From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 24 +++++++++++++-----------
1 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/kernel/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 7212dc4..dde7cfe 100644
--- a/kernel/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/kernel/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -36,13 +36,13 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-blue {
label = "rbox-pro:blue:on";
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- red {
+ led-red {
label = "rbox-pro:red:standby";
gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
default-state = "off";
@@ -101,10 +101,6 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
amlogic,tx-delay-ns = <2>;
/* External PHY is in RGMII */
@@ -113,9 +109,13 @@
&external_mdio {
external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ /* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
};
};
@@ -143,10 +143,13 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
+
+ /* WiFi firmware requires power to be kept while in suspend */
+ keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
@@ -167,11 +170,10 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
--
Gitblit v1.6.2