From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c | 294 +++++++++++++++++++++++++++++++++++++---------------------
1 files changed, 186 insertions(+), 108 deletions(-)
diff --git a/kernel/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c b/kernel/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
index f8904f7..7a00fe5 100644
--- a/kernel/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
+++ b/kernel/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
@@ -71,39 +71,39 @@
unsigned int i = 0;
REG_SET_2(reg->start_cntl_b, 0,
- exp_region_start, params->arr_points[0].custom_float_x,
+ exp_region_start, params->corner_points[0].blue.custom_float_x,
exp_resion_start_segment, 0);
REG_SET_2(reg->start_cntl_g, 0,
- exp_region_start, params->arr_points[0].custom_float_x,
+ exp_region_start, params->corner_points[0].green.custom_float_x,
exp_resion_start_segment, 0);
REG_SET_2(reg->start_cntl_r, 0,
- exp_region_start, params->arr_points[0].custom_float_x,
+ exp_region_start, params->corner_points[0].red.custom_float_x,
exp_resion_start_segment, 0);
REG_SET(reg->start_slope_cntl_b, 0,
- field_region_linear_slope, params->arr_points[0].custom_float_slope);
+ field_region_linear_slope, params->corner_points[0].blue.custom_float_slope);
REG_SET(reg->start_slope_cntl_g, 0,
- field_region_linear_slope, params->arr_points[0].custom_float_slope);
+ field_region_linear_slope, params->corner_points[0].green.custom_float_slope);
REG_SET(reg->start_slope_cntl_r, 0,
- field_region_linear_slope, params->arr_points[0].custom_float_slope);
+ field_region_linear_slope, params->corner_points[0].red.custom_float_slope);
REG_SET(reg->start_end_cntl1_b, 0,
- field_region_end, params->arr_points[1].custom_float_x);
+ field_region_end, params->corner_points[1].blue.custom_float_x);
REG_SET_2(reg->start_end_cntl2_b, 0,
- field_region_end_slope, params->arr_points[1].custom_float_slope,
- field_region_end_base, params->arr_points[1].custom_float_y);
+ field_region_end_slope, params->corner_points[1].blue.custom_float_slope,
+ field_region_end_base, params->corner_points[1].blue.custom_float_y);
REG_SET(reg->start_end_cntl1_g, 0,
- field_region_end, params->arr_points[1].custom_float_x);
+ field_region_end, params->corner_points[1].green.custom_float_x);
REG_SET_2(reg->start_end_cntl2_g, 0,
- field_region_end_slope, params->arr_points[1].custom_float_slope,
- field_region_end_base, params->arr_points[1].custom_float_y);
+ field_region_end_slope, params->corner_points[1].green.custom_float_slope,
+ field_region_end_base, params->corner_points[1].green.custom_float_y);
REG_SET(reg->start_end_cntl1_r, 0,
- field_region_end, params->arr_points[1].custom_float_x);
+ field_region_end, params->corner_points[1].red.custom_float_x);
REG_SET_2(reg->start_end_cntl2_r, 0,
- field_region_end_slope, params->arr_points[1].custom_float_slope,
- field_region_end_base, params->arr_points[1].custom_float_y);
+ field_region_end_slope, params->corner_points[1].red.custom_float_slope,
+ field_region_end_base, params->corner_points[1].red.custom_float_y);
for (reg_region_cur = reg->region_start;
reg_region_cur <= reg->region_end;
@@ -127,7 +127,7 @@
bool cm_helper_convert_to_custom_float(
struct pwl_result_data *rgb_resulted,
- struct curve_points *arr_points,
+ struct curve_points3 *corner_points,
uint32_t hw_points_num,
bool fixpoint)
{
@@ -141,20 +141,53 @@
fmt.mantissa_bits = 12;
fmt.sign = false;
- if (!convert_to_custom_float_format(arr_points[0].x, &fmt,
- &arr_points[0].custom_float_x)) {
+ /* corner_points[0] - beginning base, slope offset for R,G,B
+ * corner_points[1] - end base, slope offset for R,G,B
+ */
+ if (!convert_to_custom_float_format(corner_points[0].red.x, &fmt,
+ &corner_points[0].red.custom_float_x)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[0].green.x, &fmt,
+ &corner_points[0].green.custom_float_x)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[0].blue.x, &fmt,
+ &corner_points[0].blue.custom_float_x)) {
BREAK_TO_DEBUGGER();
return false;
}
- if (!convert_to_custom_float_format(arr_points[0].offset, &fmt,
- &arr_points[0].custom_float_offset)) {
+ if (!convert_to_custom_float_format(corner_points[0].red.offset, &fmt,
+ &corner_points[0].red.custom_float_offset)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[0].green.offset, &fmt,
+ &corner_points[0].green.custom_float_offset)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[0].blue.offset, &fmt,
+ &corner_points[0].blue.custom_float_offset)) {
BREAK_TO_DEBUGGER();
return false;
}
- if (!convert_to_custom_float_format(arr_points[0].slope, &fmt,
- &arr_points[0].custom_float_slope)) {
+ if (!convert_to_custom_float_format(corner_points[0].red.slope, &fmt,
+ &corner_points[0].red.custom_float_slope)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[0].green.slope, &fmt,
+ &corner_points[0].green.custom_float_slope)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[0].blue.slope, &fmt,
+ &corner_points[0].blue.custom_float_slope)) {
BREAK_TO_DEBUGGER();
return false;
}
@@ -162,22 +195,59 @@
fmt.mantissa_bits = 10;
fmt.sign = false;
- if (!convert_to_custom_float_format(arr_points[1].x, &fmt,
- &arr_points[1].custom_float_x)) {
+ if (!convert_to_custom_float_format(corner_points[1].red.x, &fmt,
+ &corner_points[1].red.custom_float_x)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[1].green.x, &fmt,
+ &corner_points[1].green.custom_float_x)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[1].blue.x, &fmt,
+ &corner_points[1].blue.custom_float_x)) {
BREAK_TO_DEBUGGER();
return false;
}
- if (fixpoint == true)
- arr_points[1].custom_float_y = dc_fixpt_clamp_u0d14(arr_points[1].y);
- else if (!convert_to_custom_float_format(arr_points[1].y, &fmt,
- &arr_points[1].custom_float_y)) {
+ if (fixpoint == true) {
+ corner_points[1].red.custom_float_y =
+ dc_fixpt_clamp_u0d14(corner_points[1].red.y);
+ corner_points[1].green.custom_float_y =
+ dc_fixpt_clamp_u0d14(corner_points[1].green.y);
+ corner_points[1].blue.custom_float_y =
+ dc_fixpt_clamp_u0d14(corner_points[1].blue.y);
+ } else {
+ if (!convert_to_custom_float_format(corner_points[1].red.y,
+ &fmt, &corner_points[1].red.custom_float_y)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[1].green.y,
+ &fmt, &corner_points[1].green.custom_float_y)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[1].blue.y,
+ &fmt, &corner_points[1].blue.custom_float_y)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ }
+
+ if (!convert_to_custom_float_format(corner_points[1].red.slope, &fmt,
+ &corner_points[1].red.custom_float_slope)) {
BREAK_TO_DEBUGGER();
return false;
}
-
- if (!convert_to_custom_float_format(arr_points[1].slope, &fmt,
- &arr_points[1].custom_float_slope)) {
+ if (!convert_to_custom_float_format(corner_points[1].green.slope, &fmt,
+ &corner_points[1].green.custom_float_slope)) {
+ BREAK_TO_DEBUGGER();
+ return false;
+ }
+ if (!convert_to_custom_float_format(corner_points[1].blue.slope, &fmt,
+ &corner_points[1].blue.custom_float_slope)) {
BREAK_TO_DEBUGGER();
return false;
}
@@ -242,15 +312,11 @@
const struct dc_transfer_func *output_tf,
struct pwl_params *lut_params, bool fixpoint)
{
- struct curve_points *arr_points;
+ struct curve_points3 *corner_points;
struct pwl_result_data *rgb_resulted;
struct pwl_result_data *rgb;
struct pwl_result_data *rgb_plus_1;
- struct fixed31_32 y_r;
- struct fixed31_32 y_g;
- struct fixed31_32 y_b;
- struct fixed31_32 y1_min;
- struct fixed31_32 y3_max;
+ struct pwl_result_data *rgb_minus_1;
int32_t region_start, region_end;
int32_t i;
@@ -259,16 +325,14 @@
if (output_tf == NULL || lut_params == NULL || output_tf->type == TF_TYPE_BYPASS)
return false;
- PERF_TRACE();
-
- arr_points = lut_params->arr_points;
+ corner_points = lut_params->corner_points;
rgb_resulted = lut_params->rgb_resulted;
hw_points = 0;
memset(lut_params, 0, sizeof(struct pwl_params));
memset(seg_distr, 0, sizeof(seg_distr));
- if (output_tf->tf == TRANSFER_FUNCTION_PQ) {
+ if (output_tf->tf == TRANSFER_FUNCTION_PQ || output_tf->tf == TRANSFER_FUNCTION_GAMMA22) {
/* 32 segments
* segments are from 2^-25 to 2^7
*/
@@ -278,8 +342,8 @@
region_start = -MAX_LOW_POINT;
region_end = NUMBER_REGIONS - MAX_LOW_POINT;
} else {
- /* 10 segments
- * segment is from 2^-10 to 2^0
+ /* 11 segments
+ * segment is from 2^-10 to 2^1
* There are less than 256 points, for optimization
*/
seg_distr[0] = 3;
@@ -328,31 +392,41 @@
rgb_resulted[hw_points - 1].green = output_tf->tf_pts.green[start_index];
rgb_resulted[hw_points - 1].blue = output_tf->tf_pts.blue[start_index];
- arr_points[0].x = dc_fixpt_pow(dc_fixpt_from_int(2),
+ rgb_resulted[hw_points].red = rgb_resulted[hw_points - 1].red;
+ rgb_resulted[hw_points].green = rgb_resulted[hw_points - 1].green;
+ rgb_resulted[hw_points].blue = rgb_resulted[hw_points - 1].blue;
+
+ // All 3 color channels have same x
+ corner_points[0].red.x = dc_fixpt_pow(dc_fixpt_from_int(2),
dc_fixpt_from_int(region_start));
- arr_points[1].x = dc_fixpt_pow(dc_fixpt_from_int(2),
+ corner_points[0].green.x = corner_points[0].red.x;
+ corner_points[0].blue.x = corner_points[0].red.x;
+
+ corner_points[1].red.x = dc_fixpt_pow(dc_fixpt_from_int(2),
dc_fixpt_from_int(region_end));
+ corner_points[1].green.x = corner_points[1].red.x;
+ corner_points[1].blue.x = corner_points[1].red.x;
- y_r = rgb_resulted[0].red;
- y_g = rgb_resulted[0].green;
- y_b = rgb_resulted[0].blue;
+ corner_points[0].red.y = rgb_resulted[0].red;
+ corner_points[0].green.y = rgb_resulted[0].green;
+ corner_points[0].blue.y = rgb_resulted[0].blue;
- y1_min = dc_fixpt_min(y_r, dc_fixpt_min(y_g, y_b));
-
- arr_points[0].y = y1_min;
- arr_points[0].slope = dc_fixpt_div(arr_points[0].y, arr_points[0].x);
- y_r = rgb_resulted[hw_points - 1].red;
- y_g = rgb_resulted[hw_points - 1].green;
- y_b = rgb_resulted[hw_points - 1].blue;
+ corner_points[0].red.slope = dc_fixpt_div(corner_points[0].red.y,
+ corner_points[0].red.x);
+ corner_points[0].green.slope = dc_fixpt_div(corner_points[0].green.y,
+ corner_points[0].green.x);
+ corner_points[0].blue.slope = dc_fixpt_div(corner_points[0].blue.y,
+ corner_points[0].blue.x);
/* see comment above, m_arrPoints[1].y should be the Y value for the
* region end (m_numOfHwPoints), not last HW point(m_numOfHwPoints - 1)
*/
- y3_max = dc_fixpt_max(y_r, dc_fixpt_max(y_g, y_b));
-
- arr_points[1].y = y3_max;
-
- arr_points[1].slope = dc_fixpt_zero;
+ corner_points[1].red.y = rgb_resulted[hw_points - 1].red;
+ corner_points[1].green.y = rgb_resulted[hw_points - 1].green;
+ corner_points[1].blue.y = rgb_resulted[hw_points - 1].blue;
+ corner_points[1].red.slope = dc_fixpt_zero;
+ corner_points[1].green.slope = dc_fixpt_zero;
+ corner_points[1].blue.slope = dc_fixpt_zero;
if (output_tf->tf == TRANSFER_FUNCTION_PQ) {
/* for PQ, we want to have a straight line from last HW X point,
@@ -361,9 +435,15 @@
const struct fixed31_32 end_value =
dc_fixpt_from_int(125);
- arr_points[1].slope = dc_fixpt_div(
- dc_fixpt_sub(dc_fixpt_one, arr_points[1].y),
- dc_fixpt_sub(end_value, arr_points[1].x));
+ corner_points[1].red.slope = dc_fixpt_div(
+ dc_fixpt_sub(dc_fixpt_one, corner_points[1].red.y),
+ dc_fixpt_sub(end_value, corner_points[1].red.x));
+ corner_points[1].green.slope = dc_fixpt_div(
+ dc_fixpt_sub(dc_fixpt_one, corner_points[1].green.y),
+ dc_fixpt_sub(end_value, corner_points[1].green.x));
+ corner_points[1].blue.slope = dc_fixpt_div(
+ dc_fixpt_sub(dc_fixpt_one, corner_points[1].blue.y),
+ dc_fixpt_sub(end_value, corner_points[1].blue.x));
}
lut_params->hw_points_num = hw_points;
@@ -384,15 +464,19 @@
rgb = rgb_resulted;
rgb_plus_1 = rgb_resulted + 1;
+ rgb_minus_1 = rgb;
i = 1;
while (i != hw_points + 1) {
- if (dc_fixpt_lt(rgb_plus_1->red, rgb->red))
- rgb_plus_1->red = rgb->red;
- if (dc_fixpt_lt(rgb_plus_1->green, rgb->green))
- rgb_plus_1->green = rgb->green;
- if (dc_fixpt_lt(rgb_plus_1->blue, rgb->blue))
- rgb_plus_1->blue = rgb->blue;
+
+ if (i >= hw_points - 1) {
+ if (dc_fixpt_lt(rgb_plus_1->red, rgb->red))
+ rgb_plus_1->red = dc_fixpt_add(rgb->red, rgb_minus_1->delta_red);
+ if (dc_fixpt_lt(rgb_plus_1->green, rgb->green))
+ rgb_plus_1->green = dc_fixpt_add(rgb->green, rgb_minus_1->delta_green);
+ if (dc_fixpt_lt(rgb_plus_1->blue, rgb->blue))
+ rgb_plus_1->blue = dc_fixpt_add(rgb->blue, rgb_minus_1->delta_blue);
+ }
rgb->delta_red = dc_fixpt_sub(rgb_plus_1->red, rgb->red);
rgb->delta_green = dc_fixpt_sub(rgb_plus_1->green, rgb->green);
@@ -408,11 +492,12 @@
}
++rgb_plus_1;
+ rgb_minus_1 = rgb;
++rgb;
++i;
}
cm_helper_convert_to_custom_float(rgb_resulted,
- lut_params->arr_points,
+ lut_params->corner_points,
hw_points, fixpoint);
return true;
@@ -425,15 +510,10 @@
const struct dc_transfer_func *output_tf,
struct pwl_params *lut_params)
{
- struct curve_points *arr_points;
+ struct curve_points3 *corner_points;
struct pwl_result_data *rgb_resulted;
struct pwl_result_data *rgb;
struct pwl_result_data *rgb_plus_1;
- struct fixed31_32 y_r;
- struct fixed31_32 y_g;
- struct fixed31_32 y_b;
- struct fixed31_32 y1_min;
- struct fixed31_32 y3_max;
int32_t region_start, region_end;
int32_t i;
@@ -442,9 +522,7 @@
if (output_tf == NULL || lut_params == NULL || output_tf->type == TF_TYPE_BYPASS)
return false;
- PERF_TRACE();
-
- arr_points = lut_params->arr_points;
+ corner_points = lut_params->corner_points;
rgb_resulted = lut_params->rgb_resulted;
hw_points = 0;
@@ -490,31 +568,32 @@
rgb_resulted[hw_points - 1].green = output_tf->tf_pts.green[start_index];
rgb_resulted[hw_points - 1].blue = output_tf->tf_pts.blue[start_index];
- arr_points[0].x = dc_fixpt_pow(dc_fixpt_from_int(2),
+ rgb_resulted[hw_points].red = rgb_resulted[hw_points - 1].red;
+ rgb_resulted[hw_points].green = rgb_resulted[hw_points - 1].green;
+ rgb_resulted[hw_points].blue = rgb_resulted[hw_points - 1].blue;
+
+ corner_points[0].red.x = dc_fixpt_pow(dc_fixpt_from_int(2),
dc_fixpt_from_int(region_start));
- arr_points[1].x = dc_fixpt_pow(dc_fixpt_from_int(2),
+ corner_points[0].green.x = corner_points[0].red.x;
+ corner_points[0].blue.x = corner_points[0].red.x;
+ corner_points[1].red.x = dc_fixpt_pow(dc_fixpt_from_int(2),
dc_fixpt_from_int(region_end));
+ corner_points[1].green.x = corner_points[1].red.x;
+ corner_points[1].blue.x = corner_points[1].red.x;
- y_r = rgb_resulted[0].red;
- y_g = rgb_resulted[0].green;
- y_b = rgb_resulted[0].blue;
-
- y1_min = dc_fixpt_min(y_r, dc_fixpt_min(y_g, y_b));
-
- arr_points[0].y = y1_min;
- arr_points[0].slope = dc_fixpt_div(arr_points[0].y, arr_points[0].x);
- y_r = rgb_resulted[hw_points - 1].red;
- y_g = rgb_resulted[hw_points - 1].green;
- y_b = rgb_resulted[hw_points - 1].blue;
+ corner_points[0].red.y = rgb_resulted[0].red;
+ corner_points[0].green.y = rgb_resulted[0].green;
+ corner_points[0].blue.y = rgb_resulted[0].blue;
/* see comment above, m_arrPoints[1].y should be the Y value for the
* region end (m_numOfHwPoints), not last HW point(m_numOfHwPoints - 1)
*/
- y3_max = dc_fixpt_max(y_r, dc_fixpt_max(y_g, y_b));
-
- arr_points[1].y = y3_max;
-
- arr_points[1].slope = dc_fixpt_zero;
+ corner_points[1].red.y = rgb_resulted[hw_points - 1].red;
+ corner_points[1].green.y = rgb_resulted[hw_points - 1].green;
+ corner_points[1].blue.y = rgb_resulted[hw_points - 1].blue;
+ corner_points[1].red.slope = dc_fixpt_zero;
+ corner_points[1].green.slope = dc_fixpt_zero;
+ corner_points[1].blue.slope = dc_fixpt_zero;
if (output_tf->tf == TRANSFER_FUNCTION_PQ) {
/* for PQ, we want to have a straight line from last HW X point,
@@ -523,9 +602,15 @@
const struct fixed31_32 end_value =
dc_fixpt_from_int(125);
- arr_points[1].slope = dc_fixpt_div(
- dc_fixpt_sub(dc_fixpt_one, arr_points[1].y),
- dc_fixpt_sub(end_value, arr_points[1].x));
+ corner_points[1].red.slope = dc_fixpt_div(
+ dc_fixpt_sub(dc_fixpt_one, corner_points[1].red.y),
+ dc_fixpt_sub(end_value, corner_points[1].red.x));
+ corner_points[1].green.slope = dc_fixpt_div(
+ dc_fixpt_sub(dc_fixpt_one, corner_points[1].green.y),
+ dc_fixpt_sub(end_value, corner_points[1].green.x));
+ corner_points[1].blue.slope = dc_fixpt_div(
+ dc_fixpt_sub(dc_fixpt_one, corner_points[1].blue.y),
+ dc_fixpt_sub(end_value, corner_points[1].blue.x));
}
lut_params->hw_points_num = hw_points;
@@ -549,13 +634,6 @@
i = 1;
while (i != hw_points + 1) {
- if (dc_fixpt_lt(rgb_plus_1->red, rgb->red))
- rgb_plus_1->red = rgb->red;
- if (dc_fixpt_lt(rgb_plus_1->green, rgb->green))
- rgb_plus_1->green = rgb->green;
- if (dc_fixpt_lt(rgb_plus_1->blue, rgb->blue))
- rgb_plus_1->blue = rgb->blue;
-
rgb->delta_red = dc_fixpt_sub(rgb_plus_1->red, rgb->red);
rgb->delta_green = dc_fixpt_sub(rgb_plus_1->green, rgb->green);
rgb->delta_blue = dc_fixpt_sub(rgb_plus_1->blue, rgb->blue);
@@ -565,7 +643,7 @@
++i;
}
cm_helper_convert_to_custom_float(rgb_resulted,
- lut_params->arr_points,
+ lut_params->corner_points,
hw_points, false);
return true;
--
Gitblit v1.6.2