From 748e4f3d702def1a4bff191e0cf93b6a05340f01 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:41:34 +0000
Subject: [PATCH] add gpio led uart
---
kernel/arch/arm/boot/dts/exynos4412-origen.dts | 74 +++++++++++++++++++++---------------
1 files changed, 43 insertions(+), 31 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/exynos4412-origen.dts b/kernel/arch/arm/boot/dts/exynos4412-origen.dts
index 346f719..e2d76ea 100644
--- a/kernel/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/kernel/arch/arm/boot/dts/exynos4412-origen.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "exynos-mfc-reserved-memory.dtsi"
@@ -25,8 +26,7 @@
};
chosen {
- bootargs ="console=ttySAC2,115200";
- stdout-path = &serial_2;
+ stdout-path = "serial2:115200n8";
};
firmware@203f000 {
@@ -34,20 +34,13 @@
reg = <0x0203F000 0x1000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mmc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ mmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
display-timings {
@@ -82,20 +75,30 @@
cpu0-supply = <&buck2_reg>;
};
+&cpu_thermal {
+ cooling-maps {
+ cooling_map0: map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
+ };
+ cooling_map1: map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+ <&cpu2 13 13>, <&cpu3 13 13>;
+ };
+ };
+};
+
&exynos_usbphy {
status = "okay";
};
&ehci {
- samsung,vbus-gpio = <&gpx3 5 1>;
+ samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
status = "okay";
-
- port@1 {
- status = "okay";
- };
- port@2 {
- status = "okay";
- };
+ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+ phy-names = "hsic0", "hsic1";
};
&fimd {
@@ -141,6 +144,13 @@
<1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>;
+
+ s5m8767_osc: clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s5m8767_ap", "s5m8767_cp",
+ "s5m8767_bt";
+ };
regulators {
ldo1_reg: LDO1 {
@@ -369,7 +379,7 @@
};
buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
+ regulator-name = "VDD_MIF";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
@@ -378,7 +388,7 @@
};
buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
+ regulator-name = "VDD_ARM";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
@@ -387,7 +397,7 @@
};
buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
+ regulator-name = "VDD_INT";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
@@ -396,7 +406,7 @@
};
buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
+ regulator-name = "VDD_G3D";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
@@ -405,7 +415,7 @@
};
buck5_reg: BUCK5 {
- regulator-name = "vdd_m12";
+ regulator-name = "VDD_M12";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
@@ -414,7 +424,7 @@
};
buck6_reg: BUCK6 {
- regulator-name = "vdd12_5m";
+ regulator-name = "VDD12_5M";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
@@ -423,7 +433,7 @@
};
buck9_reg: BUCK9 {
- regulator-name = "vddf28_emmc";
+ regulator-name = "VDDF28_EMMC";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
@@ -512,6 +522,8 @@
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
&sdhci_2 {
--
Gitblit v1.6.2