From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 130 ++++++++++++++++++++++++++++++++++++++-----
1 files changed, 115 insertions(+), 15 deletions(-)
diff --git a/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index bd28def..fe1e4c4 100644
--- a/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1,14 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
*
* Register definitions taken from original Realtek rtl8723au driver
*/
@@ -635,7 +627,7 @@
u32 reserved4;
u32 reserved5;
- u8 data[0];
+ u8 data[];
};
/*
@@ -1136,6 +1128,15 @@
BT_MP_OP_ENABLE_CFO_TRACKING = 0x24,
};
+enum rtl8xxxu_bw_mode {
+ RTL8XXXU_CHANNEL_WIDTH_20 = 0,
+ RTL8XXXU_CHANNEL_WIDTH_40 = 1,
+ RTL8XXXU_CHANNEL_WIDTH_80 = 2,
+ RTL8XXXU_CHANNEL_WIDTH_160 = 3,
+ RTL8XXXU_CHANNEL_WIDTH_80_80 = 4,
+ RTL8XXXU_CHANNEL_WIDTH_MAX = 5,
+};
+
struct rtl8723bu_c2h {
u8 id;
u8 seq;
@@ -1177,18 +1178,100 @@
} __packed bt_info;
struct {
u8 rate:7;
- u8 dummy0_0:1;
+ u8 sgi:1;
u8 macid;
u8 ldpc:1;
u8 txbf:1;
u8 noisy_state:1;
u8 dummy2_0:5;
u8 dummy3_0;
+ u8 dummy4_0;
+ u8 dummy5_0;
+ u8 bw;
} __packed ra_report;
};
-};
+} __packed;
struct rtl8xxxu_fileops;
+
+/*mlme related.*/
+enum wireless_mode {
+ WIRELESS_MODE_UNKNOWN = 0,
+ /* Sub-Element */
+ WIRELESS_MODE_B = BIT(0),
+ WIRELESS_MODE_G = BIT(1),
+ WIRELESS_MODE_A = BIT(2),
+ WIRELESS_MODE_N_24G = BIT(3),
+ WIRELESS_MODE_N_5G = BIT(4),
+ WIRELESS_AUTO = BIT(5),
+ WIRELESS_MODE_AC = BIT(6),
+ WIRELESS_MODE_MAX = 0x7F,
+};
+
+/* from rtlwifi/wifi.h */
+enum ratr_table_mode_new {
+ RATEID_IDX_BGN_40M_2SS = 0,
+ RATEID_IDX_BGN_40M_1SS = 1,
+ RATEID_IDX_BGN_20M_2SS_BN = 2,
+ RATEID_IDX_BGN_20M_1SS_BN = 3,
+ RATEID_IDX_GN_N2SS = 4,
+ RATEID_IDX_GN_N1SS = 5,
+ RATEID_IDX_BG = 6,
+ RATEID_IDX_G = 7,
+ RATEID_IDX_B = 8,
+ RATEID_IDX_VHT_2SS = 9,
+ RATEID_IDX_VHT_1SS = 10,
+ RATEID_IDX_MIX1 = 11,
+ RATEID_IDX_MIX2 = 12,
+ RATEID_IDX_VHT_3SS = 13,
+ RATEID_IDX_BGN_3SS = 14,
+};
+
+#define BT_INFO_8723B_1ANT_B_FTP BIT(7)
+#define BT_INFO_8723B_1ANT_B_A2DP BIT(6)
+#define BT_INFO_8723B_1ANT_B_HID BIT(5)
+#define BT_INFO_8723B_1ANT_B_SCO_BUSY BIT(4)
+#define BT_INFO_8723B_1ANT_B_ACL_BUSY BIT(3)
+#define BT_INFO_8723B_1ANT_B_INQ_PAGE BIT(2)
+#define BT_INFO_8723B_1ANT_B_SCO_ESCO BIT(1)
+#define BT_INFO_8723B_1ANT_B_CONNECTION BIT(0)
+
+enum _BT_8723B_1ANT_STATUS {
+ BT_8723B_1ANT_STATUS_NON_CONNECTED_IDLE = 0x0,
+ BT_8723B_1ANT_STATUS_CONNECTED_IDLE = 0x1,
+ BT_8723B_1ANT_STATUS_INQ_PAGE = 0x2,
+ BT_8723B_1ANT_STATUS_ACL_BUSY = 0x3,
+ BT_8723B_1ANT_STATUS_SCO_BUSY = 0x4,
+ BT_8723B_1ANT_STATUS_ACL_SCO_BUSY = 0x5,
+ BT_8723B_1ANT_STATUS_MAX
+};
+
+struct rtl8xxxu_btcoex {
+ u8 bt_status;
+ bool bt_busy;
+ bool has_sco;
+ bool has_a2dp;
+ bool has_hid;
+ bool has_pan;
+ bool hid_only;
+ bool a2dp_only;
+ bool c2h_bt_inquiry;
+};
+
+#define RTL8XXXU_RATR_STA_INIT 0
+#define RTL8XXXU_RATR_STA_HIGH 1
+#define RTL8XXXU_RATR_STA_MID 2
+#define RTL8XXXU_RATR_STA_LOW 3
+
+#define RTL8XXXU_NOISE_FLOOR_MIN -100
+#define RTL8XXXU_SNR_THRESH_HIGH 50
+#define RTL8XXXU_SNR_THRESH_LOW 20
+
+struct rtl8xxxu_ra_report {
+ struct rate_info txrate;
+ u32 bit_rate;
+ u8 desc_rate;
+};
struct rtl8xxxu_priv {
struct ieee80211_hw *hw;
@@ -1263,6 +1346,7 @@
u32 rege9c;
u32 regeb4;
u32 regebc;
+ u32 regrcr;
int next_mbox;
int nr_out_eps;
@@ -1294,6 +1378,20 @@
u8 pi_enabled:1;
u8 no_pape:1;
u8 int_buf[USB_INTR_CONTENT_LENGTH];
+ u8 rssi_level;
+ DECLARE_BITMAP(tx_aggr_started, IEEE80211_NUM_TIDS);
+ DECLARE_BITMAP(tid_tx_operational, IEEE80211_NUM_TIDS);
+ /*
+ * Only one virtual interface permitted because only STA mode
+ * is supported and no iface_combinations are provided.
+ */
+ struct ieee80211_vif *vif;
+ struct delayed_work ra_watchdog;
+ struct work_struct c2hcmd_work;
+ struct sk_buff_head c2hcmd_queue;
+ spinlock_t c2hcmd_lock;
+ struct rtl8xxxu_btcoex bt_coex;
+ struct rtl8xxxu_ra_report ra_report;
};
struct rtl8xxxu_rx_urb {
@@ -1329,7 +1427,7 @@
void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel,
bool ht40);
void (*update_rate_mask) (struct rtl8xxxu_priv *priv,
- u32 ramask, int sgi);
+ u32 ramask, u8 rateid, int sgi);
void (*report_connect) (struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
@@ -1415,9 +1513,9 @@
void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv);
void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv);
void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
- u32 ramask, int sgi);
+ u32 ramask, u8 rateid, int sgi);
void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
- u32 ramask, int sgi);
+ u32 ramask, u8 rateid, int sgi);
void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
@@ -1441,6 +1539,8 @@
struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
bool short_preamble, bool ampdu_enable,
u32 rts_rate);
+void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
+ u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5);
extern struct rtl8xxxu_fileops rtl8192cu_fops;
extern struct rtl8xxxu_fileops rtl8192eu_fops;
--
Gitblit v1.6.2