From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi | 101 +++++++++++++++++++++++++++++++++++---------------
1 files changed, 71 insertions(+), 30 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
index 6fa4b51..aabaeba 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
@@ -89,6 +89,25 @@
regulator-boot-on;
};
#endif
+
+#if 0
+ leds: leds {
+ compatible = "gpio-leds";
+ sig_led: sig_led {
+ gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ err_led: err_led {
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+#endif
+
ndj_io_init {
compatible = "nk_io_control";
pinctrl-names = "default";
@@ -106,16 +125,26 @@
gpio_function = <0>;
};
- hub_host2_rst {
- gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
+ vcc_3.3v {
+ gpio_num = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
+ gpio_function = <0>;
+ };
+
+ ax88772_rst {
+ gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B5_3V3
gpio_function = <3>;
};
+ ax88631_rst {
+ gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B6_3V3
+ gpio_function = <3>;
+ };
+/*
hub_host3 {
gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
gpio_function = <0>;
};
-
+*/
wake_4g {
gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
gpio_function = <0>;
@@ -136,10 +165,10 @@
gpio_function = <0>;
};
- hp_en {
- gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
- gpio_function = <0>;
- };
+ //gpio99 {
+ // gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
+ // gpio_function = <1>;
+ //};
wifi_power_en {
gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
@@ -312,7 +341,7 @@
* when dsi0 is enabled
*/
&video_phy0 {
- status = "okay";
+ status = "disabled";
};
&dsi0 {
@@ -398,7 +427,7 @@
};
&lvds {
- status = "okay";
+ status = "disabled";
ports {
port@1 {
reg = <1>;
@@ -415,7 +444,7 @@
};
&lvds_in_vp1 {
- status = "okay";
+ status = "disabled";
};
/*
@@ -635,7 +664,7 @@
&pcie30phy {
- status = "okay";
+ status = "disabled";
};
&pcie2x1 {
@@ -694,12 +723,27 @@
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
- <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
- <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
- <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
- <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
- <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B0_u_3V3 DO1 8
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B3_u_3V3 DO2 11
+ <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B4_u_3V3 DO3 12
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B5_u_3V3 DO4 13
+ <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B6_u_3V3 DO5 14
+
+ <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C0_d_3V3 DI1 16
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C1_d_3V3 DI2 17
+ <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C2_d_3V3 DI3 18
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C3_d_3V3 DI4 19
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C5_d_3V3 DI5 21
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, //sig_led
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>, //err_led
+ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, //run_led
+ <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; //HOST3_EN_GPIO4_B2_1V8
+
};
};
};
@@ -764,15 +808,6 @@
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};
-&vcc3v3_lcd0_n {
- gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-};
-
-&vcc3v3_lcd1_n {
- gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
- enable-active-high;
-};
&wireless_wlan {
pinctrl-names = "default";
@@ -792,17 +827,17 @@
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ status = "disabled";
};
&uart0 {
- status = "okay";
+ status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
- status = "okay";
+ status = "disabled";
};
&uart3 {
@@ -811,7 +846,7 @@
};
&uart4 {
- status = "okay";
+ status = "disabled";
pinctrl-0 = <&uart4m1_xfer>;
};
@@ -820,12 +855,18 @@
pinctrl-0 = <&uart5m1_xfer>;
};
+
&uart7 {
status = "okay";
pinctrl-0 = <&uart7m1_xfer>;
};
+&uart8 {
+ status = "disabled";
+ pinctrl-0 = <&uart8m1_xfer>;
+};
+
&uart9 {
- status = "okay";
+ status = "disabled";
pinctrl-0 = <&uart9m1_xfer>;
};
--
Gitblit v1.6.2