From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart
---
kernel/drivers/leds/leds-ktd2692.c | 13 +++++--------
1 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/kernel/drivers/leds/leds-ktd2692.c b/kernel/drivers/leds/leds-ktd2692.c
index 02738b5..f341da1 100644
--- a/kernel/drivers/leds/leds-ktd2692.c
+++ b/kernel/drivers/leds/leds-ktd2692.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* LED driver : leds-ktd2692.c
*
* Copyright (C) 2015 Samsung Electronics
* Ingi Kim <ingi2.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/delay.h>
@@ -22,7 +19,7 @@
/* Value related the movie mode */
#define KTD2692_MOVIE_MODE_CURRENT_LEVELS 16
#define KTD2692_MM_TO_FL_RATIO(x) ((x) / 3)
-#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE 8
+#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE 8
/* Value related the flash mode */
#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8
@@ -253,7 +250,7 @@
ktd2692_expresswire_reset(led);
gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
- ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+ ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
| KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
| KTD2692_REG_FLASH_CURRENT_BASE);
@@ -273,11 +270,11 @@
static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
struct ktd2692_led_config_data *cfg)
{
- struct device_node *np = dev->of_node;
+ struct device_node *np = dev_of_node(dev);
struct device_node *child_node;
int ret;
- if (!dev->of_node)
+ if (!dev_of_node(dev))
return -ENXIO;
led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS);
--
Gitblit v1.6.2