From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/devicetree/bindings/cpufreq/cpufreq-rockchip.txt | 81 ----------------------------------------
1 files changed, 1 insertions(+), 80 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/cpufreq/cpufreq-rockchip.txt b/kernel/Documentation/devicetree/bindings/cpufreq/cpufreq-rockchip.txt
index 617572a..55865c2 100644
--- a/kernel/Documentation/devicetree/bindings/cpufreq/cpufreq-rockchip.txt
+++ b/kernel/Documentation/devicetree/bindings/cpufreq/cpufreq-rockchip.txt
@@ -8,83 +8,4 @@
on operating-points-v2, but the driver can also create the "cpufreq-dt"
platform_device to compatibility with operating-points.
-For more information about the expected DT format [See: ../opp/opp.txt].
-
-Optional properties:
-In 'operating-points-v2' table:
-- rockchip,leakage-voltage-sel: The property is an array of 3-tuples items, and
- each item consists of leakage and voltage selector like
- <min-leakage max-leakage volt-selector>.
- min-leakage: minimum leakage in mA, ranges from 1 to 254.
- max-leakage: maximum leakage in mA, ranges from 1 to 254.
- voltage-selector: a sequence number which is used to math
- opp-microvolt-L<number> roperty in OPP node.
-
-- rockchip,pvtm-voltage-sel: The property is an array of 3-tuples items, and
- each item consists of pvtm and voltage selector like
- <min-pvtm max-pvtm volt-selector>.
- min-pvtm: minimum frequency count in KHz.
- max-pvtm: maximum frequency count in KHz.
- voltage-selector: a sequence number which is used to math
- opp-microvolt-L<number> roperty in OPP node.
-- rockchip,pvtm-freq: Clock frequency in KHz, which is used to set the cpu clock
- frequency before get frequency count of pvtm.
-- rockchip,pvtm-volt: Voltage in uV, which is used to set the cpu voltage before
- get frequency count of pvtm.
-- rockchip,pvtm-ch: An array of two integers containing pvtm channel and clock
- oscillation ring.
-- rockchip,pvtm-sample-time: The number of milliseconds to wait for pvtm to
- finish counting.
-- rockchip,pvtm-number: An integer indicating the number of sampling points.
-- rockchip,pvtm-error: An integer indicating the error between the sample
- results.
-- rockchip,pvtm-ref-temp: The SoC internal temperature in degree centigrade, the
- min-pvtm and max-pvtm in 'leakage-voltage-sel' are
- measured at reference temperature.
-- rockchip,pvtm-temp-prop: An array of two integers containing proportional
- constants which is used to convert the value at current
- temperature to reference temperature. The first one is
- used when current temperature is below reference
- temperature. Conversely, The second one is used when
- current temperature is above reference temperature.
-- rockchip,pvtm-thermal-zone: A thermal zone node containing thermal sensor,
- it's used to get the current temperature.
-- rockchip,thermal-zone: A thermal zone node containing thermal sensor,
- it's used to get the current temperature.
-
-- nvmem-cells: A phandle to cpu_leakage data provided by a nvmem device.
-- nvmem-cell-names: Should be "cpu_leakage"
-
-- rockchip,threshold-freq: Clock frequency in KHz, it's used to reduce power
- for SoCs with two clusters.
-- rockchip,freq-limit: Only one cluster can contain the property, and the
- cluster's maximum frequency will be limited to its
- threshold frequency, if the other cluster's frequency
- is geater than or equal to its threshold frequency.
-
-Examples:
-
-cpus {
- cpu@0 {
- operating-points-v2 = <&cluster0_opp>;
- };
-}
-
-cluster0_opp: opp_table0 {
- compatible = "operating-points-v2";
- opp-shared;
- rockchip,leakage-voltage-sel = <
- 1 24 0
- 25 254 1
- >;
- nvmem-cells = <&cpu_leakage>;
- nvmem-cell-names = "cpu_leakage";
-
- opp@216000000 {
- opp-hz = /bits/ 64 <216000000>;
- opp-microvolt = <950000 950000 1350000>;
- opp-microvolt-L0 = <1050000 1050000 1350000>;
- opp-microvolt-L1 = <950000 950000 1350000>;
- opp-suspend;
- }
-};
+For more information about the expected DT format [See: ../opp/rockchip-opp.txt].
--
Gitblit v1.6.2