From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++------
1 files changed, 102 insertions(+), 12 deletions(-)
diff --git a/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h b/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h
index f824beb..53b438d 100644
--- a/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h
+++ b/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h
@@ -8,6 +8,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
+ * Copyright(c) 2018 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,6 +31,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
+ * Copyright(c) 2018 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -318,6 +320,25 @@
} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */
/*
+ * struct iwl_hs20_roc_req_tail - tail of iwl_hs20_roc_req
+ *
+ * @node_addr: Our MAC Address
+ * @reserved: reserved for alignment
+ * @apply_time: GP2 value to start (should always be the current GP2 value)
+ * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
+ * time by which start of the event is allowed to be postponed.
+ * @duration: event duration in TU To calculate event duration:
+ * timeEventDuration = min(duration, remainingQuota)
+ */
+struct iwl_hs20_roc_req_tail {
+ u8 node_addr[ETH_ALEN];
+ __le16 reserved;
+ __le32 apply_time;
+ __le32 apply_time_max_delay;
+ __le32 duration;
+} __packed;
+
+/*
* Aux ROC command
*
* Command requests the firmware to create a time event for a certain duration
@@ -336,13 +357,6 @@
* @sta_id_and_color: station id and color, resumed during "Remain On Channel"
* activity.
* @channel_info: channel info
- * @node_addr: Our MAC Address
- * @reserved: reserved for alignment
- * @apply_time: GP2 value to start (should always be the current GP2 value)
- * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
- * time by which start of the event is allowed to be postponed.
- * @duration: event duration in TU To calculate event duration:
- * timeEventDuration = min(duration, remainingQuota)
*/
struct iwl_hs20_roc_req {
/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
@@ -351,11 +365,7 @@
__le32 event_unique_id;
__le32 sta_id_and_color;
struct iwl_fw_channel_info channel_info;
- u8 node_addr[ETH_ALEN];
- __le16 reserved;
- __le32 apply_time;
- __le32 apply_time_max_delay;
- __le32 duration;
+ struct iwl_hs20_roc_req_tail tail;
} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
/*
@@ -383,4 +393,84 @@
__le32 status;
} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
+/**
+ * enum iwl_mvm_session_prot_conf_id - session protection's configurations
+ * @SESSION_PROTECT_CONF_ASSOC: Start a session protection for association.
+ * The firmware will allocate two events.
+ * Valid for BSS_STA and P2P_STA.
+ * * A rather short event that can't be fragmented and with a very
+ * high priority. If every goes well (99% of the cases) the
+ * association should complete within this first event. During
+ * that event, no other activity will happen in the firmware,
+ * which is why it can't be too long.
+ * The length of this event is hard-coded in the firmware: 300TUs.
+ * * Another event which can be much longer (it's duration is
+ * configurable by the driver) which has a slightly lower
+ * priority and that can be fragmented allowing other activities
+ * to run while this event is running.
+ * The firmware will automatically remove both events once the driver sets
+ * the BSS MAC as associated. Neither of the events will be removed
+ * for the P2P_STA MAC.
+ * Only the duration is configurable for this protection.
+ * @SESSION_PROTECT_CONF_GO_CLIENT_ASSOC: not used
+ * @SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV: Schedule the P2P Device to be in
+ * listen mode. Will be fragmented. Valid only on the P2P Device MAC.
+ * Valid only on the P2P Device MAC. The firmware will take into account
+ * the duration, the interval and the repetition count.
+ * @SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION: Schedule the P2P Device to be be
+ * able to run the GO Negotiation. Will not be fragmented and not
+ * repetitive. Valid only on the P2P Device MAC. Only the duration will
+ * be taken into account.
+ * @SESSION_PROTECT_CONF_MAX_ID: not used
+ */
+enum iwl_mvm_session_prot_conf_id {
+ SESSION_PROTECT_CONF_ASSOC,
+ SESSION_PROTECT_CONF_GO_CLIENT_ASSOC,
+ SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV,
+ SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION,
+ SESSION_PROTECT_CONF_MAX_ID,
+}; /* SESSION_PROTECTION_CONF_ID_E_VER_1 */
+
+/**
+ * struct iwl_mvm_session_prot_cmd - configure a session protection
+ * @id_and_color: the id and color of the mac for which this session protection
+ * is sent
+ * @action: can be either FW_CTXT_ACTION_ADD or FW_CTXT_ACTION_REMOVE
+ * @conf_id: see &enum iwl_mvm_session_prot_conf_id
+ * @duration_tu: the duration of the whole protection in TUs.
+ * @repetition_count: not used
+ * @interval: not used
+ *
+ * Note: the session protection will always be scheduled to start as
+ * early as possible, but the maximum delay is configuration dependent.
+ * The firmware supports only one concurrent session protection per vif.
+ * Adding a new session protection will remove any currently running session.
+ */
+struct iwl_mvm_session_prot_cmd {
+ /* COMMON_INDEX_HDR_API_S_VER_1 hdr */
+ __le32 id_and_color;
+ __le32 action;
+ __le32 conf_id;
+ __le32 duration_tu;
+ __le32 repetition_count;
+ __le32 interval;
+} __packed; /* SESSION_PROTECTION_CMD_API_S_VER_1 */
+
+/**
+ * struct iwl_mvm_session_prot_notif - session protection started / ended
+ * @mac_id: the mac id for which the session protection started / ended
+ * @status: 1 means success, 0 means failure
+ * @start: 1 means the session protection started, 0 means it ended
+ * @conf_id: see &enum iwl_mvm_session_prot_conf_id
+ *
+ * Note that any session protection will always get two notifications: start
+ * and end even the firmware could not schedule it.
+ */
+struct iwl_mvm_session_prot_notif {
+ __le32 mac_id;
+ __le32 status;
+ __le32 start;
+ __le32 conf_id;
+} __packed; /* SESSION_PROTECTION_NOTIFICATION_API_S_VER_2 */
+
#endif /* __iwl_fw_api_time_event_h__ */
--
Gitblit v1.6.2