From 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 22 Oct 2024 10:36:11 +0000
Subject: [PATCH] 修改4g拨号为QMI,需要在系统里后台执行quectel-CM
---
kernel/Documentation/ABI/testing/sysfs-driver-toshiba_acpi | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
index f34221b..e5a438d 100644
--- a/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
@@ -4,10 +4,12 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the keyboard backlight operation mode, valid
values are:
+
* 0x1 -> FN-Z
* 0x2 -> AUTO (also called TIMER)
* 0x8 -> ON
* 0x10 -> OFF
+
Note that from kernel 3.16 onwards this file accepts all listed
parameters, kernel 3.15 only accepts the first two (FN-Z and
AUTO).
@@ -41,8 +43,10 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This files controls the status of the touchpad and pointing
stick (if available), valid values are:
+
* 0 -> OFF
* 1 -> ON
+
Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes
@@ -51,10 +55,12 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file shows the supported keyboard backlight modes
the system supports, which can be:
+
* 0x1 -> FN-Z
* 0x2 -> AUTO (also called TIMER)
* 0x8 -> ON
* 0x10 -> OFF
+
Note that not all keyboard types support the listed modes.
See the entry named "available_kbd_modes"
Users: KToshiba
@@ -65,6 +71,7 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file shows the current keyboard backlight type,
which can be:
+
* 1 -> Type 1, supporting modes FN-Z and AUTO
* 2 -> Type 2, supporting modes TIMER, ON and OFF
Users: KToshiba
@@ -75,10 +82,12 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB Sleep & Charge charging mode, which
can be:
+
* 0 -> Disabled (0x00)
* 1 -> Alternate (0x09)
* 2 -> Auto (0x21)
* 3 -> Typical (0x11)
+
Note that from kernel 4.1 onwards this file accepts all listed
values, kernel 4.0 only supports the first three.
Note that this feature only works when connected to power, if
@@ -93,8 +102,10 @@
Description: This file controls the USB Sleep Functions under battery, and
set the level at which point they will be disabled, accepted
values can be:
+
* 0 -> Disabled
* 1-100 -> Battery level to disable sleep functions
+
Currently it prints two values, the first one indicates if the
feature is enabled or disabled, while the second one shows the
current battery level set.
@@ -107,8 +118,10 @@
KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB Rapid Charge state, which can be:
+
* 0 -> Disabled
* 1 -> Enabled
+
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
@@ -118,8 +131,10 @@
KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the Sleep & Music state, which values can be:
+
* 0 -> Disabled
* 1 -> Enabled
+
Note that this feature only works when connected to power, if
you want to use it under battery, see the entry named
"sleep_functions_on_battery"
@@ -138,6 +153,7 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the state of the internal fan, valid
values are:
+
* 0 -> OFF
* 1 -> ON
@@ -147,8 +163,10 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the Special Functions (hotkeys) operation
mode, valid values are:
+
* 0 -> Normal Operation
* 1 -> Special Functions
+
In the "Normal Operation" mode, the F{1-12} keys are as usual
and the hotkeys are accessed via FN-F{1-12}.
In the "Special Functions" mode, the F{1-12} keys trigger the
@@ -163,8 +181,10 @@
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls whether the laptop should turn ON whenever
the LID is opened, valid values are:
+
* 0 -> Disabled
* 1 -> Enabled
+
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
@@ -174,8 +194,10 @@
KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB 3 functionality, valid values are:
+
* 0 -> Disabled (Acts as a regular USB 2)
* 1 -> Enabled (Full USB 3 functionality)
+
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
@@ -188,10 +210,14 @@
Reading this file prints two values, the first is the actual cooling method
and the second is the maximum cooling method supported.
When the maximum cooling method is ONE, valid values are:
+
* 0 -> Maximum Performance
* 1 -> Battery Optimized
+
When the maximum cooling method is TWO, valid values are:
+
* 0 -> Maximum Performance
* 1 -> Performance
* 2 -> Battery Optimized
+
Users: KToshiba
--
Gitblit v1.6.2