From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt | 116 +++++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 91 insertions(+), 25 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index 127baa3..c549924 100644
--- a/kernel/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -5,39 +5,105 @@
- compatible: "st,stmpe-ts"
Optional properties:
-- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
- 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
- -> 144 clocks), recommended is 4.
-- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
-- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
- reference)
-- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
-- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
- samples, 3 -> 8 samples)
-- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
- 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
- is 3
-- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
- -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
-- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
- the fractional part) recommended is 7
-- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
- mA max, 1 -> 50 mA typical 80 mA max)
+- st,ave-ctrl : Sample average control
+ 0 -> 1 sample
+ 1 -> 2 samples
+ 2 -> 4 samples
+ 3 -> 8 samples
+- st,touch-det-delay : Touch detect interrupt delay (recommended is 3)
+ 0 -> 10 us
+ 1 -> 50 us
+ 2 -> 100 us
+ 3 -> 500 us
+ 4 -> 1 ms
+ 5 -> 5 ms
+ 6 -> 10 ms
+ 7 -> 50 ms
+- st,settling : Panel driver settling time (recommended is 2)
+ 0 -> 10 us
+ 1 -> 100 us
+ 2 -> 500 us
+ 3 -> 1 ms
+ 4 -> 5 ms
+ 5 -> 10 ms
+ 6 -> 50 ms
+ 7 -> 100 ms
+- st,fraction-z : Length of the fractional part in z (recommended is 7)
+ (fraction-z ([0..7]) = Count of the fractional part)
+- st,i-drive : current limit value of the touchscreen drivers
+ 0 -> 20 mA (typical 35mA max)
+ 1 -> 50 mA (typical 80 mA max)
+
+Optional properties common with MFD (deprecated):
+ - st,sample-time : ADC conversion time in number of clock.
+ 0 -> 36 clocks
+ 1 -> 44 clocks
+ 2 -> 56 clocks
+ 3 -> 64 clocks
+ 4 -> 80 clocks (recommended)
+ 5 -> 96 clocks
+ 6 -> 124 clocks
+ - st,mod-12b : ADC Bit mode
+ 0 -> 10bit ADC
+ 1 -> 12bit ADC
+ - st,ref-sel : ADC reference source
+ 0 -> internal
+ 1 -> external
+ - st,adc-freq : ADC Clock speed
+ 0 -> 1.625 MHz
+ 1 -> 3.25 MHz
+ 2 || 3 -> 6.5 MHz
Node name must be stmpe_touchscreen and should be child node of stmpe node to
which it belongs.
+Note that common ADC settings of stmpe_touchscreen (child) will take precedence
+over the settings done in MFD.
+
Example:
+
+stmpe811@41 {
+ compatible = "st,stmpe811";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ /* Common ADC settings */
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <1>;
- st,touch-det-delay = <2>;
- st,settling = <2>;
+ reg = <0>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 7 length fractional part in z */
st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
st,i-drive = <1>;
};
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>;
+ };
+};
--
Gitblit v1.6.2