From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM

---
 kernel/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/kernel/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/kernel/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index ea2d6e0..cef4bc1 100644
--- a/kernel/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/kernel/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -7,11 +7,21 @@
   "st,lsm6dsl"
   "st,lsm6dsm"
   "st,ism330dlc"
+  "st,lsm6dso"
+  "st,asm330lhh"
+  "st,lsm6dsox"
+  "st,lsm6dsr"
+  "st,lsm6ds3tr-c"
+  "st,ism330dhcx"
+  "st,lsm9ds1-imu"
+  "st,lsm6ds0"
+  "st,lsm6dsrx"
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties:
 - st,drdy-int-pin: the pin on the package that will be used to signal
   "data ready" (valid values: 1 or 2).
+- st,pullups : enable/disable internal i2c controller pullup resistors.
 - drive-open-drain: the interrupt/data ready line will be configured
   as open drain, which is useful if several sensors share the same
   interrupt line. This is a boolean property.
@@ -23,6 +33,7 @@
 - interrupts: interrupt mapping for IRQ. It should be configured with
   flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
   IRQ_TYPE_EDGE_FALLING.
+- wakeup-source: Enables wake up of host system on event.
 
   Refer to interrupt-controller/interrupts.txt for generic interrupt
   client node bindings.

--
Gitblit v1.6.2