From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/wireless/intel/iwlegacy/4965.c | 65 ++++++++++++--------------------
1 files changed, 25 insertions(+), 40 deletions(-)
diff --git a/kernel/drivers/net/wireless/intel/iwlegacy/4965.c b/kernel/drivers/net/wireless/intel/iwlegacy/4965.c
index c3c638e..9fa5564 100644
--- a/kernel/drivers/net/wireless/intel/iwlegacy/4965.c
+++ b/kernel/drivers/net/wireless/intel/iwlegacy/4965.c
@@ -1,22 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/******************************************************************************
*
* Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
@@ -32,6 +17,7 @@
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <linux/units.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
@@ -39,7 +25,7 @@
#include "common.h"
#include "4965.h"
-/**
+/*
* il_verify_inst_sparse - verify runtime uCode image in card vs. host,
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
@@ -71,7 +57,7 @@
return ret;
}
-/**
+/*
* il4965_verify_inst_full - verify runtime uCode image in card vs. host,
* looking at all data.
*/
@@ -110,7 +96,7 @@
return ret;
}
-/**
+/*
* il4965_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
@@ -306,7 +292,7 @@
return 0;
}
-/**
+/*
* il4965_load_bsm - Load bootstrap instructions
*
* BSM operation:
@@ -416,7 +402,7 @@
return 0;
}
-/**
+/*
* il4965_set_ucode_ptrs - Set uCode address location
*
* Tell initialization uCode where to find runtime uCode.
@@ -430,7 +416,6 @@
{
dma_addr_t pinst;
dma_addr_t pdata;
- int ret = 0;
/* bits 35:4 for 4965 */
pinst = il->ucode_code.p_addr >> 4;
@@ -447,10 +432,10 @@
il->ucode_code.len | BSM_DRAM_INST_LOAD);
D_INFO("Runtime uCode pointers are set.\n");
- return ret;
+ return 0;
}
-/**
+/*
* il4965_init_alive_start - Called after N_ALIVE notification received
*
* Called after N_ALIVE notification received from "initialize" uCode.
@@ -577,13 +562,12 @@
sign = -sign;
denom = -denom;
}
- *res = 1;
*res = ((num * 2 + denom) / (denom * 2)) * sign;
return 1;
}
-/**
+/*
* il4965_get_voltage_compensation - Power supply voltage comp for txpower
*
* Determines power supply voltage compensation for txpower calculations.
@@ -670,7 +654,7 @@
}
}
-/**
+/*
* il4965_interpolate_chan - Interpolate factory measurements for one channel
*
* Interpolates factory measurements from the two sample channels within a
@@ -1120,7 +1104,7 @@
/* get current temperature (Celsius) */
current_temp = max(il->temperature, IL_TX_POWER_TEMPERATURE_MIN);
current_temp = min(il->temperature, IL_TX_POWER_TEMPERATURE_MAX);
- current_temp = KELVIN_TO_CELSIUS(current_temp);
+ current_temp = kelvin_to_celsius(current_temp);
/* select thermal txpower adjustment params, based on channel group
* (same frequency group used for mimo txatten adjustment) */
@@ -1247,7 +1231,7 @@
return 0;
}
-/**
+/*
* il4965_send_tx_power - Configure the TXPOWER level user limit
*
* Uses the active RXON for channel, band, and characteristics (ht40, high)
@@ -1296,6 +1280,8 @@
struct il4965_rxon_assoc_cmd rxon_assoc;
const struct il_rxon_cmd *rxon1 = &il->staging;
const struct il_rxon_cmd *rxon2 = &il->active;
+
+ lockdep_assert_held(&il->mutex);
if (rxon1->flags == rxon2->flags &&
rxon1->filter_flags == rxon2->filter_flags &&
@@ -1542,7 +1528,7 @@
return il_send_cmd_pdu(il, C_CHANNEL_SWITCH, sizeof(cmd), &cmd);
}
-/**
+/*
* il4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
static void
@@ -1567,9 +1553,8 @@
bc_ent;
}
-/**
+/*
* il4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
- * @stats: Provides the temperature reading from the uCode
*
* A return of <0 indicates bogus data in the stats
*/
@@ -1624,8 +1609,8 @@
temperature =
(temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
- D_TEMP("Calibrated temperature: %dK, %dC\n", temperature,
- KELVIN_TO_CELSIUS(temperature));
+ D_TEMP("Calibrated temperature: %dK, %ldC\n", temperature,
+ kelvin_to_celsius(temperature));
return temperature;
}
@@ -1633,7 +1618,7 @@
/* Adjust Txpower only if temperature variance is greater than threshold. */
#define IL_TEMPERATURE_THRESHOLD 3
-/**
+/*
* il4965_is_temp_calib_needed - determines if new calibration is needed
*
* If the temperature changed has changed sufficiently, then a recalibration
@@ -1684,12 +1669,12 @@
if (il->temperature != temp) {
if (il->temperature)
- D_TEMP("Temperature changed " "from %dC to %dC\n",
- KELVIN_TO_CELSIUS(il->temperature),
- KELVIN_TO_CELSIUS(temp));
+ D_TEMP("Temperature changed " "from %ldC to %ldC\n",
+ kelvin_to_celsius(il->temperature),
+ kelvin_to_celsius(temp));
else
- D_TEMP("Temperature " "initialized to %dC\n",
- KELVIN_TO_CELSIUS(temp));
+ D_TEMP("Temperature " "initialized to %ldC\n",
+ kelvin_to_celsius(temp));
}
il->temperature = temp;
--
Gitblit v1.6.2