From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt
index 0d01f2d..df42ab7 100644
--- a/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt
+++ b/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt
@@ -4,10 +4,10 @@
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] http://www.ti.com/product/cdce913
-[3] http://www.ti.com/product/cdce925
-[4] http://www.ti.com/product/cdce937
-[5] http://www.ti.com/product/cdce949
+[2] https://www.ti.com/product/cdce913
+[3] https://www.ti.com/product/cdce925
+[4] https://www.ti.com/product/cdce937
+[5] https://www.ti.com/product/cdce949
The driver provides clock sources for each output Y1 through Y5.
@@ -24,6 +24,8 @@
Optional properties:
- xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
board, or to compensate for external influences.
+- vdd-supply: A regulator node for Vdd
+- vddout-supply: A regulator node for Vddout
For all PLL1, PLL2, ... an optional child node can be used to specify spread
spectrum clocking parameters for a board.
@@ -41,6 +43,8 @@
clocks = <&xtal_27Mhz>;
#clock-cells = <1>;
xtal-load-pf = <5>;
+ vdd-supply = <&1v8-reg>;
+ vddout-supply = <&3v3-reg>;
/* PLL options to get SSC 1% centered */
PLL2 {
spread-spectrum = <4>;
--
Gitblit v1.6.2