From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart
---
kernel/arch/arm/boot/dts/imx6sll.dtsi | 157 ++++++++++++++++++++++++++++++++++++----------------
1 files changed, 108 insertions(+), 49 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/imx6sll.dtsi b/kernel/arch/arm/boot/dts/imx6sll.dtsi
index 7c7d5c4..3659fd5 100644
--- a/kernel/arch/arm/boot/dts/imx6sll.dtsi
+++ b/kernel/arch/arm/boot/dts/imx6sll.dtsi
@@ -36,6 +36,8 @@
spi1 = &ecspi2;
spi3 = &ecspi3;
spi4 = &ecspi4;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
@@ -49,21 +51,20 @@
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 996000 1275000
- 792000 1175000
- 396000 1075000
- 198000 975000
- >;
- fsl,soc-operating-points = <
+ <996000 1275000>,
+ <792000 1175000>,
+ <396000 1075000>,
+ <198000 975000>;
+ fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
- 996000 1175000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <996000 1175000>,
+ <792000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
<&clks IMX6SLL_CLK_PLL2_PFD2>,
<&clks IMX6SLL_CLK_STEP>,
@@ -71,16 +72,9 @@
<&clks IMX6SLL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
- };
-
- intc: interrupt-controller@a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- interrupt-parent = <&intc>;
};
ckil: clock-ckil {
@@ -111,16 +105,6 @@
clock-output-names = "ipp_di1";
};
- tempmon: temperature-sensor {
- compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gpc>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
- };
-
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -131,9 +115,21 @@
ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
- L2: l2-cache@a02000 {
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
+ };
+
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -143,7 +139,7 @@
arm,data-latency = <4 2 3>;
};
- aips1: aips-bus@2000000 {
+ aips1: bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -233,7 +229,7 @@
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x02018000 0x4000>;
- interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
@@ -268,7 +264,7 @@
status = "disabled";
};
- ssi1: ssi-controller@2028000 {
+ ssi1: ssi@2028000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -281,7 +277,7 @@
status = "disabled";
};
- ssi2: ssi-controller@202c000 {
+ ssi2: ssi@202c000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -294,7 +290,7 @@
status = "disabled";
};
- ssi3: ssi-controller@2030000 {
+ ssi3: ssi@2030000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -328,7 +324,7 @@
clocks = <&clks IMX6SLL_CLK_PWM1>,
<&clks IMX6SLL_CLK_PWM1>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm2: pwm@2084000 {
@@ -338,7 +334,7 @@
clocks = <&clks IMX6SLL_CLK_PWM2>,
<&clks IMX6SLL_CLK_PWM2>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm3: pwm@2088000 {
@@ -348,7 +344,7 @@
clocks = <&clks IMX6SLL_CLK_PWM3>,
<&clks IMX6SLL_CLK_PWM3>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm4: pwm@208c000 {
@@ -358,7 +354,7 @@
clocks = <&clks IMX6SLL_CLK_PWM4>,
<&clks IMX6SLL_CLK_PWM4>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
gpt1: timer@2098000 {
@@ -375,10 +371,12 @@
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
@@ -386,10 +384,12 @@
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
@@ -397,10 +397,14 @@
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
@@ -408,10 +412,20 @@
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
@@ -419,10 +433,22 @@
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
@@ -430,6 +456,7 @@
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -475,7 +502,7 @@
anatop: anatop@20c8000 {
compatible = "fsl,imx6sll-anatop",
"fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x4000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -497,6 +524,16 @@
anatop-max-voltage = <3400000>;
anatop-enable-bit = <0>;
};
+
+ tempmon: temperature-sensor {
+ compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpc>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+ };
};
usbphy1: usb-phy@20c9000 {
@@ -515,7 +552,7 @@
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USBPHY2>;
- phy-reg_3p0-supply = <®_3p0>;
+ phy-3p0-supply = <®_3p0>;
fsl,anatop = <&anatop>;
};
@@ -536,6 +573,7 @@
regmap = <&snvs>;
offset = <0x38>;
mask = <0x61>;
+ status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
@@ -544,6 +582,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};
@@ -562,7 +601,6 @@
#interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
};
iomuxc: pinctrl@20e0000 {
@@ -588,7 +626,7 @@
};
sdma: dma-controller@20ec000 {
- compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+ compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_IPG>,
@@ -597,6 +635,15 @@
#dma-cells = <3>;
iram = <&ocram>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+ };
+
+ pxp: pxp@20f0000 {
+ compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+ reg = <0x20f0000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PXP>;
+ clock-names = "axi";
};
lcdif: lcd-controller@20f8000 {
@@ -610,7 +657,7 @@
status = "disabled";
};
- dcp: dcp@20fc000 {
+ dcp: crypto@20fc000 {
compatible = "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -621,7 +668,7 @@
};
};
- aips2: aips-bus@2100000 {
+ aips2: bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -739,14 +786,26 @@
mmdc: memory-controller@21b0000 {
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
};
- ocotp: ocotp-ctrl@21bc000 {
+ rngb: rng@21b4000 {
+ compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
+ reg = <0x021b4000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>;
+ };
+
+ ocotp: efuse@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx6sll-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SLL_CLK_OCOTP>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
tempmon_calib: calib@38 {
reg = <0x38 4>;
@@ -767,7 +826,7 @@
compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
- interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
--
Gitblit v1.6.2