From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart

---
 kernel/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts |   66 +++++++-------------------------
 1 files changed, 15 insertions(+), 51 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/kernel/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 2c902ed..d6bb82c 100644
--- a/kernel/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/kernel/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -97,8 +97,8 @@
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_b>;
-	phy = <&phy1>;
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -117,8 +117,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -130,11 +128,9 @@
 #include "axp152.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c16";
 		pagesize = <16>;
 		reg = <0x50>;
@@ -143,8 +139,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -152,35 +146,35 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -197,8 +191,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -206,8 +198,6 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
@@ -223,33 +213,10 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-		pins = "PG13";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PE3";
 		function = "gpio_out";
 		drive-strength = <20>;
-	};
-
-	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG12";
-		function = "gpio_in";
-		bias-pull-up;
 	};
 };
 
@@ -259,15 +226,14 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_b>,
-		    <&spi2_cs0_pins_b>;
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
 	status = "okay";
 };
 
@@ -277,19 +243,19 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_b>;
+	pinctrl-0 = <&uart2_pc_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>;
 	status = "okay";
 };
 
@@ -299,9 +265,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";

--
Gitblit v1.6.2