From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/arch/arm64/boot/dts/qcom/ipq8074.dtsi | 93 ++++++++++++++++++++++++++++++----------------
1 files changed, 60 insertions(+), 33 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/kernel/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 0b7d4f9..c9ec643 100644
--- a/kernel/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/kernel/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -108,7 +108,7 @@
#phy-cells = <0>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
- clock-output-names = "gcc_usb1_pipe_clk_src";
+ clock-output-names = "usb3phy_1_cc_pipe_clk";
};
};
@@ -151,7 +151,7 @@
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
- clock-output-names = "gcc_usb0_pipe_clk_src";
+ clock-output-names = "usb3phy_0_cc_pipe_clk";
};
};
@@ -167,34 +167,61 @@
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
};
- pcie_phy0: phy@86000 {
- compatible = "qcom,ipq8074-qmp-pcie-phy";
- reg = <0x00086000 0x1000>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
- clock-names = "pipe_clk";
- clock-output-names = "pcie20_phy0_pipe_clk";
+ pcie_qmp0: phy@84000 {
+ compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+ reg = <0x00084000 0x1bc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
+
+ pcie_phy0: phy@84200 {
+ reg = <0x84200 0x16c>,
+ <0x84400 0x200>,
+ <0x84800 0x1f0>,
+ <0x84c00 0xf4>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "pcie20_phy0_pipe_clk";
+ };
};
- pcie_phy1: phy@8e000 {
+ pcie_qmp1: phy@8e000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
- reg = <0x0008e000 0x1000>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
- clock-names = "pipe_clk";
- clock-output-names = "pcie20_phy1_pipe_clk";
+ reg = <0x0008e000 0x1c4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE1_PHY_BCR>,
<&gcc GCC_PCIE1PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
+
+ pcie_phy1: phy@8e200 {
+ reg = <0x8e200 0x130>,
+ <0x8e400 0x200>,
+ <0x8e800 0x1f8>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "pcie20_phy1_pipe_clk";
+ };
};
tlmm: pinctrl@1000000 {
@@ -580,10 +607,8 @@
phys = <&pcie_phy1>;
phy-names = "pciephy";
- ranges = <0x81000000 0 0x10200000 0x10200000
- 0 0x100000 /* downstream I/O */
- 0x82000000 0 0x10300000 0x10300000
- 0 0xd00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */
+ <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
@@ -626,26 +651,26 @@
};
pcie0: pci@20000000 {
- compatible = "qcom,pcie-ipq8074";
+ compatible = "qcom,pcie-ipq8074-gen3";
reg = <0x20000000 0xf1d>,
<0x20000f20 0xa8>,
- <0x00080000 0x2000>,
+ <0x20001000 0x1000>,
+ <0x00080000 0x4000>,
<0x20100000 0x1000>;
- reg-names = "dbi", "elbi", "parf", "config";
+ reg-names = "dbi", "elbi", "atu", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
+ max-link-speed = <3>;
#address-cells = <3>;
#size-cells = <2>;
phys = <&pcie_phy0>;
phy-names = "pciephy";
- ranges = <0x81000000 0 0x20200000 0x20200000
- 0 0x100000 /* downstream I/O */
- 0x82000000 0 0x20300000 0x20300000
- 0 0xd00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
+ <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
@@ -663,28 +688,30 @@
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>,
- <&gcc GCC_PCIE0_AUX_CLK>;
-
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE0_RCHNG_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
- "ahb",
- "aux";
+ "axi_bridge",
+ "rchng";
+
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
<&gcc GCC_PCIE0_SLEEP_ARES>,
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE0_AHB_ARES>,
- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
- "axi_m_sticky";
+ "axi_m_sticky",
+ "axi_s_sticky";
status = "disabled";
};
};
--
Gitblit v1.6.2