From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart

---
 kernel/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts |   15 +--------------
 1 files changed, 1 insertions(+), 14 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/kernel/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index 649e313..d5f6aeb 100644
--- a/kernel/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/kernel/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -54,8 +54,6 @@
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -71,7 +69,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -82,17 +80,6 @@
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
-	};
-};
-
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
-&r_pio {
-	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
 	};
 };
 

--
Gitblit v1.6.2