev->priv_flags & IFF_UNICAST_FLT) &&
+ (br->auto_cnt == 0 ||
+ (br->auto_cnt == 1 && br_auto_port(p))))
br_port_clear_promisc(p);
else
br_port_set_promisc(p);
@@ -179,7 +176,7 @@
ASSERT_RTNL();
if (backup_dev) {
- if (!br_port_exists(backup_dev))
+ if (!netif_is_bridge_port(backup_dev))
return -ENOENT;
backup_p = br_port_get_rtnl(backup_dev);
@@ -337,6 +334,8 @@
br_stp_disable_port(p);
spin_unlock_bh(&br->lock);
+ br_mrp_port_del(br, p);
+
br_ifinfo_notify(RTM_DELLINK, NULL, p);
list_del_rcu(&p->list);
@@ -394,8 +393,7 @@
struct net_bridge_port *p;
unsigned long *inuse;
- inuse = kcalloc(BITS_TO_LONGS(BR_MAX_PORTS), sizeof(unsigned long),
- GFP_KERNEL);
+ inuse = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL);
if (!inuse)
return -ENOMEM;
@@ -404,7 +402,7 @@
set_bit(p->port_no, inuse);
}
index = find_first_zero_bit(inuse, BR_MAX_PORTS);
- kfree(inuse);
+ bitmap_free(inuse);
return (index >= BR_MAX_PORTS) ? -EXFULL : index;
}
@@ -509,14 +507,14 @@
ASSERT_RTNL();
/* if the bridge MTU was manually configured don't mess with it */
- if (br->mtu_set_by_user)
+ if (br_opt_get(br, BROPT_MTU_SET_BY_USER))
return;
/* change to the minimum MTU and clear the flag which was set by
* the bridge ndo_change_mtu callback
*/
dev_set_mtu(br->dev, br_mtu_min(br));
- br->mtu_set_by_user = false;
+ br_opt_toggle(br, BROPT_MTU_SET_BY_USER, false);
}
static void br_set_gso_limits(struct net_bridge *br)
@@ -566,17 +564,31 @@
unsigned br_hr, dev_hr;
bool changed_addr, fdb_synced = false;
- /* Don't allow bridging non-ethernet like devices, or DSA-enabled
- * master network devices since the bridge layer rx_handler prevents
- * the DSA fake ethertype handler to be invoked, so we do not strip off
- * the DSA switch tag protocol header and the bridge layer just return
- * RX_HANDLER_CONSUMED, stopping RX processing for these frames.
- */
+ /* Don't allow bridging non-ethernet like devices. */
if ((dev->flags & IFF_LOOPBACK) ||
dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
- !is_valid_ether_addr(dev->dev_addr) ||
- netdev_uses_dsa(dev))
+ !is_valid_ether_addr(dev->dev_addr))
return -EINVAL;
+
+ /* Also don't allow bridging of net devices that are DSA masters, since
+ * the bridge layer rx_handler prevents the DSA fake ethertype handler
+ * to be invoked, so we don't get the chance to strip off and parse the
+ * DSA switch tag protocol header (the bridge layer just returns
+ * RX_HANDLER_CONSUMED, stopping RX processing for these frames).
+ * The only case where that would not be an issue is when bridging can
+ * already be offloaded, such as when the DSA master is itself a DSA
+ * or plain switchdev port, and is bridged only with other ports from
+ * the same hardware device.
+ */
+ if (netdev_uses_dsa(dev)) {
+ list_for_each_entry(p, &br->port_list, list) {
+ if (!netdev_port_same_parent_id(dev, p->dev)) {
+ NL_SET_ERR_MSG(extack,
+ "Cannot do software bridging with a DSA master");
+ return -EINVAL;
+ }
+ }
+ }
/* No bridging of bridges */
if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) {
@@ -622,7 +634,7 @@
if (err)
goto err3;
- err = netdev_rx_handler_register(dev, br_handle_frame, p);
+ err = netdev_rx_handler_register(dev, br_get_rx_handler(dev), p);
if (err)
goto err4;
@@ -667,7 +679,16 @@
if (br_fdb_insert(br, p, dev->dev_addr, 0))
netdev_err(dev, "failed insert local address bridge forwarding table\n");
- err = nbp_vlan_init(p);
+ if (br->dev->addr_assign_type != NET_ADDR_SET) {
+ /* Ask for permission to use this MAC address now, even if we
+ * don't end up choosing it below.
+ */
+ err = dev_pre_changeaddr_notify(br->dev, dev->dev_addr, extack);
+ if (err)
+ goto err7;
+ }
+
+ err = nbp_vlan_init(p, extack);
if (err) {
netdev_err(dev, "failed to initialize vlan filtering on this port\n");
goto err7;
@@ -758,3 +779,15 @@
if (mask & BR_NEIGH_SUPPRESS)
br_recalculate_neigh_suppress_enabled(br);
}
+
+bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag)
+{
+ struct net_bridge_port *p;
+
+ p = br_port_get_rtnl_rcu(dev);
+ if (!p)
+ return false;
+
+ return p->flags & flag;
+}
+EXPORT_SYMBOL_GPL(br_port_flag_is_set);
--
Gitblit v1.6.2