From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM

---
 kernel/drivers/net/phy/bcm-phy-lib.h |   50 +++++++++++++++++++++++++++++++++++++++++---------
 1 files changed, 41 insertions(+), 9 deletions(-)

diff --git a/kernel/drivers/net/phy/bcm-phy-lib.h b/kernel/drivers/net/phy/bcm-phy-lib.h
index 81cceaa..237a850 100644
--- a/kernel/drivers/net/phy/bcm-phy-lib.h
+++ b/kernel/drivers/net/phy/bcm-phy-lib.h
@@ -1,14 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #ifndef _LINUX_BCM_PHY_LIB_H
@@ -17,8 +9,30 @@
 #include <linux/brcmphy.h>
 #include <linux/phy.h>
 
+/* 28nm only register definitions */
+#define MISC_ADDR(base, channel)	base, channel
+
+#define DSP_TAP10			MISC_ADDR(0x0a, 0)
+#define PLL_PLLCTRL_1			MISC_ADDR(0x32, 1)
+#define PLL_PLLCTRL_2			MISC_ADDR(0x32, 2)
+#define PLL_PLLCTRL_4			MISC_ADDR(0x33, 0)
+
+#define AFE_RXCONFIG_0			MISC_ADDR(0x38, 0)
+#define AFE_RXCONFIG_1			MISC_ADDR(0x38, 1)
+#define AFE_RXCONFIG_2			MISC_ADDR(0x38, 2)
+#define AFE_RX_LP_COUNTER		MISC_ADDR(0x38, 3)
+#define AFE_TX_CONFIG			MISC_ADDR(0x39, 0)
+#define AFE_VDCA_ICTRL_0		MISC_ADDR(0x39, 1)
+#define AFE_VDAC_OTHERS_0		MISC_ADDR(0x39, 3)
+#define AFE_HPF_TRIM_OTHERS		MISC_ADDR(0x3a, 0)
+
+
+int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set);
 int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
 int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set);
 
 static inline int bcm_phy_write_exp_sel(struct phy_device *phydev,
 					u16 reg, u16 val)
@@ -38,6 +52,15 @@
 			 u16 val);
 int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
 
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+			 u16 set);
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+		       u16 set);
+
 int bcm_phy_ack_intr(struct phy_device *phydev);
 int bcm_phy_config_intr(struct phy_device *phydev);
 
@@ -53,5 +76,14 @@
 void bcm_phy_get_strings(struct phy_device *phydev, u8 *data);
 void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
 		       struct ethtool_stats *stats, u64 *data);
+void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
+int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
+int bcm_phy_enable_jumbo(struct phy_device *phydev);
+
+int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
+				      bool *finished);
+int bcm_phy_cable_test_start_rdb(struct phy_device *phydev);
+int bcm_phy_cable_test_start(struct phy_device *phydev);
+int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished);
 
 #endif /* _LINUX_BCM_PHY_LIB_H */

--
Gitblit v1.6.2