From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/quantenna/qtnfmac/qlink.h | 708 ++++++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 562 insertions(+), 146 deletions(-)
diff --git a/kernel/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/kernel/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index c5ae4ea..2dda4c5 100644
--- a/kernel/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/kernel/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -1,25 +1,25 @@
-/*
- * Copyright (c) 2015-2016 Quantenna Communications, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2015-2016 Quantenna Communications. All rights reserved. */
#ifndef _QTN_QLINK_H_
#define _QTN_QLINK_H_
#include <linux/ieee80211.h>
-#define QLINK_PROTO_VER 11
+#define QLINK_PROTO_VER_MAJOR_M 0xFFFF
+#define QLINK_PROTO_VER_MAJOR_S 16
+#define QLINK_PROTO_VER_MINOR_M 0xFFFF
+#define QLINK_VER_MINOR(_ver) ((_ver) & QLINK_PROTO_VER_MINOR_M)
+#define QLINK_VER_MAJOR(_ver) \
+ (((_ver) >> QLINK_PROTO_VER_MAJOR_S) & QLINK_PROTO_VER_MAJOR_M)
+#define QLINK_VER(_maj, _min) (((_maj) << QLINK_PROTO_VER_MAJOR_S) | (_min))
+
+#define QLINK_PROTO_VER_MAJOR 18
+#define QLINK_PROTO_VER_MINOR 1
+#define QLINK_PROTO_VER \
+ QLINK_VER(QLINK_PROTO_VER_MAJOR, QLINK_PROTO_VER_MINOR)
+
+#define QLINK_ALIGN 4
#define QLINK_MACID_RSVD 0xFF
#define QLINK_VIFID_RSVD 0xFF
@@ -72,14 +72,27 @@
* @QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR: device supports MAC Address
* Randomization in probe requests.
* @QLINK_HW_CAPAB_OBSS_SCAN: device can perform OBSS scanning.
+ * @QLINK_HW_CAPAB_HW_BRIDGE: device has hardware switch capabilities.
*/
enum qlink_hw_capab {
- QLINK_HW_CAPAB_REG_UPDATE = BIT(0),
- QLINK_HW_CAPAB_STA_INACT_TIMEOUT = BIT(1),
- QLINK_HW_CAPAB_DFS_OFFLOAD = BIT(2),
- QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR = BIT(3),
- QLINK_HW_CAPAB_PWR_MGMT = BIT(4),
- QLINK_HW_CAPAB_OBSS_SCAN = BIT(5),
+ QLINK_HW_CAPAB_REG_UPDATE = 0,
+ QLINK_HW_CAPAB_STA_INACT_TIMEOUT,
+ QLINK_HW_CAPAB_DFS_OFFLOAD,
+ QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR,
+ QLINK_HW_CAPAB_PWR_MGMT,
+ QLINK_HW_CAPAB_OBSS_SCAN,
+ QLINK_HW_CAPAB_SCAN_DWELL,
+ QLINK_HW_CAPAB_SAE,
+ QLINK_HW_CAPAB_HW_BRIDGE,
+ QLINK_HW_CAPAB_NUM
+};
+
+/**
+ * enum qlink_driver_capab - host driver capabilities.
+ *
+ */
+enum qlink_driver_capab {
+ QLINK_DRV_CAPAB_NUM = 0
};
enum qlink_iface_type {
@@ -104,7 +117,8 @@
__le16 if_type;
__le16 vlanid;
u8 mac_addr[ETH_ALEN];
- u8 rsvd[2];
+ u8 use4addr;
+ u8 rsvd[1];
} __packed;
enum qlink_sta_flags {
@@ -172,7 +186,7 @@
__le16 center_freq1;
__le16 center_freq2;
u8 width;
- u8 rsvd;
+ u8 rsvd[3];
} __packed;
#define QLINK_MAX_NR_CIPHER_SUITES 5
@@ -204,6 +218,45 @@
__le32 value;
} __packed;
+/**
+ * enum qlink_sr_ctrl_flags - control flags for spatial reuse parameter set
+ *
+ * @QLINK_SR_PSR_DISALLOWED: indicates whether or not PSR-based spatial reuse
+ * transmissions are allowed for STAs associated with the AP
+ * @QLINK_SR_NON_SRG_OBSS_PD_SR_DISALLOWED: indicates whether or not
+ * Non-SRG OBSS PD spatial reuse transmissions are allowed for STAs associated
+ * with the AP
+ * @NON_SRG_OFFSET_PRESENT: indicates whether or not Non-SRG OBSS PD Max offset
+ * field is valid in the element
+ * @QLINK_SR_SRG_INFORMATION_PRESENT: indicates whether or not SRG OBSS PD
+ * Min/Max offset fields ore valid in the element
+ */
+enum qlink_sr_ctrl_flags {
+ QLINK_SR_PSR_DISALLOWED = BIT(0),
+ QLINK_SR_NON_SRG_OBSS_PD_SR_DISALLOWED = BIT(1),
+ QLINK_SR_NON_SRG_OFFSET_PRESENT = BIT(2),
+ QLINK_SR_SRG_INFORMATION_PRESENT = BIT(3),
+};
+
+/**
+ * struct qlink_sr_params - spatial reuse parameters
+ *
+ * @sr_control: spatial reuse control field; flags contained in this field are
+ * defined in @qlink_sr_ctrl_flags
+ * @non_srg_obss_pd_max: added to -82 dBm to generate the value of the
+ * Non-SRG OBSS PD Max parameter
+ * @srg_obss_pd_min_offset: added to -82 dBm to generate the value of the
+ * SRG OBSS PD Min parameter
+ * @srg_obss_pd_max_offset: added to -82 dBm to generate the value of the
+ * SRG PBSS PD Max parameter
+ */
+struct qlink_sr_params {
+ u8 sr_control;
+ u8 non_srg_obss_pd_max;
+ u8 srg_obss_pd_min_offset;
+ u8 srg_obss_pd_max_offset;
+} __packed;
+
/* QLINK Command messages related definitions
*/
@@ -216,6 +269,8 @@
* execution status (one of &enum qlink_cmd_result). Reply message
* may also contain data payload specific to the command type.
*
+ * @QLINK_CMD_SEND_FRAME: send specified frame over the air; firmware will
+ * encapsulate 802.3 packet into 802.11 frame automatically.
* @QLINK_CMD_BAND_INFO_GET: for the specified MAC and specified band, get
* the band's description including number of operational channels and
* info on each channel, HT/VHT capabilities, supported rates etc.
@@ -225,14 +280,17 @@
* command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE
* capability.
* @QLINK_CMD_START_CAC: start radar detection procedure on a specified channel.
+ * @QLINK_CMD_TXPWR: get or set current channel transmit power for
+ * the specified MAC.
+ * @QLINK_CMD_NDEV_EVENT: signalizes changes made with a corresponding network
+ * device.
*/
enum qlink_cmd_type {
QLINK_CMD_FW_INIT = 0x0001,
QLINK_CMD_FW_DEINIT = 0x0002,
QLINK_CMD_REGISTER_MGMT = 0x0003,
- QLINK_CMD_SEND_MGMT_FRAME = 0x0004,
+ QLINK_CMD_SEND_FRAME = 0x0004,
QLINK_CMD_MGMT_SET_APPIE = 0x0005,
- QLINK_CMD_PHY_PARAMS_GET = 0x0011,
QLINK_CMD_PHY_PARAMS_SET = 0x0012,
QLINK_CMD_GET_HW_INFO = 0x0013,
QLINK_CMD_MAC_INFO = 0x0014,
@@ -257,10 +315,14 @@
QLINK_CMD_DEL_STA = 0x0052,
QLINK_CMD_SCAN = 0x0053,
QLINK_CMD_CHAN_STATS = 0x0054,
+ QLINK_CMD_NDEV_EVENT = 0x0055,
QLINK_CMD_CONNECT = 0x0060,
QLINK_CMD_DISCONNECT = 0x0061,
QLINK_CMD_PM_SET = 0x0062,
QLINK_CMD_WOWLAN_SET = 0x0063,
+ QLINK_CMD_EXTERNAL_AUTH = 0x0066,
+ QLINK_CMD_TXPWR = 0x0067,
+ QLINK_CMD_UPDATE_OWE = 0x0068,
};
/**
@@ -281,9 +343,26 @@
struct qlink_msg_header mhdr;
__le16 cmd_id;
__le16 seq_num;
- u8 rsvd[2];
u8 macid;
u8 vifid;
+ u8 rsvd[2];
+} __packed;
+
+/**
+ * struct qlink_cmd_init_fw - data for QLINK_CMD_FW_INIT
+ *
+ * Initialize firmware based on specified host configuration. This is the first
+ * command sent to wifi card and it's fixed part should never be changed, any
+ * additions must be done by appending TLVs.
+ * If wifi card can not operate with a specified parameters it will return
+ * error.
+ *
+ * @qlink_proto_ver: QLINK protocol version used by host driver.
+ */
+struct qlink_cmd_init_fw {
+ struct qlink_cmd chdr;
+ __le32 qlink_proto_ver;
+ u8 var_info[];
} __packed;
/**
@@ -328,29 +407,34 @@
struct qlink_cmd chdr;
__le16 frame_type;
u8 do_register;
+ u8 rsvd[1];
} __packed;
-enum qlink_mgmt_frame_tx_flags {
- QLINK_MGMT_FRAME_TX_FLAG_NONE = 0,
- QLINK_MGMT_FRAME_TX_FLAG_OFFCHAN = BIT(0),
- QLINK_MGMT_FRAME_TX_FLAG_NO_CCK = BIT(1),
- QLINK_MGMT_FRAME_TX_FLAG_ACK_NOWAIT = BIT(2),
+/**
+ * @QLINK_FRAME_TX_FLAG_8023: frame has a 802.3 header; if not set, frame
+ * is a 802.11 encapsulated.
+ */
+enum qlink_frame_tx_flags {
+ QLINK_FRAME_TX_FLAG_OFFCHAN = BIT(0),
+ QLINK_FRAME_TX_FLAG_NO_CCK = BIT(1),
+ QLINK_FRAME_TX_FLAG_ACK_NOWAIT = BIT(2),
+ QLINK_FRAME_TX_FLAG_8023 = BIT(3),
};
/**
- * struct qlink_cmd_mgmt_frame_tx - data for QLINK_CMD_SEND_MGMT_FRAME command
+ * struct qlink_cmd_frame_tx - data for QLINK_CMD_SEND_FRAME command
*
* @cookie: opaque request identifier.
* @freq: Frequency to use for frame transmission.
- * @flags: Transmission flags, one of &enum qlink_mgmt_frame_tx_flags.
+ * @flags: Transmission flags, one of &enum qlink_frame_tx_flags.
* @frame_data: frame to transmit.
*/
-struct qlink_cmd_mgmt_frame_tx {
+struct qlink_cmd_frame_tx {
struct qlink_cmd chdr;
__le32 cookie;
__le16 freq;
__le16 flags;
- u8 frame_data[0];
+ u8 frame_data[];
} __packed;
/**
@@ -361,6 +445,7 @@
struct qlink_cmd_get_sta_info {
struct qlink_cmd chdr;
u8 sta_addr[ETH_ALEN];
+ u8 rsvd[2];
} __packed;
/**
@@ -380,7 +465,8 @@
u8 addr[ETH_ALEN];
__le32 cipher;
__le16 vlanid;
- u8 key_data[0];
+ u8 rsvd[2];
+ u8 key_data[];
} __packed;
/**
@@ -409,6 +495,7 @@
u8 key_index;
u8 unicast;
u8 multicast;
+ u8 rsvd[1];
} __packed;
/**
@@ -419,6 +506,7 @@
struct qlink_cmd_set_def_mgmt_key {
struct qlink_cmd chdr;
u8 key_index;
+ u8 rsvd[3];
} __packed;
/**
@@ -435,6 +523,7 @@
__le16 if_type;
__le16 vlanid;
u8 sta_addr[ETH_ALEN];
+ u8 rsvd[2];
} __packed;
/**
@@ -445,8 +534,9 @@
struct qlink_cmd_del_sta {
struct qlink_cmd chdr;
__le16 reason_code;
- u8 subtype;
u8 sta_addr[ETH_ALEN];
+ u8 subtype;
+ u8 rsvd[3];
} __packed;
enum qlink_sta_connect_flags {
@@ -488,7 +578,21 @@
u8 mfp;
u8 pbss;
u8 rsvd[2];
- u8 payload[0];
+ u8 payload[];
+} __packed;
+
+/**
+ * struct qlink_cmd_external_auth - data for QLINK_CMD_EXTERNAL_AUTH command
+ *
+ * @bssid: BSSID of the BSS to connect to
+ * @status: authentication status code
+ * @payload: variable portion of connection request.
+ */
+struct qlink_cmd_external_auth {
+ struct qlink_cmd chdr;
+ u8 peer[ETH_ALEN];
+ __le16 status;
+ u8 payload[];
} __packed;
/**
@@ -499,6 +603,7 @@
struct qlink_cmd_disconnect {
struct qlink_cmd chdr;
__le16 reason;
+ u8 rsvd[2];
} __packed;
/**
@@ -510,6 +615,7 @@
struct qlink_cmd_updown {
struct qlink_cmd chdr;
u8 if_up;
+ u8 rsvd[3];
} __packed;
/**
@@ -533,16 +639,17 @@
struct qlink_cmd_band_info_get {
struct qlink_cmd chdr;
u8 band;
+ u8 rsvd[3];
} __packed;
/**
* struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command
*
- * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
+ * @channel_freq: channel center frequency
*/
struct qlink_cmd_get_chan_stats {
struct qlink_cmd chdr;
- __le16 channel;
+ __le32 channel_freq;
} __packed;
/**
@@ -575,28 +682,53 @@
* @initiator: which entity sent the request, one of &enum qlink_reg_initiator.
* @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one
* of &enum qlink_user_reg_hint_type.
+ * @num_channels: number of &struct qlink_tlv_channel in a variable portion of a
+ * payload.
+ * @dfs_region: one of &enum qlink_dfs_regions.
+ * @slave_radar: whether slave device should enable radar detection.
+ * @dfs_offload: enable or disable DFS offload to firmware.
+ * @info: variable portion of regulatory notifier callback.
*/
struct qlink_cmd_reg_notify {
struct qlink_cmd chdr;
u8 alpha2[2];
u8 initiator;
u8 user_reg_hint_type;
+ u8 num_channels;
+ u8 dfs_region;
+ u8 slave_radar;
+ u8 dfs_offload;
+ u8 info[];
} __packed;
+
+/**
+ * enum qlink_chan_sw_flags - channel switch control flags
+ *
+ * @QLINK_CHAN_SW_RADAR_REQUIRED: whether radar detection is required on a new
+ * channel.
+ * @QLINK_CHAN_SW_BLOCK_TX: whether transmissions should be blocked while
+ * changing a channel.
+ */
+enum qlink_chan_sw_flags {
+ QLINK_CHAN_SW_RADAR_REQUIRED = BIT(0),
+ QLINK_CHAN_SW_BLOCK_TX = BIT(1),
+};
/**
* struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command
*
- * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
- * @radar_required: whether radar detection is required on the new channel
- * @block_tx: whether transmissions should be blocked while changing
+ * @channel: channel to switch to.
+ * @flags: flags to control channel switch, bitmap of &enum qlink_chan_sw_flags.
* @beacon_count: number of beacons until switch
*/
struct qlink_cmd_chan_switch {
struct qlink_cmd chdr;
- __le16 channel;
- u8 radar_required;
- u8 block_tx;
+ struct qlink_chandef channel;
+ __le64 flags;
+ __le32 n_counter_offsets_beacon;
+ __le32 n_counter_offsets_presp;
u8 beacon_count;
+ u8 rsvd[3];
} __packed;
/**
@@ -621,6 +753,8 @@
* @ht_required: stations must support HT
* @vht_required: stations must support VHT
* @aen: encryption info
+ * @sr_params: spatial reuse parameters
+ * @twt_responder: enable Target Wake Time
* @info: variable configurations
*/
struct qlink_cmd_start_ap {
@@ -636,7 +770,10 @@
u8 ht_required;
u8 vht_required;
struct qlink_auth_encr aen;
- u8 info[0];
+ struct qlink_sr_params sr_params;
+ u8 twt_responder;
+ u8 rsvd[3];
+ u8 info[];
} __packed;
/**
@@ -670,7 +807,7 @@
struct qlink_acl_data {
__le32 policy;
__le32 num_entries;
- struct qlink_mac_address mac_addrs[0];
+ struct qlink_mac_address mac_addrs[];
} __packed;
/**
@@ -695,6 +832,33 @@
struct qlink_cmd chdr;
__le32 pm_standby_timer;
u8 pm_mode;
+ u8 rsvd[3];
+} __packed;
+
+/**
+ * enum qlink_txpwr_op - transmit power operation type
+ * @QLINK_TXPWR_SET: set tx power
+ * @QLINK_TXPWR_GET: get current tx power setting
+ */
+enum qlink_txpwr_op {
+ QLINK_TXPWR_SET,
+ QLINK_TXPWR_GET
+};
+
+/**
+ * struct qlink_cmd_txpwr - get or set current transmit power
+ *
+ * @txpwr: new transmit power setting, in mBm
+ * @txpwr_setting: transmit power setting type, one of
+ * &enum nl80211_tx_power_setting
+ * @op_type: type of operation, one of &enum qlink_txpwr_op
+ */
+struct qlink_cmd_txpwr {
+ struct qlink_cmd chdr;
+ __le32 txpwr;
+ u8 txpwr_setting;
+ u8 op_type;
+ u8 rsvd[2];
} __packed;
/**
@@ -718,7 +882,97 @@
struct qlink_cmd_wowlan_set {
struct qlink_cmd chdr;
__le32 triggers;
- u8 data[0];
+ u8 data[];
+} __packed;
+
+enum qlink_ndev_event_type {
+ QLINK_NDEV_EVENT_CHANGEUPPER,
+};
+
+/**
+ * struct qlink_cmd_ndev_event - data for QLINK_CMD_NDEV_EVENT command
+ *
+ * @event: type of event, one of &enum qlink_ndev_event_type
+ */
+struct qlink_cmd_ndev_event {
+ struct qlink_cmd chdr;
+ __le16 event;
+ u8 rsvd[2];
+} __packed;
+
+enum qlink_ndev_upper_type {
+ QLINK_NDEV_UPPER_TYPE_NONE,
+ QLINK_NDEV_UPPER_TYPE_BRIDGE,
+};
+
+/**
+ * struct qlink_cmd_ndev_changeupper - data for QLINK_NDEV_EVENT_CHANGEUPPER
+ *
+ * @br_domain: layer 2 broadcast domain ID that ndev is a member of
+ * @upper_type: type of upper device, one of &enum qlink_ndev_upper_type
+ */
+struct qlink_cmd_ndev_changeupper {
+ struct qlink_cmd_ndev_event nehdr;
+ __le64 flags;
+ __le32 br_domain;
+ __le32 netspace_id;
+ __le16 vlanid;
+ u8 upper_type;
+ u8 rsvd[1];
+} __packed;
+
+/**
+ * enum qlink_scan_flags - scan request control flags
+ *
+ * Scan flags are used to control QLINK_CMD_SCAN behavior.
+ *
+ * @QLINK_SCAN_FLAG_FLUSH: flush cache before scanning.
+ */
+enum qlink_scan_flags {
+ QLINK_SCAN_FLAG_FLUSH = BIT(0),
+ QLINK_SCAN_FLAG_DURATION_MANDATORY = BIT(1),
+};
+
+/**
+ * struct qlink_cmd_scan - data for QLINK_CMD_SCAN command
+ *
+ * @flags: scan flags, a bitmap of &enum qlink_scan_flags.
+ * @n_ssids: number of WLAN_EID_SSID TLVs expected in variable portion of the
+ * command.
+ * @n_channels: number of QTN_TLV_ID_CHANNEL TLVs expected in variable payload.
+ * @active_dwell: time spent on a single channel for an active scan.
+ * @passive_dwell: time spent on a single channel for a passive scan.
+ * @sample_duration: total duration of sampling a single channel during a scan
+ * including off-channel dwell time and operating channel time.
+ * @bssid: specific BSSID to scan for or a broadcast BSSID.
+ * @scan_width: channel width to use, one of &enum qlink_channel_width.
+ */
+struct qlink_cmd_scan {
+ struct qlink_cmd chdr;
+ __le64 flags;
+ __le16 n_ssids;
+ __le16 n_channels;
+ __le16 active_dwell;
+ __le16 passive_dwell;
+ __le16 sample_duration;
+ u8 bssid[ETH_ALEN];
+ u8 scan_width;
+ u8 rsvd[3];
+ u8 var_info[];
+} __packed;
+
+/**
+ * struct qlink_cmd_update_owe - data for QLINK_CMD_UPDATE_OWE_INFO command
+ *
+ * @peer: MAC of the peer device for which OWE processing has been completed
+ * @status: OWE external processing status code
+ * @ies: IEs for the peer constructed by the user space
+ */
+struct qlink_cmd_update_owe {
+ struct qlink_cmd chdr;
+ u8 peer[ETH_ALEN];
+ __le16 status;
+ u8 ies[];
} __packed;
/* QLINK Command Responses messages related definitions
@@ -732,6 +986,7 @@
QLINK_CMD_RESULT_EALREADY,
QLINK_CMD_RESULT_EADDRINUSE,
QLINK_CMD_RESULT_EADDRNOTAVAIL,
+ QLINK_CMD_RESULT_EBUSY,
};
/**
@@ -759,35 +1014,13 @@
} __packed;
/**
- * struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command
+ * struct qlink_resp_init_fw - response for QLINK_CMD_FW_INIT
*
- * Data describing specific physical device providing wireless MAC
- * functionality.
- *
- * @dev_mac: MAC address of physical WMAC device (used for first BSS on
- * specified WMAC).
- * @num_tx_chain: Number of transmit chains used by WMAC.
- * @num_rx_chain: Number of receive chains used by WMAC.
- * @vht_cap_mod_mask: mask specifying which VHT capabilities can be altered.
- * @ht_cap_mod_mask: mask specifying which HT capabilities can be altered.
- * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band.
- * @max_ap_assoc_sta: Maximum number of associations supported by WMAC.
- * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar.
- * @var_info: variable-length WMAC info data.
+ * @qlink_proto_ver: QLINK protocol version used by wifi card firmware.
*/
-struct qlink_resp_get_mac_info {
+struct qlink_resp_init_fw {
struct qlink_resp rhdr;
- u8 dev_mac[ETH_ALEN];
- u8 num_tx_chain;
- u8 num_rx_chain;
- struct ieee80211_vht_cap vht_cap_mod_mask;
- struct ieee80211_ht_cap ht_cap_mod_mask;
- __le16 max_ap_assoc_sta;
- __le16 radar_detect_widths;
- __le32 max_acl_mac_addrs;
- u8 bands_cap;
- u8 rsvd[1];
- u8 var_info[0];
+ __le32 qlink_proto_ver;
} __packed;
/**
@@ -803,39 +1036,102 @@
};
/**
+ * struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command
+ *
+ * Data describing specific physical device providing wireless MAC
+ * functionality.
+ *
+ * @dev_mac: MAC address of physical WMAC device (used for first BSS on
+ * specified WMAC).
+ * @num_tx_chain: Number of transmit chains used by WMAC.
+ * @num_rx_chain: Number of receive chains used by WMAC.
+ * @vht_cap_mod_mask: mask specifying which VHT capabilities can be altered.
+ * @ht_cap_mod_mask: mask specifying which HT capabilities can be altered.
+ * @max_scan_ssids: maximum number of SSIDs the device can scan for in any scan.
+ * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band.
+ * @max_ap_assoc_sta: Maximum number of associations supported by WMAC.
+ * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar.
+ * @alpha2: country code ID firmware is configured to.
+ * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
+ * message.
+ * @dfs_region: regulatory DFS region, one of &enum qlink_dfs_regions.
+ * @var_info: variable-length WMAC info data.
+ */
+struct qlink_resp_get_mac_info {
+ struct qlink_resp rhdr;
+ u8 dev_mac[ETH_ALEN];
+ u8 num_tx_chain;
+ u8 num_rx_chain;
+ struct ieee80211_vht_cap vht_cap_mod_mask;
+ struct ieee80211_ht_cap ht_cap_mod_mask;
+
+ __le16 max_ap_assoc_sta;
+ __le32 hw_version;
+ __le32 probe_resp_offload;
+ __le32 bss_select_support;
+ __le16 n_addresses;
+ __le16 radar_detect_widths;
+ __le16 max_remain_on_channel_duration;
+ __le16 max_acl_mac_addrs;
+
+ __le32 frag_threshold;
+ __le32 rts_threshold;
+ u8 retry_short;
+ u8 retry_long;
+ u8 coverage_class;
+
+ u8 max_scan_ssids;
+ u8 max_sched_scan_reqs;
+ u8 max_sched_scan_ssids;
+ u8 max_match_sets;
+ u8 max_adj_channel_rssi_comp;
+
+ __le16 max_scan_ie_len;
+ __le16 max_sched_scan_ie_len;
+ __le32 max_sched_scan_plans;
+ __le32 max_sched_scan_plan_interval;
+ __le32 max_sched_scan_plan_iterations;
+
+ u8 n_cipher_suites;
+ u8 n_akm_suites;
+ u8 max_num_pmkids;
+ u8 num_iftype_ext_capab;
+ u8 extended_capabilities_len;
+ u8 max_data_retry_count;
+ u8 n_iface_combinations;
+ u8 max_num_csa_counters;
+
+ u8 bands_cap;
+ u8 alpha2[2];
+ u8 n_reg_rules;
+ u8 dfs_region;
+ u8 rsvd[3];
+ u8 var_info[];
+} __packed;
+
+/**
* struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
*
* Description of wireless hardware capabilities and features.
*
* @fw_ver: wireless hardware firmware version.
- * @hw_capab: Bitmap of capabilities supported by firmware.
- * @ql_proto_ver: Version of QLINK protocol used by firmware.
* @num_mac: Number of separate physical radio devices provided by hardware.
* @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
* @total_tx_chains: total number of transmit chains used by device.
* @total_rx_chains: total number of receive chains.
- * @alpha2: country code ID firmware is configured to.
- * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
- * message.
- * @dfs_region: regulatory DFS region, one of @enum qlink_dfs_region.
- * @info: variable-length HW info, can contain QTN_TLV_ID_REG_RULE.
+ * @info: variable-length HW info.
*/
struct qlink_resp_get_hw_info {
struct qlink_resp rhdr;
__le32 fw_ver;
- __le32 hw_capab;
__le32 bld_tmstamp;
__le32 plat_id;
__le32 hw_ver;
- __le16 ql_proto_ver;
u8 num_mac;
u8 mac_bitmap;
u8 total_tx_chain;
u8 total_rx_chain;
- u8 alpha2[2];
- u8 n_reg_rules;
- u8 dfs_region;
- u8 info[0];
+ u8 info[];
} __packed;
/**
@@ -856,6 +1152,7 @@
QLINK_STA_INFO_RATE_FLAG_VHT_MCS = BIT(1),
QLINK_STA_INFO_RATE_FLAG_SHORT_GI = BIT(2),
QLINK_STA_INFO_RATE_FLAG_60G = BIT(3),
+ QLINK_STA_INFO_RATE_FLAG_HE_MCS = BIT(4),
};
/**
@@ -863,8 +1160,6 @@
*
* Response data containing statistics for specified STA.
*
- * @filled: a bitmask of &enum qlink_sta_info, specifies which info in response
- * is valid.
* @sta_addr: MAC address of STA the response carries statistic for.
* @info: variable statistics for specified STA.
*/
@@ -872,7 +1167,7 @@
struct qlink_resp rhdr;
u8 sta_addr[ETH_ALEN];
u8 rsvd[2];
- u8 info[0];
+ u8 info[];
} __packed;
/**
@@ -889,27 +1184,19 @@
u8 num_chans;
u8 num_bitrates;
u8 rsvd[1];
- u8 info[0];
-} __packed;
-
-/**
- * struct qlink_resp_phy_params - response for QLINK_CMD_PHY_PARAMS_GET command
- *
- * @info: variable-length array of PHY params.
- */
-struct qlink_resp_phy_params {
- struct qlink_resp rhdr;
- u8 info[0];
+ u8 info[];
} __packed;
/**
* struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd
*
+ * @chan_freq: center frequency for a channel the report is sent for.
* @info: variable-length channel info.
*/
struct qlink_resp_get_chan_stats {
- struct qlink_cmd rhdr;
- u8 info[0];
+ struct qlink_resp rhdr;
+ __le32 chan_freq;
+ u8 info[];
} __packed;
/**
@@ -920,6 +1207,19 @@
struct qlink_resp_channel_get {
struct qlink_resp rhdr;
struct qlink_chandef chan;
+} __packed;
+
+/**
+ * struct qlink_resp_txpwr - response for QLINK_CMD_TXPWR command
+ *
+ * This response is intended for QLINK_TXPWR_GET operation and does not
+ * contain any meaningful information in case of QLINK_TXPWR_SET operation.
+ *
+ * @txpwr: current transmit power setting, in mBm
+ */
+struct qlink_resp_txpwr {
+ struct qlink_resp rhdr;
+ __le32 txpwr;
} __packed;
/* QLINK Events messages related definitions
@@ -935,6 +1235,9 @@
QLINK_EVENT_BSS_LEAVE = 0x0027,
QLINK_EVENT_FREQ_CHANGE = 0x0028,
QLINK_EVENT_RADAR = 0x0029,
+ QLINK_EVENT_EXTERNAL_AUTH = 0x0030,
+ QLINK_EVENT_MIC_FAILURE = 0x0031,
+ QLINK_EVENT_UPDATE_OWE = 0x0032,
};
/**
@@ -967,7 +1270,7 @@
struct qlink_event ehdr;
u8 sta_addr[ETH_ALEN];
__le16 frame_control;
- u8 ies[0];
+ u8 ies[];
} __packed;
/**
@@ -985,13 +1288,16 @@
/**
* struct qlink_event_bss_join - data for QLINK_EVENT_BSS_JOIN event
*
+ * @chan: new operating channel definition
* @bssid: BSSID of a BSS which interface tried to joined.
* @status: status of joining attempt, see &enum ieee80211_statuscode.
*/
struct qlink_event_bss_join {
struct qlink_event ehdr;
+ struct qlink_chandef chan;
u8 bssid[ETH_ALEN];
__le16 status;
+ u8 ies[];
} __packed;
/**
@@ -1002,6 +1308,7 @@
struct qlink_event_bss_leave {
struct qlink_event ehdr;
__le16 reason;
+ u8 rsvd[2];
} __packed;
/**
@@ -1032,7 +1339,7 @@
__le32 flags;
s8 sig_dbm;
u8 rsvd[3];
- u8 frame_data[0];
+ u8 frame_data[];
} __packed;
/**
@@ -1060,7 +1367,7 @@
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 bssid[ETH_ALEN];
u8 rsvd[2];
- u8 payload[0];
+ u8 payload[];
} __packed;
/**
@@ -1107,19 +1414,69 @@
u8 rsvd[3];
} __packed;
+/**
+ * struct qlink_event_external_auth - data for QLINK_EVENT_EXTERNAL_AUTH event
+ *
+ * @ssid: SSID announced by BSS
+ * @ssid_len: SSID length
+ * @bssid: BSSID of the BSS to connect to
+ * @akm_suite: AKM suite for external authentication
+ * @action: action type/trigger for external authentication
+ */
+struct qlink_event_external_auth {
+ struct qlink_event ehdr;
+ __le32 akm_suite;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 bssid[ETH_ALEN];
+ u8 ssid_len;
+ u8 action;
+} __packed;
+
+/**
+ * struct qlink_event_mic_failure - data for QLINK_EVENT_MIC_FAILURE event
+ *
+ * @src: source MAC address of the frame
+ * @key_index: index of the key being reported
+ * @pairwise: whether the key is pairwise or group
+ */
+struct qlink_event_mic_failure {
+ struct qlink_event ehdr;
+ u8 src[ETH_ALEN];
+ u8 key_index;
+ u8 pairwise;
+} __packed;
+
+/**
+ * struct qlink_event_update_owe - data for QLINK_EVENT_UPDATE_OWE event
+ *
+ * @peer: MAC addr of the peer device for which OWE processing needs to be done
+ * @ies: IEs from the peer
+ */
+struct qlink_event_update_owe {
+ struct qlink_event ehdr;
+ u8 peer[ETH_ALEN];
+ u8 rsvd[2];
+ u8 ies[];
+} __packed;
+
/* QLINK TLVs (Type-Length Values) definitions
*/
/**
* enum qlink_tlv_id - list of TLVs that Qlink messages can carry
*
- * @QTN_TLV_ID_STA_STATS_MAP: a bitmap of &enum qlink_sta_info, used to
- * indicate which statistic carried in QTN_TLV_ID_STA_STATS is valid.
+ * @QTN_TLV_ID_BITMAP: a data representing a bitmap that is used together with
+ * other TLVs:
+ * &enum qlink_sta_info used to indicate which statistic carried in
+ * QTN_TLV_ID_STA_STATS is valid.
+ * &enum qlink_hw_capab listing wireless card capabilities.
+ * &enum qlink_driver_capab listing driver/host system capabilities.
+ * &enum qlink_chan_stat used to indicate which statistic carried in
+ * QTN_TLV_ID_CHANNEL_STATS is valid.
* @QTN_TLV_ID_STA_STATS: per-STA statistics as defined by
* &struct qlink_sta_stats. Valid values are marked as such in a bitmap
- * carried by QTN_TLV_ID_STA_STATS_MAP.
- * @QTN_TLV_ID_MAX_SCAN_SSIDS: maximum number of SSIDs the device can scan
- * for in any given scan.
+ * carried by QTN_TLV_ID_BITMAP.
+ * @QTN_TLV_ID_IFTYPE_DATA: supported band data.
*/
enum qlink_tlv_id {
QTN_TLV_ID_FRAG_THRESH = 0x0201,
@@ -1129,11 +1486,10 @@
QTN_TLV_ID_REG_RULE = 0x0207,
QTN_TLV_ID_CHANNEL = 0x020F,
QTN_TLV_ID_CHANDEF = 0x0210,
- QTN_TLV_ID_STA_STATS_MAP = 0x0211,
+ QTN_TLV_ID_BITMAP = 0x0211,
QTN_TLV_ID_STA_STATS = 0x0212,
QTN_TLV_ID_COVERAGE_CLASS = 0x0213,
QTN_TLV_ID_IFACE_LIMIT = 0x0214,
- QTN_TLV_ID_NUM_IFACE_COMB = 0x0215,
QTN_TLV_ID_CHANNEL_STATS = 0x0216,
QTN_TLV_ID_KEY = 0x0302,
QTN_TLV_ID_SEQ = 0x0303,
@@ -1148,19 +1504,15 @@
QTN_TLV_ID_CALIBRATION_VER = 0x0406,
QTN_TLV_ID_UBOOT_VER = 0x0407,
QTN_TLV_ID_RANDOM_MAC_ADDR = 0x0408,
- QTN_TLV_ID_MAX_SCAN_SSIDS = 0x0409,
QTN_TLV_ID_WOWLAN_CAPAB = 0x0410,
QTN_TLV_ID_WOWLAN_PATTERN = 0x0411,
+ QTN_TLV_ID_IFTYPE_DATA = 0x0418,
};
struct qlink_tlv_hdr {
__le16 type;
__le16 len;
- u8 val[0];
-} __packed;
-
-struct qlink_iface_comb_num {
- __le32 iface_comb_num;
+ u8 val[];
} __packed;
struct qlink_iface_limit {
@@ -1172,25 +1524,10 @@
__le16 max_interfaces;
u8 num_different_channels;
u8 n_limits;
- struct qlink_iface_limit limits[0];
+ struct qlink_iface_limit limits[];
} __packed;
#define QLINK_RSSI_OFFSET 120
-
-struct qlink_tlv_frag_rts_thr {
- struct qlink_tlv_hdr hdr;
- __le16 thr;
-} __packed;
-
-struct qlink_tlv_rlimit {
- struct qlink_tlv_hdr hdr;
- u8 rlimit;
-} __packed;
-
-struct qlink_tlv_cclass {
- struct qlink_tlv_hdr hdr;
- u8 cclass;
-} __packed;
/**
* enum qlink_reg_rule_flags - regulatory rule flags
@@ -1309,16 +1646,95 @@
struct qlink_tlv_hdr hdr;
u8 type;
u8 flags;
- u8 ie_data[0];
+ u8 rsvd[2];
+ u8 ie_data[];
} __packed;
+/**
+ * struct qlink_tlv_ext_ie - extension IE
+ *
+ * @eid_ext: element ID extension, one of &enum ieee80211_eid_ext.
+ * @ie_data: IEs data.
+ */
+struct qlink_tlv_ext_ie {
+ struct qlink_tlv_hdr hdr;
+ u8 eid_ext;
+ u8 rsvd[3];
+ u8 ie_data[];
+} __packed;
+
+#define IEEE80211_HE_PPE_THRES_MAX_LEN 25
+struct qlink_sband_iftype_data {
+ __le16 types_mask;
+ struct ieee80211_he_cap_elem he_cap_elem;
+ struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp;
+ u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN];
+} __packed;
+
+/**
+ * struct qlink_tlv_iftype_data - data for QTN_TLV_ID_IFTYPE_DATA
+ *
+ * @n_iftype_data: number of entries in iftype_data.
+ * @iftype_data: interface type data entries.
+ */
+struct qlink_tlv_iftype_data {
+ struct qlink_tlv_hdr hdr;
+ u8 n_iftype_data;
+ u8 rsvd[3];
+ struct qlink_sband_iftype_data iftype_data[];
+} __packed;
+
+/**
+ * enum qlink_chan_stat - channel statistics bitmap
+ *
+ * Used to indicate which statistics values in &struct qlink_chan_stats
+ * are valid. Individual values are used to fill a bitmap carried in a
+ * payload of QTN_TLV_ID_BITMAP.
+ *
+ * @QLINK_CHAN_STAT_TIME_ON: time_on value is valid.
+ * @QLINK_CHAN_STAT_TIME_TX: time_tx value is valid.
+ * @QLINK_CHAN_STAT_TIME_RX: time_rx value is valid.
+ * @QLINK_CHAN_STAT_CCA_BUSY: cca_busy value is valid.
+ * @QLINK_CHAN_STAT_CCA_BUSY_EXT: cca_busy_ext value is valid.
+ * @QLINK_CHAN_STAT_TIME_SCAN: time_scan value is valid.
+ * @QLINK_CHAN_STAT_CHAN_NOISE: chan_noise value is valid.
+ */
+enum qlink_chan_stat {
+ QLINK_CHAN_STAT_TIME_ON,
+ QLINK_CHAN_STAT_TIME_TX,
+ QLINK_CHAN_STAT_TIME_RX,
+ QLINK_CHAN_STAT_CCA_BUSY,
+ QLINK_CHAN_STAT_CCA_BUSY_EXT,
+ QLINK_CHAN_STAT_TIME_SCAN,
+ QLINK_CHAN_STAT_CHAN_NOISE,
+ QLINK_CHAN_STAT_NUM,
+};
+
+/**
+ * struct qlink_chan_stats - data for QTN_TLV_ID_CHANNEL_STATS
+ *
+ * Carries a per-channel statistics. Not all fields may be filled with
+ * valid values. Valid fields should be indicated as such using a bitmap of
+ * &enum qlink_chan_stat. Bitmap is carried separately in a payload of
+ * QTN_TLV_ID_BITMAP.
+ *
+ * @time_on: amount of time radio operated on that channel.
+ * @time_tx: amount of time radio spent transmitting on the channel.
+ * @time_rx: amount of time radio spent receiving on the channel.
+ * @cca_busy: amount of time the the primary channel was busy.
+ * @cca_busy_ext: amount of time the the secondary channel was busy.
+ * @time_scan: amount of radio spent scanning on the channel.
+ * @chan_noise: channel noise.
+ */
struct qlink_chan_stats {
- __le32 chan_num;
- __le32 cca_tx;
- __le32 cca_rx;
- __le32 cca_busy;
- __le32 cca_try;
+ __le64 time_on;
+ __le64 time_tx;
+ __le64 time_rx;
+ __le64 cca_busy;
+ __le64 cca_busy_ext;
+ __le64 time_scan;
s8 chan_noise;
+ u8 rsvd[3];
} __packed;
/**
@@ -1326,7 +1742,7 @@
*
* Used to indicate which statistics values in &struct qlink_sta_stats
* are valid. Individual values are used to fill a bitmap carried in a
- * payload of QTN_TLV_ID_STA_STATS_MAP.
+ * payload of QTN_TLV_ID_BITMAP.
*
* @QLINK_STA_INFO_CONNECTED_TIME: connected_time value is valid.
* @QLINK_STA_INFO_INACTIVE_TIME: inactive_time value is valid.
@@ -1390,7 +1806,7 @@
* Carries statistics of a STA. Not all fields may be filled with
* valid values. Valid fields should be indicated as such using a bitmap of
* &enum qlink_sta_info. Bitmap is carried separately in a payload of
- * QTN_TLV_ID_STA_STATS_MAP.
+ * QTN_TLV_ID_BITMAP.
*/
struct qlink_sta_stats {
__le64 rx_bytes;
@@ -1451,7 +1867,7 @@
struct qlink_wowlan_capab_data {
__le16 version;
__le16 len;
- u8 data[0];
+ u8 data[];
} __packed;
/**
--
Gitblit v1.6.2