From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 24 ++++++++----------------
1 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.c b/kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
index 71b1aff..9a33baa 100644
--- a/kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
+++ b/kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
@@ -9,18 +10,6 @@
Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
<http://rt2x00.serialmonkey.com>
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
/*
@@ -322,6 +311,7 @@
.get_survey = rt2800_get_survey,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
+ .reconfig_complete = rt2x00mac_reconfig_complete,
};
static const struct rt2800_ops rt2800pci_rt2800_ops = {
@@ -337,6 +327,7 @@
.drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800mmio_init_registers,
.drv_get_txwi = rt2800mmio_get_txwi,
+ .drv_get_dma_done = rt2800mmio_get_dma_done,
};
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
@@ -346,7 +337,7 @@
.tbtt_tasklet = rt2800mmio_tbtt_tasklet,
.rxdone_tasklet = rt2800mmio_rxdone_tasklet,
.autowake_tasklet = rt2800mmio_autowake_tasklet,
- .probe_hw = rt2800_probe_hw,
+ .probe_hw = rt2800mmio_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800_check_firmware,
.load_firmware = rt2800_load_firmware,
@@ -361,10 +352,11 @@
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800mmio_start_queue,
.kick_queue = rt2800mmio_kick_queue,
.stop_queue = rt2800mmio_stop_queue,
- .flush_queue = rt2x00mmio_flush_queue,
+ .flush_queue = rt2800mmio_flush_queue,
.write_tx_desc = rt2800mmio_write_tx_desc,
.write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
@@ -377,6 +369,7 @@
.config_erp = rt2800_config_erp,
.config_ant = rt2800_config_ant,
.config = rt2800_config,
+ .pre_reset_hw = rt2800_pre_reset_hw,
};
static const struct rt2x00_ops rt2800pci_ops = {
@@ -462,8 +455,7 @@
.id_table = rt2800pci_device_table,
.probe = rt2800pci_probe,
.remove = rt2x00pci_remove,
- .suspend = rt2x00pci_suspend,
- .resume = rt2x00pci_resume,
+ .driver.pm = &rt2x00pci_pm_ops,
};
module_pci_driver(rt2800pci_driver);
--
Gitblit v1.6.2