From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt | 31 +++++++++++++++++++++++++------
1 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index ef973a0..2015f50 100644
--- a/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -1,9 +1,16 @@
I2C for Atmel platforms
Required properties :
-- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
- "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
- "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c" or "atmel,sama5d2-i2c"
+- compatible : Must be one of:
+ "atmel,at91rm9200-i2c",
+ "atmel,at91sam9261-i2c",
+ "atmel,at91sam9260-i2c",
+ "atmel,at91sam9g20-i2c",
+ "atmel,at91sam9g10-i2c",
+ "atmel,at91sam9x5-i2c",
+ "atmel,sama5d4-i2c",
+ "atmel,sama5d2-i2c",
+ "microchip,sam9x60-i2c".
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
@@ -17,9 +24,16 @@
- dma-names: should contain "tx" and "rx".
- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c"
- and "atmel,sama5d2-i2c".
+- i2c-sda-hold-time-ns: TWD hold time, only available for:
+ "atmel,sama5d4-i2c",
+ "atmel,sama5d2-i2c",
+ "microchip,sam9x60-i2c".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+ bus recovery, call it "gpio" state
- Child nodes conforming to i2c bus binding
+
Examples :
@@ -33,7 +47,7 @@
clock-frequency = <400000>;
24c512@50 {
- compatible = "24c512";
+ compatible = "atmel,24c512";
reg = <0x50>;
pagesize = <128>;
}
@@ -55,6 +69,11 @@
clocks = <&flx0>;
atmel,fifo-size = <16>;
i2c-sda-hold-time-ns = <336>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
wm8731: wm8731@1a {
compatible = "wm8731";
--
Gitblit v1.6.2