From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 31 +++++++++++++++----------------
1 files changed, 15 insertions(+), 16 deletions(-)
diff --git a/kernel/drivers/net/wireless/ralink/rt2x00/rt2800soc.c b/kernel/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
index a502816..bbfe142 100644
--- a/kernel/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/kernel/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
* Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
@@ -7,19 +8,6 @@
* Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
* Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
* <http://rt2x00.serialmonkey.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
/* Module: rt2800soc
@@ -51,9 +39,16 @@
static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
{
+ u32 reg;
+
rt2800_disable_radio(rt2x00dev);
rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+ reg = 0;
+ if (rt2x00_rt(rt2x00dev, RT3883))
+ rt2x00_set_field32(®, TX_PIN_CFG_RFTR_EN, 1);
+
+ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg);
}
static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
@@ -161,6 +156,7 @@
.get_survey = rt2800_get_survey,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
+ .reconfig_complete = rt2x00mac_reconfig_complete,
};
static const struct rt2800_ops rt2800soc_rt2800_ops = {
@@ -176,6 +172,7 @@
.drv_write_firmware = rt2800soc_write_firmware,
.drv_init_registers = rt2800mmio_init_registers,
.drv_get_txwi = rt2800mmio_get_txwi,
+ .drv_get_dma_done = rt2800mmio_get_dma_done,
};
static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
@@ -185,7 +182,7 @@
.tbtt_tasklet = rt2800mmio_tbtt_tasklet,
.rxdone_tasklet = rt2800mmio_rxdone_tasklet,
.autowake_tasklet = rt2800mmio_autowake_tasklet,
- .probe_hw = rt2800_probe_hw,
+ .probe_hw = rt2800mmio_probe_hw,
.get_firmware_name = rt2800soc_get_firmware_name,
.check_firmware = rt2800soc_check_firmware,
.load_firmware = rt2800soc_load_firmware,
@@ -200,10 +197,11 @@
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800mmio_start_queue,
.kick_queue = rt2800mmio_kick_queue,
.stop_queue = rt2800mmio_stop_queue,
- .flush_queue = rt2x00mmio_flush_queue,
+ .flush_queue = rt2800mmio_flush_queue,
.write_tx_desc = rt2800mmio_write_tx_desc,
.write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
@@ -216,6 +214,7 @@
.config_erp = rt2800_config_erp,
.config_ant = rt2800_config_ant,
.config = rt2800_config,
+ .pre_reset_hw = rt2800_pre_reset_hw,
};
static const struct rt2x00_ops rt2800soc_ops = {
--
Gitblit v1.6.2