From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/net/dsa/mv88e6xxx/chip.c | 40 ++++++++++++++++++++++++++++++++--------
1 files changed, 32 insertions(+), 8 deletions(-)
diff --git a/kernel/drivers/net/dsa/mv88e6xxx/chip.c b/kernel/drivers/net/dsa/mv88e6xxx/chip.c
index 371b345..53fbef9 100644
--- a/kernel/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/kernel/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2310,12 +2310,22 @@
/* If there is a GPIO connected to the reset pin, toggle it */
if (gpiod) {
+ /* If the switch has just been reset and not yet completed
+ * loading EEPROM, the reset may interrupt the I2C transaction
+ * mid-byte, causing the first EEPROM read after the reset
+ * from the wrong location resulting in the switch booting
+ * to wrong mode and inoperable.
+ */
+ if (chip->info->ops->get_eeprom)
+ mv88e6xxx_g2_eeprom_wait(chip);
+
gpiod_set_value_cansleep(gpiod, 1);
usleep_range(10000, 20000);
gpiod_set_value_cansleep(gpiod, 0);
usleep_range(10000, 20000);
- mv88e6xxx_g1_wait_eeprom_done(chip);
+ if (chip->info->ops->get_eeprom)
+ mv88e6xxx_g2_eeprom_wait(chip);
}
}
@@ -2611,9 +2621,14 @@
* If this is the upstream port for this switch, enable
* forwarding of unknown unicasts and multicasts.
*/
- reg = MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP |
- MV88E6185_PORT_CTL0_USE_TAG | MV88E6185_PORT_CTL0_USE_IP |
+ reg = MV88E6185_PORT_CTL0_USE_TAG | MV88E6185_PORT_CTL0_USE_IP |
MV88E6XXX_PORT_CTL0_STATE_FORWARDING;
+ /* Forward any IPv4 IGMP or IPv6 MLD frames received
+ * by a USER port to the CPU port to allow snooping.
+ */
+ if (dsa_is_user_port(ds, port))
+ reg |= MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP;
+
err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL0, reg);
if (err)
return err;
@@ -2734,13 +2749,24 @@
return 10240 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
else if (chip->info->ops->set_max_frame_size)
return 1632 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
- return 1522 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
+ return ETH_DATA_LEN;
}
static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct mv88e6xxx_chip *chip = ds->priv;
int ret = 0;
+
+ /* For families where we don't know how to alter the MTU,
+ * just accept any value up to ETH_DATA_LEN
+ */
+ if (!chip->info->ops->port_set_jumbo_size &&
+ !chip->info->ops->set_max_frame_size) {
+ if (new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+
+ return 0;
+ }
if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
new_mtu += EDSA_HLEN;
@@ -2750,9 +2776,6 @@
ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu);
else if (chip->info->ops->set_max_frame_size)
ret = chip->info->ops->set_max_frame_size(chip, new_mtu);
- else
- if (new_mtu > 1522)
- ret = -EINVAL;
mv88e6xxx_reg_unlock(chip);
return ret;
@@ -4169,6 +4192,7 @@
.set_cpu_port = mv88e6095_g1_set_cpu_port,
.set_egress_port = mv88e6095_g1_set_egress_port,
.watchdog_ops = &mv88e6390_watchdog_ops,
+ .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5533,7 +5557,7 @@
goto out;
}
if (chip->reset)
- usleep_range(1000, 2000);
+ usleep_range(10000, 20000);
err = mv88e6xxx_detect(chip);
if (err)
--
Gitblit v1.6.2