From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/intel/iwlwifi/fw/api/config.h | 46 +++++++++++++++++++++++++++++++++++-----------
1 files changed, 35 insertions(+), 11 deletions(-)
diff --git a/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/config.h b/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/config.h
index 7f645b6..546fa60 100644
--- a/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/config.h
+++ b/kernel/drivers/net/wireless/intel/iwlwifi/fw/api/config.h
@@ -8,6 +8,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 - 2019 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,6 +31,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 - 2019 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -118,25 +120,47 @@
};
/**
+ * struct iwl_phy_specific_cfg - specific PHY filter configuration
+ *
+ * Sent as part of the phy configuration command (v3) to configure specific FW
+ * defined PHY filters that can be applied to each antenna.
+ *
+ * @filter_cfg_chain_a: filter config id for LMAC1 chain A
+ * @filter_cfg_chain_b: filter config id for LMAC1 chain B
+ * @filter_cfg_chain_c: filter config id for LMAC2 chain A
+ * @filter_cfg_chain_d: filter config id for LMAC2 chain B
+ * values: 0 - no filter; 0xffffffff - reserved; otherwise - filter id
+ */
+struct iwl_phy_specific_cfg {
+ __le32 filter_cfg_chain_a;
+ __le32 filter_cfg_chain_b;
+ __le32 filter_cfg_chain_c;
+ __le32 filter_cfg_chain_d;
+} __packed; /* PHY_SPECIFIC_CONFIGURATION_API_VER_1*/
+
+/**
* struct iwl_phy_cfg_cmd - Phy configuration command
+ *
* @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
* @calib_control: calibration control data
*/
-struct iwl_phy_cfg_cmd {
+struct iwl_phy_cfg_cmd_v1 {
__le32 phy_cfg;
struct iwl_calib_ctrl calib_control;
} __packed;
-#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1))
-#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3))
-#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5))
-#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7))
-#define PHY_CFG_TX_CHAIN_A BIT(8)
-#define PHY_CFG_TX_CHAIN_B BIT(9)
-#define PHY_CFG_TX_CHAIN_C BIT(10)
-#define PHY_CFG_RX_CHAIN_A BIT(12)
-#define PHY_CFG_RX_CHAIN_B BIT(13)
-#define PHY_CFG_RX_CHAIN_C BIT(14)
+/**
+ * struct iwl_phy_cfg_cmd_v3 - Phy configuration command (v3)
+ *
+ * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
+ * @calib_control: calibration control data
+ * @phy_specific_cfg: configure predefined PHY filters
+ */
+struct iwl_phy_cfg_cmd_v3 {
+ __le32 phy_cfg;
+ struct iwl_calib_ctrl calib_control;
+ struct iwl_phy_specific_cfg phy_specific_cfg;
+} __packed; /* PHY_CONFIGURATION_CMD_API_S_VER_3 */
/*
* enum iwl_dc2dc_config_id - flag ids
--
Gitblit v1.6.2