From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 35 +++++++++++++++++++++--------------
1 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/kernel/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 7d72b21..7771eca 100644
--- a/kernel/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/kernel/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -9,26 +9,34 @@
mailbox.txt for generic information about mailbox device-tree bindings.
Required properties:
-- compatible: Must be "mediatek,mt8173-gce"
+- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce" or
+ "mediatek,mt6779-gce".
- reg: Address range of the GCE unit
- interrupts: The interrupt signal from the GCE block
- clock: Clocks according to the common clock binding
- clock-names: Must be "gce" to stand for GCE clock
-- #mbox-cells: Should be 3.
- <&phandle channel priority atomic_exec>
+- #mbox-cells: Should be 2.
+ <&phandle channel priority>
phandle: Label name of a gce node.
channel: Channel of mailbox. Be equal to the thread id of GCE.
priority: Priority of GCE thread.
- atomic_exec: GCE processing continuous packets of commands in atomic
- way.
Required properties for a client device:
- mboxes: Client use mailbox to communicate with GCE, it should have this
property and list of phandle, mailbox specifiers.
-- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
- to the register address.
+Optional properties for a client device:
+- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
+ to the register address, it should have this property and list of phandle,
+ sub-system specifiers.
+ <&phandle subsys_number start_offset size>
+ phandle: Label name of a gce node.
+ subsys_number: specify the sub-system id which is corresponding
+ to the register address.
+ start_offset: the start offset of register address that GCE can access.
+ size: the total size of register address that GCE can access.
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
+'dt-binding/gce/mt8183-gce.h' or 'dt-bindings/gce/mt6779-gce.h'. Such as
sub-system ids, thread priority, event ids.
Example:
@@ -39,19 +47,18 @@
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_GCE>;
clock-names = "gce";
- thread-num = CMDQ_THR_MAX_COUNT;
- #mbox-cells = <3>;
+ #mbox-cells = <2>;
};
Example for a client device:
mmsys: clock-controller@14000000 {
compatible = "mediatek,mt8173-mmsys";
- mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
- <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
- mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+ mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>,
+ <&gce 1 CMDQ_THR_PRIO_LOWEST>;
mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
+ <&gce SUBSYS_1401XXXX 0x2000 0x100>;
...
};
--
Gitblit v1.6.2