From 890e1df1bec891d9203724541e81f8fbe5183388 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 19 Feb 2024 01:57:06 +0000
Subject: [PATCH] default settings GPIO PA4 PA6 PA3 PB5
---
kernel/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 51 ++++++++++++++++++++++++++++++++-------------------
1 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/kernel/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/kernel/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
index 5b8c08c..cd8f9a48 100644
--- a/kernel/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
+++ b/kernel/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
@@ -313,7 +313,17 @@
return ret;
}
+/* In the Physical Function Driver Common Code, the ADVERT_MASK is used to
+ * mask out bits in the Advertised Port Capabilities which are managed via
+ * separate controls, like Pause Frames and Forward Error Correction. In the
+ * Virtual Function Common Code, since we never perform L1 Configuration on
+ * the Link, the only things we really need to filter out are things which
+ * we decode and report separately like Speed.
+ */
#define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
+ FW_PORT_CAP32_802_3_PAUSE | \
+ FW_PORT_CAP32_802_3_ASM_DIR | \
+ FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M) | \
FW_PORT_CAP32_ANEG)
/**
@@ -379,9 +389,7 @@
return cc_fec;
}
-/**
- * Return the highest speed set in the port capabilities, in Mb/s.
- */
+/* Return the highest speed set in the port capabilities, in Mb/s. */
static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
{
#define TEST_SPEED_RETURN(__caps_speed, __speed) \
@@ -1457,6 +1465,7 @@
* @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
* @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
* -1 no change
+ * @sleep_ok: call is allowed to sleep
*
* Sets Rx properties of a virtual interface.
*/
@@ -1896,23 +1905,23 @@
/**
* t4vf_handle_get_port_info - process a FW reply message
* @pi: the port info
- * @rpl: start of the FW message
+ * @cmd: start of the FW message
*
* Processes a GET_PORT_INFO FW reply message.
*/
static void t4vf_handle_get_port_info(struct port_info *pi,
const struct fw_port_cmd *cmd)
{
- int action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
- struct adapter *adapter = pi->adapter;
- struct link_config *lc = &pi->link_cfg;
- int link_ok, linkdnrc;
- enum fw_port_type port_type;
- enum fw_port_module_type mod_type;
- unsigned int speed, fc, fec;
fw_port_cap32_t pcaps, acaps, lpacaps, linkattr;
+ struct link_config *lc = &pi->link_cfg;
+ struct adapter *adapter = pi->adapter;
+ unsigned int speed, fc, fec, adv_fc;
+ enum fw_port_module_type mod_type;
+ int action, link_ok, linkdnrc;
+ enum fw_port_type port_type;
/* Extract the various fields from the Port Information message. */
+ action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
switch (action) {
case FW_PORT_ACTION_GET_PORT_INFO: {
u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
@@ -1972,6 +1981,7 @@
}
fec = fwcap_to_cc_fec(acaps);
+ adv_fc = fwcap_to_cc_pause(acaps);
fc = fwcap_to_cc_pause(linkattr);
speed = fwcap_to_speed(linkattr);
@@ -2002,14 +2012,19 @@
}
if (link_ok != lc->link_ok || speed != lc->speed ||
- fc != lc->fc || fec != lc->fec) { /* something changed */
+ fc != lc->fc || adv_fc != lc->advertised_fc ||
+ fec != lc->fec) {
+ /* something changed */
if (!link_ok && lc->link_ok) {
lc->link_down_rc = linkdnrc;
- dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
- pi->port_id, t4vf_link_down_rc_str(linkdnrc));
+ dev_warn_ratelimited(adapter->pdev_dev,
+ "Port %d link down, reason: %s\n",
+ pi->port_id,
+ t4vf_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;
+ lc->advertised_fc = adv_fc;
lc->fc = fc;
lc->fec = fec;
@@ -2121,8 +2136,6 @@
return 0;
}
-/**
- */
int t4vf_prep_adapter(struct adapter *adapter)
{
int err;
@@ -2174,14 +2187,14 @@
* t4vf_get_vf_mac_acl - Get the MAC address to be set to
* the VI of this VF.
* @adapter: The adapter
- * @pf: The pf associated with vf
+ * @port: The port associated with vf
* @naddr: the number of ACL MAC addresses returned in addr
* @addr: Placeholder for MAC addresses
*
* Find the MAC address to be set to the VF's VI. The requested MAC address
* is from the host OS via callback in the PF driver.
*/
-int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int pf,
+int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int port,
unsigned int *naddr, u8 *addr)
{
struct fw_acl_mac_cmd cmd;
@@ -2199,7 +2212,7 @@
if (cmd.nmac < *naddr)
*naddr = cmd.nmac;
- switch (pf) {
+ switch (port) {
case 3:
memcpy(addr, cmd.macaddr3, sizeof(cmd.macaddr3));
break;
--
Gitblit v1.6.2