From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/devicetree/bindings/phy/ti-phy.txt | 36 ------------------------------------
1 files changed, 0 insertions(+), 36 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt b/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt
index 57dfda8..60c9d0a 100644
--- a/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -27,42 +27,6 @@
reg-names = "otghs_control";
};
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
- Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
- DRA7x
- Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
- in DRA7x
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
- phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
- - clock-names: should include:
- * "wkupclk" - wakeup clock.
- * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
- the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
- module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
- compatible = "ti,omap-usb2";
- reg = <0x4a0ad080 0x58>;
- ctrl-module = <&omap_control_usb>;
- #phy-cells = <0>;
- clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
- clock-names = "wkupclk", "refclk";
-};
-
TI PIPE3 PHY
Required properties:
--
Gitblit v1.6.2