From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/intel/iwlwifi/fw/api/power.h | 179 ++++++++++++++++++++++++++++++++++++++++++++++++++++-------
1 files changed, 158 insertions(+), 21 deletions(-)
diff --git a/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/power.h b/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
index a3c77e0..4e6ad17 100644
--- a/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
+++ b/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
@@ -8,6 +8,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,6 +31,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -198,9 +200,16 @@
* @DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK:
* '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
+ * @DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK:
+ * Device Retention indication, '1' indicate retention is enabled.
+ * @DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK:
+ * 32Khz external slow clock valid indication, '1' indicate cloack is
+ * valid.
*/
enum iwl_device_power_flags {
- DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0),
+ DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0),
+ DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK = BIT(1),
+ DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK = BIT(12),
};
/**
@@ -316,48 +325,120 @@
IWL_TX_POWER_MODE_SET_DEVICE = 1,
IWL_TX_POWER_MODE_SET_CHAINS = 2,
IWL_TX_POWER_MODE_SET_ACK = 3,
-}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_4 */;
+ IWL_TX_POWER_MODE_SET_SAR_TIMER = 4,
+ IWL_TX_POWER_MODE_SET_SAR_TIMER_DEFAULT_TABLE = 5,
+}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_5 */;
+#define IWL_NUM_CHAIN_TABLES 1
+#define IWL_NUM_CHAIN_TABLES_V2 2
#define IWL_NUM_CHAIN_LIMITS 2
#define IWL_NUM_SUB_BANDS 5
+#define IWL_NUM_SUB_BANDS_V2 11
/**
- * struct iwl_dev_tx_power_cmd - TX power reduction command
+ * struct iwl_dev_tx_power_common - Common part of the TX power reduction cmd
* @set_mode: see &enum iwl_dev_tx_power_cmd_mode
* @mac_context_id: id of the mac ctx for which we are reducing TX power.
* @pwr_restriction: TX power restriction in 1/8 dBms.
* @dev_24: device TX power restriction in 1/8 dBms
* @dev_52_low: device TX power restriction upper band - low
* @dev_52_high: device TX power restriction upper band - high
- * @per_chain_restriction: per chain restrictions
*/
-struct iwl_dev_tx_power_cmd_v3 {
+struct iwl_dev_tx_power_common {
__le32 set_mode;
__le32 mac_context_id;
__le16 pwr_restriction;
__le16 dev_24;
__le16 dev_52_low;
__le16 dev_52_high;
- __le16 per_chain_restriction[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS];
+};
+
+/**
+ * struct iwl_dev_tx_power_cmd_v3 - TX power reduction command version 3
+ * @per_chain: per chain restrictions
+ */
+struct iwl_dev_tx_power_cmd_v3 {
+ __le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS];
} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */
#define IWL_DEV_MAX_TX_POWER 0x7FFF
/**
- * struct iwl_dev_tx_power_cmd - TX power reduction command
- * @v3: version 3 of the command, embedded here for easier software handling
+ * struct iwl_dev_tx_power_cmd_v4 - TX power reduction command version 4
+ * @per_chain: per chain restrictions
* @enable_ack_reduction: enable or disable close range ack TX power
* reduction.
* @reserved: reserved (padding)
*/
-struct iwl_dev_tx_power_cmd {
- /* v4 is just an extension of v3 - keep this here */
- struct iwl_dev_tx_power_cmd_v3 v3;
+struct iwl_dev_tx_power_cmd_v4 {
+ __le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS];
u8 enable_ack_reduction;
u8 reserved[3];
} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */
+/**
+ * struct iwl_dev_tx_power_cmd_v5 - TX power reduction command version 5
+ * @per_chain: per chain restrictions
+ * @enable_ack_reduction: enable or disable close range ack TX power
+ * reduction.
+ * @per_chain_restriction_changed: is per_chain_restriction has changed
+ * from last command. used if set_mode is
+ * IWL_TX_POWER_MODE_SET_SAR_TIMER.
+ * note: if not changed, the command is used for keep alive only.
+ * @reserved: reserved (padding)
+ * @timer_period: timer in milliseconds. if expires FW will change to default
+ * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER
+ */
+struct iwl_dev_tx_power_cmd_v5 {
+ __le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS];
+ u8 enable_ack_reduction;
+ u8 per_chain_restriction_changed;
+ u8 reserved[2];
+ __le32 timer_period;
+} __packed; /* TX_REDUCED_POWER_API_S_VER_5 */
+
+/**
+ * struct iwl_dev_tx_power_cmd_v5 - TX power reduction command version 5
+ * @per_chain: per chain restrictions
+ * @enable_ack_reduction: enable or disable close range ack TX power
+ * reduction.
+ * @per_chain_restriction_changed: is per_chain_restriction has changed
+ * from last command. used if set_mode is
+ * IWL_TX_POWER_MODE_SET_SAR_TIMER.
+ * note: if not changed, the command is used for keep alive only.
+ * @reserved: reserved (padding)
+ * @timer_period: timer in milliseconds. if expires FW will change to default
+ * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER
+ */
+struct iwl_dev_tx_power_cmd_v6 {
+ __le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2];
+ u8 enable_ack_reduction;
+ u8 per_chain_restriction_changed;
+ u8 reserved[2];
+ __le32 timer_period;
+} __packed; /* TX_REDUCED_POWER_API_S_VER_6 */
+
+/**
+ * struct iwl_dev_tx_power_cmd - TX power reduction command (multiversion)
+ * @common: common part of the command
+ * @v3: version 3 part of the command
+ * @v4: version 4 part of the command
+ * @v5: version 5 part of the command
+ * @v6: version 6 part of the command
+ */
+struct iwl_dev_tx_power_cmd {
+ struct iwl_dev_tx_power_common common;
+ union {
+ struct iwl_dev_tx_power_cmd_v3 v3;
+ struct iwl_dev_tx_power_cmd_v4 v4;
+ struct iwl_dev_tx_power_cmd_v5 v5;
+ struct iwl_dev_tx_power_cmd_v6 v6;
+ };
+};
+
#define IWL_NUM_GEO_PROFILES 3
+#define IWL_NUM_BANDS_PER_CHAIN_V1 2
+#define IWL_NUM_BANDS_PER_CHAIN_V2 3
/**
* enum iwl_geo_per_chain_offset_operation - type of operation
@@ -381,20 +462,45 @@
u8 chain_b;
} __packed; /* PER_CHAIN_LIMIT_OFFSET_PER_CHAIN_S_VER_1 */
-struct iwl_per_chain_offset_group {
- struct iwl_per_chain_offset lb;
- struct iwl_per_chain_offset hb;
-} __packed; /* PER_CHAIN_LIMIT_OFFSET_GROUP_S_VER_1 */
-
/**
- * struct iwl_geo_tx_power_profile_cmd - struct for GEO_TX_POWER_LIMIT cmd.
+ * struct iwl_geo_tx_power_profile_cmd_v1 - struct for GEO_TX_POWER_LIMIT cmd.
* @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
* @table: offset profile per band.
*/
-struct iwl_geo_tx_power_profiles_cmd {
+struct iwl_geo_tx_power_profiles_cmd_v1 {
__le32 ops;
- struct iwl_per_chain_offset_group table[IWL_NUM_GEO_PROFILES];
-} __packed; /* GEO_TX_POWER_LIMIT */
+ struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1];
+} __packed; /* GEO_TX_POWER_LIMIT_VER_1 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v2 - struct for GEO_TX_POWER_LIMIT cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ * @table_revision: BIOS table revision.
+ */
+struct iwl_geo_tx_power_profiles_cmd_v2 {
+ __le32 ops;
+ struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1];
+ __le32 table_revision;
+} __packed; /* GEO_TX_POWER_LIMIT_VER_2 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v3 - struct for GEO_TX_POWER_LIMIT cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ * @table_revision: BIOS table revision.
+ */
+struct iwl_geo_tx_power_profiles_cmd_v3 {
+ __le32 ops;
+ struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V2];
+ __le32 table_revision;
+} __packed; /* GEO_TX_POWER_LIMIT_VER_3 */
+
+union iwl_geo_tx_power_profiles_cmd {
+ struct iwl_geo_tx_power_profiles_cmd_v1 v1;
+ struct iwl_geo_tx_power_profiles_cmd_v2 v2;
+ struct iwl_geo_tx_power_profiles_cmd_v3 v3;
+};
/**
* struct iwl_geo_tx_power_profiles_resp - response to GEO_TX_POWER_LIMIT cmd
@@ -403,6 +509,28 @@
struct iwl_geo_tx_power_profiles_resp {
__le32 profile_idx;
} __packed; /* GEO_TX_POWER_LIMIT_RESP */
+
+/**
+ * union iwl_ppag_table_cmd - union for all versions of PPAG command
+ * @v1: version 1, table revision = 0
+ * @v2: version 2, table revision = 1
+ *
+ * @enabled: 1 if PPAG is enabled, 0 otherwise
+ * @gain: table of antenna gain values per chain and sub-band
+ * @reserved: reserved
+ */
+union iwl_ppag_table_cmd {
+ struct {
+ __le32 enabled;
+ s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS];
+ s8 reserved[2];
+ } v1;
+ struct {
+ __le32 enabled;
+ s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2];
+ s8 reserved[2];
+ } v2;
+} __packed;
/**
* struct iwl_beacon_filter_cmd
@@ -444,6 +572,13 @@
* @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
* for a longer period of time then this escape-timeout. Units: Beacons.
* @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
+ * @bf_threshold_absolute_low: See below.
+ * @bf_threshold_absolute_high: Send Beacon to driver if Energy value calculated
+ * for this beacon crossed this absolute threshold. For the 'Increase'
+ * direction the bf_energy_absolute_low[i] is used. For the 'Decrease'
+ * direction the bf_energy_absolute_high[i] is used. Zero value means
+ * that this specific threshold is ignored for beacon filtering, and
+ * beacon will not be forced to be sent to driver due to this setting.
*/
struct iwl_beacon_filter_cmd {
__le32 bf_energy_delta;
@@ -457,7 +592,9 @@
__le32 bf_escape_timer;
__le32 ba_escape_timer;
__le32 ba_enable_beacon_abort;
-} __packed;
+ __le32 bf_threshold_absolute_low[2];
+ __le32 bf_threshold_absolute_high[2];
+} __packed; /* BEACON_FILTER_CONFIG_API_S_VER_4 */
/* Beacon filtering and beacon abort */
#define IWL_BF_ENERGY_DELTA_DEFAULT 5
--
Gitblit v1.6.2